Electrical Products

•  High-resolution encoder: 131072 pulses (17-bit)
•  Ensures stable performance even at low speed
•  Vibration suppressing control function equipped as standard
•  Suppresses mechanical vibration to the limit
• Two RS-485 ports as standard
•  Realizes the integral control of parameters (Maximum 31-axis connection)

• Economical solution for variable speed AC motor control
• Sensorless vector control provides excellent speed   regulation and up to 50:1 speed range
• Designed to match motor specifications; no parameter setup required
• Eliminate problems associated with Reflected Wave Phenomenon by eliminating long motor leads
• IP65 rating for harsh environment
• No panel space required
• Cost savings in enclosure and installation labor
• Supplied standard with SEW motor certified by CSA for Inverter Duty
• Retrofit kit allows field modification of existing across- the- line motors
• Adjustable carrier frequency to 16kHz for quiet operations
• 24V discrete inputs

• 0.5 - 5 HP with input voltage 380 - 500 VAC ± 10% 50/60 Hz
• 0.5 - 3 HP with input voltage 200 - 240 VAC ± 10% 50/60 Hz
• Frequency range: 2 - 100 Hz
• Integrated speed pot for local speed control
• Standard 4-quadrant operation with integrated brake resistance
• Status LED indicates fault/status type
• 2 preset speeds
• Fault relay output (SPDT)
• Standard RS 485 interface (MOVILINK® protocol)
• Protective functions - overload (motor, brake, and inverter), overvoltage, phase failure

• External set point converter MWA 11A converts 0...10VDC or 4...20mA to RS 485
• Full-featured keypad MKP 11A for run/stop, speed, direction control and alternate units display
• Digital speed display/adjustment keypad MBG 11A
• Digital speed display/adjustment keypad integrated with 24VDC supply MLG 11A
• PROFIBUS® DP, DeviceNet
• INTERBUS and CAN open interface with additional auxiliary discrete I/O (4 inputs/2 outputs or 6 inputs)
• AS-interface (4-bit) with 2 additional auxiliary inputs
• MDG Diagnostics unit for displaying motor current, operating, input terminal, message relay & brake status information

AXOR DC Drives offered by us come with features like CD180, Manual CD 180 (GB)02[1], Microspeed Plus -gb[1] and Micro DC Drive. Further, these also feature Power Supply Parts, Transformers for Micro and AXOR Fast-Back digital drive and motor

• 115 to 230 Volt Single Phase AC Input Power
• Resolver or Encoder Feedback
• Integrated Power Supply
• Fully Digital Control

• Advanced patented sinewave commutation technology, provides smooth, precise low-speed control and, high-speed performance.
• Accurate torque control due to precision balanced current, loops with closed loop sensors.
• Velocity loop bandwidths to 400 Hz.
• Self-tuning to the load
• Patented torque angle control enhances motor performance.
• Fully digital control loops.
• Compact and attractive rugged metal package for, space-saving, modern appearance - metal package, minimizes electrical noise.
• Pole Placement, PI, and PDFF control options.
• Low Pass or Notch Filters for compliant & resonance, machines.
• Command modes: Torque (analog or serial); Velocity, (analog or serial); Position (analog, serial or pulse)
• Two current ratings: 3 & 6 amp RMS/phase continuous
• 3 to 1 peak/continuous current rating.
• Run time counter

• 14 Bit analog conversion motion indexing,
• Simple absolute & incremental thru internal, profile generator.

• Built in encoder equivalent output can eliminate the need, for an additional position feedback device.
• RS232 or RS485 Communication.
• Unique multi-drop configuration allows a PC or PLC to, communicate to multiple SERVO, STAR CD amplifiers via, single RS-232 connection.
• SERVO, STAR CD’s versatile communication capabilities, make it easy to integrate machine control data directly, from the factory floor to your information system.
• Analog ±10V, pulse/direction, master encoder, serial port, command options.

• Excellent protection against miswired connection on 24, Volt I/O,
• ESD rugged circuit design and fully metallic enclosure.
• Self-protecting intelligent power modules.
• Full protection against short circuit, overvoltage, undervoltage, heatsink overtemperature, motor overtemperature, overspeed, overcurrent and feedback loss.
• UL, cUL listed, and CE
• Flash memory
  

Incremental encoders offered by us feature use of optical disk that turns with the shaft of the encoder. The infrared-light beam emitted by LED is picked up by sensors after having passed through the index grating & disk grating. With index grating fixed to the main body, the smallest turn of disk generates a modulation of light which is received by the sensors. This is then processed by electronic circuit of the encoder & transformed into an electrical signal, which is compatible with most measuring as well as controlling systems. The number of pulses (PPR) generated from complete shaft rotation also corresponds to the number of lines on disk. The quality & stability of the signal as well as reliability of the encoder during service depends on.

• The accuracy of the production and assembly of the mechanical parts

• The accuracy and stability of the optical disk

• The dimensional stability of the main body

• The strict selection of the electronic components

• Scale housing in extruded anodized aluminium TA 16 - size mm 39 x 23 - section 461 mm² - weight Kg/m 1.245
  
• Flexible coupling for compensation of dis-alignments and self correction of mechanical hysteresis   
• Lip seals for the protection of the internal grating made of rubber elastomeric 70
• Slider set composed by reader head (P) and tie rod (T)
•  The housing of circuit is water proof by use of a gasket & steel cover (with incorporated cable clamp)
• Hybrid circuit for generation of signals
• Accurate calibration of signals prevents any further unbalance (calibrated resistors substitute potentiometers normally used)
• Internal gasket for further protection (double barrier prevents any infiltration of pollutants)
•  Stainless steel grating (size mm 18 x 0.305 in a single piece also in "modular" scales)
•  Grating kept in position by scale housing which leaves it free to expand without deformation in case of faulty installation
•  Lateral fixing of the grating  

• the advantage 400 is a cnc system up to 5 axis
• available with +/-10v & stepper output
• system based on powerful pmac2 axis controller in association with embedded pc104 computer
• front panel includes flat screen, f-keys & keyboard for easy programming, debugging & management of the machine
• back panel includes all connectors for easy & complete machine connection

• 8. 4 inch lcd tft color flat panel monitor
• 800x600 display
• complete cnc standard keyboard with alphanumeric keys
• f1-f10 functions keys
• cycle start / cycle stop / reset buttons
• feed-rate potentiometer
• hand-wheel 50 ppr
• usb-interface for keyboard
• other usb compatible peripherals

• 586, 166 mhz cpu
• 128mb sdram
• 16mb flash disk
• windows ce. Net operating system
• optional flash memory 32/64/128 mb and ethernet rj 45 interfacepowerful multi-axis controller.
• based on delta tau’s pmac2 technology
• 40 mhz dsp563xx cpu (80 mhz 560xx equivalent)
• 128k x 24 internal zero-wait-state sram
• 512k x 8 flash memory for user backup & firmware

• provides all pages to monitor, create and control the cnc machine
• simple and quick to set up position display, program editor, messages, tools management
• rs274 g-code language with linear, circular & spline interpolations
• dnc-interface for running long programs from external memory
• coming with up to 64 plc’s for i/os and machine sequences management

• in/out 32 inputs 12 - 30v, opto-isolated sourcing
• 16 outputs 30v screw terminals
• amp 1 +/10v axes
• command signal: ampena, amp-flt
• flg 1 limit +, limit-, home, user inputs
• stp pulse-direction interface for axes 1 – 4
• enc1. Enc4 4 x rs422 encoder input 5v, max 10mhz frequency
• enc 5 / hw1 1 x rs422 encoder input 5v, max 10mhz frequency (for 5th axes or hand-wheel)