Labin Services
Labin Services


Home

Profile

Products

Contact Us

Home » Products » Gas Handling Accessories


Gas Handling Accessories

We manufacture wide variety of Gas Handling Accessories which are provided to our clients only after it undergoes safety tests. Our gas accessories meet the industrial norms and can be customized as per our clients requisite. These gas accessories are highly durable, have high tolerance level, abrasion resistant and work efficiently under adverse conditions.

Cylinder Trolley And Mounting Brackets


Cylinder Trolley And Mounting Brackets

Cylinder Hand Trolley Jumbo type (47 Ltr.) For Single OR Two Cylinder:

 

Cylinder trolleys are specially designed to hold and easily transport heavy gas cylinders from one place to another place. Trolleys are finished ith scratch resistant, high gloss, electrostatically applied ovn baked powder coat.

 

Big Jumbo Type (47 Ltr.), having Four wheels, Two are solid rubber front wheels and two rear casters, that falls into place when in use, to provide greater stability. Trolleys are epoxy powder coated and provided with safety chain for securing the cylinders, can carry one jumbo cylinder at a time.

Cylinder Hand Trolley Small Cylinder (for 10.2 Ltr.)

 

Small Cylinder (for 10.2 Ltr.), having only Two wheels. Trolleys are epoxy powder coated and provided with safety chain for securing the cylinders, can carry one small cylinder at a time.

 

Cylinder Holding Stand:

 

If you are going to remove the Cylinder from the trolley and going to place it free (Loose) in the Lab / Floor, It is highly recommended that you keep them fastened with wall Mounting Brackets in order to avoid fall of cylinders accidentally.

 

M.S. Epoxy powder coated with Safety Chain for securing the cylinders

 

(Usually two wall mounting brackets are recommended for each cylinder, one on lower side & one on upper side.)





High Pressure Gas Manifold Systems

Manual Gas manifold is used to connect with two or more cylinders on single high pressure regulator. In this system if one cylinder gets empty we can immediately switch on to another cylinder (Manually OR Automatically) without halting the analysis and avoid the dismantling the regulators from the empty cylinder and refitted on filled cylinder. (I.e. less the leakages possibilities). The manifold Header is also available for more than two cylinders.

 

MOC: S.S.304, 50mm Sq. bar stock bar with Isolation Valves as per IS: 3224 and M.S. epoxy powder coated wall mounting bracket connected with:

 

Pigtails - ¼” ID x 1 mtr. Long plain Teflon tube with outer S.S. Wire braiding. Both end 5/8” BSP [RH/LH] Male Bull Nozzle as per IS : 3224 Connect for Cylinder to Manifold

 

Auto Manifold (Mechanical) -

 

High Pressure mechanical automatic change manifold. We can connect two cylinders of same gases where inbuilt cut off pressure system. The cut off pressure is done by differential pressure regulators and the change over of the cylinder is done as per differential pressure is set and cylinder automatically changes from one to another.

 



High Pressure Gas Manifold Systems




UHP Grade Laboratory Gas Cylinders


UHP Grade Laboratory Gas Cylinders

A high pressure gas cylinders serves as the source of carrier gases and flame purpose in the gas chromatography analysis and other research instruments applications and these cylinders filled with specially uhp grade gases (pure gases) for high performance, brand new, empty high pressure seamless steel cylinder, indigenous make, cylinders are ISI marked, confirming is:7285 specification, flat bottom fitted with valve as per is:3224, complete with neck ring & cap, painted as specified under gas cylinder rules 1981. Supported with following documents:


a) ISI inspection / test certificate

b) Hydraulic test certificate

c) Approval certificate from chief controller of explosives, govt.


Specification: max. Permissible impurities (ppm by vol.)

 

Type

Air

N2

H2

He

Ar

Acety

N2O

Co2

Grade

uhp gr.

99. 999%

99. 999%

99. 999%

99. 999%

99. 99%

99. 98%

99. 99%

Capacity

47 ltr.

47 ltr.

47 ltr.

47 ltr.

47 ltr.

41 ltr.

47 ltr.

47 ltr.

 

 





Dual Stage Cylinder Pressure Regulators

  • A pressure regulator is used to assure a uniform pressure to the column inlet, and thereby a constant rate gas flow.
  • Labin regulators have S. S. Diaphragm for high pressure control. S. S. Diaphragm is not subject to the diffusion and off gassing associated with neoprene of atmospheric contaminants when put in to service
  • Labin regulators is highly recommended for services require a constant delivery pressure for chromatography analysis.
  • Labin regulators made from brass bar stock provide optimum performance for most analytical application.

 

Body

Brass Chrome Plated / S. S. 316

Diaphragm

s. S. 304 / s. S. 316

Diaphragm seal

Teflon

Inlet pressure

0 to 280kg/cm2

Outlet pressure

0 to 16kg/cm2

State

Diffusion Resistant

Pressure gauge

Wika (Germany)

 



Dual Stage Cylinder Pressure Regulators




Gas Piping In Ferrule Fitting


Gas Piping In Ferrule Fitting

A Pipe Ferrule is a type of pipe fitting, which is used for joining or binding one part to another (as pipe sections). Manufactured from high quality raw material, a pipe ferrule is fitted with a circular clamp used to attach and hold together fibers, wires or posts. It is a kind of a ring or cap, which is attached to an object to provide safety against damage, splitting or wear. It also works as a circular fitting device used to hold the pipes together. We make available these pipe ferrules in various sizes. Our engineers also offer our clients larger sized pipe ferrules that are specially designed to have special hardening processes. It make these to provide better leak resistance and tube holding capacity at higher pressures.





Gas Piping In Argon Welding

Considering the importance of Gas Piping in a cogen power plant, we offer our clients a broad assortment of Gas Piping in Argon Welding. A leakage can be extremely dangerous specially if it gets exposed to even a small ignition of a spark. So, extra precaution needs to be taken during selection and the installation of gas piping. It is highly recommended to use at least a Seamless Pipe along with Seamless Fittings for this application. The pipes used in this case are Seamless 4″ A53 GrB Pipes that are fully certified by the pipe manufacturer.

 

Gas pipes require a good quality and safety issues. So, it requires X-Ray 100% of Penetration Test. In order to ensure quality, spooling of the gas pipes are generally welded off-line or outside the premises of the installation site. It helps to enclose the area preventing the air flow from affecting the argon gas welding of the pipe joints. After spooling gets over, it is installed at site and welded together. This procedure reduces the chances of reject during X-ray test.

 



Gas Piping In Argon Welding




Gas Piping In Orbital Welding


Gas Piping In Orbital Welding

It gives us immense pleasure to offer our clients a broad collection of Orbital Welding Systems that is used for pipes and tubes. The basic principles of orbital tube welding should be clear to understand the optimum weld procedure for any application. In order to meet the growing demands of the semiconductor, pharmaceutical, medical, vacuum, aerospace and instrumentation industries, we have implemented ultra high purity orbital welding and fabrication techniques.









Contact Us
Labin Services
Mr. Kailas D. Mali (Proprietor)
104, Tulip Residency, Mhatre Industrial Estate, Behind Lalit Kanta, M.I.D.C. 2
Dombivli - 421204, Maharashtra, India

Contact via E-mail



Home  |  Profile  |  Products  |   Trade Offers (20)  |  Site Navigation  |  Contact Us

Member IndiaMART.com © Labin Services. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited