Warpp - Welding Machine

INTIG-i Series machines are IGBT inverter based arc welding power source with soft switching technology. Inverter MMA/TIG welding machine are widely used for manual metal arc welding with acid and basic electrodes and for TIG welding of various metals except Al. & Mg.

Features :

• Advanced Soft Switching inverter technology and high efficiency.
• Digital display of current with precise preset function.
• High Power factor.
• High Switching frequency, hence low volume and weight.
• Adjustable arc force in MMA.
• Built in High Frequency.
• 2/4 Track function in TIG.
• Adjustable Down Slope function in TIG.
• Can be used with extended welding cable in MMA

Basic Outfits:

• Power Source,
• Remote socket for Torch trigger

Optional:

• TIG Welding Torch
• Argon Regulator
• Water Circulation System.
• Wired Remote Controller

Technical Specifications:

Model	Input Power (KVA)	Current Range (A)	Weight (Kg)
INTIG-315 i	13.8	20~315	34
INTIG - 400 i	18.4	30-400	43
INTIG - 500 i	25	20-500	47
INTIG - 630 i	35	25-630	53

• Input Supply - 380-440 V 3-phase 50 Hz Supply
• Open Circuit voltage - 75 Volts
• Efficiency at full load (%) - 89
• Power Factor - 0.95
• Duty Cycle - 60% (40°C & 10 Min.)

INMIG-i Series welders are Semi-Automatic Gas Shielded Metal Arc Welding machines, Mig Welding machines or Mag welding machines with advanced wave control technology. These Mig/Mag Welding Machines are available in 250, 350, 500 and 630 Amps range.

Features:

• Advanced Soft Switching inverter technology, low spatter.
• Continuous adjustment of welding voltage and current.
• Stow start facilitates easy arc striking.
• Reduced melting ball at the end of welding.
• High operating frequency hence small size and weight
• High power factor & Efficiency.
• Preset Digital Display of Welding voltage and current.
• Default Current / Voltage match makes it easy for operation.

Basic Outfits:

• Power Source
• Wire feeder
• MIG Torch
• Regulator-flow meter - Heater
• 5 Meters of interconnecting cable

Technical Specifications:

Model	Input Power (KVA)	Current Range (A)	Voltage Range (V)	Power Factor	Weight (Kg}
INMIG-250 i	8	50~250	17~27	0.95	20
INMIG-350 i	14.4	14.4	17~31	0.87	40
INMIG-500 i	25	60~500	17~39	0.87	50
INMIG-6301	35.8	60~630	17~44	0.87	58

• Input Supply- 380~ 440 V 3-Phase 50 Hz Supply
• Efficiency at full load (%) - 89
• Duty Cycle - 60% (40°C & 10 Win.)

INTIG-AC/DC Series machines are microprocessor controlled fully digital IGBT inverter based arc welding power source with soft switching technology. Square wave tig welding machine are widely used for DC TIG, DC PULSE TIG AC Square wave TIG and AC Pulse TIG welding in various metals including Al. and Mg alloy.

Features:

• Microprocessor controlled technology.
• Advanced Soft Switching inverter technology.
• Adjustable Pre-flow, Post-flow, Up-Slope, Down-Slope.
• Adjustable Ac Balance, Pulse ratio, Ac frequency.
• Easy operation as it is single knob control.
• Digital display of current with precise preset function.
• High Power factor & Efficiency.
• High Switching Frequency, hence low volume & weight.
• Built in High Frequency.

Basic Outfits:

• Power Source,
• Remote socket for Torch trigger

Optional:

• TIG Welding Torch
• Water Circulation system

Technical Specifications:

Model	Input Power (KVA)	Current Range (A)	Weight (kg)
INTIG-315AC/DC	13	2-315	35
INTIG-500 AC/DC	18.2	20-500	45
INTIG-630 AC/DC	30	20-630	55

• Input Supply - 380-440 V 3-phase 5DHz Supply
• Pulse Frequency (Hz) - 0.2-50
• AC Frequency (Hz) - 20-200
• Efficiency at full load (%) - 89
• Power Factor - 0.95
• AC Balance - -50% - + 40 %
• Pulse Ratio - - 40% - + 40 %
• Duty Cycle - 60% (40°C & 10 Min.)

AUTOWELD-i Series machines are Inverter based submerged arc welding machine with suitable tractor. This inverter submerged arc welding machine can be used for both SAW and MMA welding.

Features:

• Advanced Soft Switch inverter technology.
• Can be used for SAW, WMA and Gouging.
• High Duty Cycle
• Least affected by input voltage fluctuation.
• Under Voltage, Over Heat and over Voltage Protection.

Technical Specifications:

Model	Input Power (KVA)	Current Range (A)	Weight (Kg)
AUTOWELD - 600 i	27	60~630	55
AUTOWELD - 800 i	35	60~800	80
AUTOWELD - 1000 i	44	60~1000	95
AUTOWELD - 1250 i	55	60~1250	100

• Input Supply - 380-440 V 3-phase 50Hz Supply
• Open Circuit voltage - 75
• Volts Efficiency at full load (%) - 89
• Power Factor - 0.95
• Duty Cycle -100%

Power Source:

• WTR-Series is magnetic amplifier type welding rectifier with an efficient electrical design.
• These welding Rectifiers are designed for round the clock welding applications.
• The use of three phase full wave Silicon rectifier along with a well designed magnetic amplifier gives a smooth and steady arc with minimum spatter and excellent welding characteristics.
• Warrp welding rectifiers are ideally suitable D.C power source for normal metal arc welding and TIG Welding.

Features:

• Efficient electrical design.
• Two ranges of current selection.
• Fully copper wound transformer with 'H' class insulation.
• Compact and sturdy with an aesthetic exterior.
• Easily maneuverable.
• Negligible maintenance.
• Fully Powder coated cabinet.