CNC Press Brake Hydraulics Pumps

all necessary valves are compactly grouped together in one control block.

the suction valves are arranged on the cylinder base.

two variants are available:   
  - with integrated load-sensing module to increase the energy efficiency and  thus reduce the heating of the oil
  - without load-sensing module.

interfaces on the modules allow the attachment of options.

in conjunction with a cnc-control unit and a position transducer on the machine a high degree of positioning precision with optimum synchronous operation is achieved.

the hydraulic control unit fulfils uvv guidelines and is certified by the professional association.

the absolutely compact pvm central hydraulics solution results from the combination of one integrated ipv press valve per cylinder with the plm power module.

the suction valves are arranged on the cylinder base.

interfaces on the modules allow the attachment of options.

in combination with a cnc-control unit and a position transducer on the machine a high degree of positioning precision with optimum synchronous operation is achieved.

the hydraulic control unit fulfils uvv guidelines and is certified by the professional association.

cylinder block including suction valve for installation in the cylinder optionally with:   
- plm power module,  internal gear pump, hydraulic oil filter with electrical contamination gauge, proportional pressure control and actuation of the suction valves are grouped together in a absolutely compact unit;
or alternatively the
- apb pump block

in each case different nominal sizes permit an optimal adjustment to the machine size.

interfaces on the modules allow the attachment of options.

in conjunction with a cnc-control unit and a position transducer on the machine a high degree of positioning precision with optimum synchronous operation is achieved.

the hydraulic control unit fulfils uvv guidelines and is certified by the professional association.

press cylinders and hydraulic control unit are ideally combined in the integrated ipa press drive.

all hydraulic valves and sensors necessary for closed-loop control and high retaining are integrated into the one-piece cylinder housing.

this system is supplemented by the plm power module. The internal gear pump, hydraulic oil filter with electrical contamination gauge, proportional pressure control and actuation of the suction valves are grouped together in a absolutely compact unit.

interfaces on the modules allow the attachment of options.

in conjunction with a cnc-control unit and a position transducer on the machine a high degree of positioning precision with optimum synchronous operation is achieved.

the hydraulic control unit fulfils uvv guidelines and is certified by the professional association.

the cylinder control block with integrated suction valve is completed by the integrated ipv press valve.  

the system is supplemented by the
- plm power module, internal gear pump, hydraulic oil filter with electrical contamination gauge, proportional pressure control and actuation of the suction valves are grouped together in a absolutely compact unit;
or alternatively the
- apb pump block

in each case different nominal sizes permit an optimal adjustment to the machine size.

interfaces on the modules allow the attachment of options.

in conjunction with a cnc-control unit and a position transducer on the machine a high degree of positioning precision with optimum synchronous operation is achieved.

the hydraulic control unit fulfils uvv guidelines and is certified by the professional association.