Double Column Bandsaw Machine offered by us has following componnets:

SAW HEAD: Saw head unit is supported by two rigid hard-chrome plated & ground vertical columns, which are guided by "INA" make PTFE self lubricated Bushes.

BLADE GUIDES: The Guide ensure accurate cutting & long blade life. They are factory set. It consists of spring loaded, self- adjusting carbide-faced inserts. Adjustment screws are provided to allow easy blade changing. The blade is guided by roller bearing & carbide wear pads.

SAW FEED: Saw head "up & down' motion is controlled by hydraulic cylinder and regulated by a pressure compensated flow control valve.

SPLIT FRONT VICE: This unique vice design permits the workpiece to be automatically indexed to a Reduce remnant of 50mm only. The vice securely clamps the workpiece on both side of the cut thus minimizing drop-off burrs.

NESTING FIXTURE / BUNDLE CLAMPING: A Nesting fixture set consists of hydraulicaly operated vertical clamps which are mounted on the rear and the front vices.

MODEL	LX - 210	LX - 300	LX - 400	LX - 530	LX - 650	LX - 800	LX - 1000	LX - 1200
Round - In mm	210	300	400	530	650	800	1000	1200
Square In mm	210 X 210	300 X 300	400 X 400	530 X 530	650 X 650	800 X 800	1000 X 1000	1200 X 1200
Cutting Speed mtlmin	20 - 80	20 - 80	20 - 80	15 - 75	15 - 75	15 - 75	15 - 75	15 - 75
Blade Size mm	4100 X 34 X 1.1	4570 X 41 X 1.3	5450 X 41 X 1.3	6900 X 54 X 1.6	8000 X 67 X 1.6	8800 X 67 X 1.6	12300 X 80 X 1.6	13900 X 80 X 1.6
Saw Motor Capacity H.P.	2 Hp	3 Hp	5 Hp	7.5 Hp	10 Hp	12.5 Hp	15 Hp	20 Hp
Hyd Motor Capacity HP.	1 Hp	1Hp	1 Hp

Features of our range of horizontal bandsaw machine:

• Endless circular 0.9mm Blade, So it has less material wastage
• Blade has circulating movement & moves in one direction only
• In one cycle time, The blade has continuous cutting and no idle stroke
• So less cutting time due to blade is always in contact with the material
• Less power consumption due to continuous cutting
• Arm has swing type action for smoother & faster cutting of larger section
• Efficient Self-Centering Vice for job Clamping
• Optional swivel vice for Angular Cutting
• Easy - Precise & Adjustable Gravity feeding control
• Optimum use of Bandsaw Blade. Since it can be rewelded Somany times
• Has heavy duty worm reduction drive
• Good Parallelism in cutting due to adjustable Blade guide
• Each & Every parts of the machine is easily repairable & replaceable

STANDARD ACCESSORIES:

• Drive Motor, Coolant Pump , V-Belt with worm & motor Pulley
• 1no. Carbon steel Bandsaw blade
• Chip removal wire Brush & Chip collection Tray
• Contactor & Push Buttons , Job Stopper assembly
• Oil filled worm reduction Gear Box & Hydraulic Jumper

OPTIONAL ACCESSORIES:

• Bimetal / Carbon steel Bandsaw Blade
• Job Roller Stand
• Swivel Vice for angular cutting
• Cutting feed controller with auto lifting attachment
• Variable frequency drive for Bandspeed control

TECHNICAL SPECIFICATIONS:

CUTTING CAPACITY

MODEL	LX - (T	LX - 1	LX - 1 HS	LX -10 HS	LX - 2 HS	LX - 3 HS	LX - 4 HS	LX - 5HS
Round mm	75	175	175	250	300	350	400	450
Square mm	75 X 75	150 X 150	150 X 150	200 X 200	250 X 250	300 X 300	350 X 350	400 X 400

DRIVE

Drive motor	0.5H.P. 1440 RPM	0.5H.P. 1440 RPM	1.0H.P. 1440 RPM	1.5 H.P. 1440 RPM	2 H.P. 10Q 0 RPM	2 H.P. 1D0 O RPM	2HP. 1000 RPM	2H.P JO0O RPM
Coolant Pump	0, 15 HP, 440 Volts	0.15 HP., 440 Vote	0.15 HP., 440 Volts	0.15 HP., 440 Volts	0.15 HP., 440 Volts	0.15 HP, 440 Volts	0.15 H.P, 440 Volts	0.15 HP., 440 Volts
Blade Speed	25 / 30 / 35	25 / 30 / 35	20 / 35	20 / 35	20 / 35	20 / 35	15 / 35	15 / 35
Meter / minute			55 / 75	55 / 75	55 / 75	55 / 75	55 / 75	55 / 75

DIMENSIONS

Bandsaw Blade - mm	2540 X 20 X 0.9	2540 X 20 X 0.9	3000 X 27 X 09	3505 X 27 X 0.9	3760 X 27 X 0.9	4100 X 34 X 1.1	4420 X 34 X 1.1	4570 X 41 X 1.3
Floor Space LxWxH mm	1500 X 570 X 870	1500 X 570 X 870	1630 X 580 X 895	2300 X 822 X 1000	2400 X 830 X 1050	2650 X 830 X 1200	2700 X 830 X 1200	2750 X 830 X 1200
Net Weight kg	272	272	322	550	600	700	800	950

Our range of Horizontal Metal Cutting bandsaw machine includes:

MODEL	LX - 210	LX - 300	LX - 400	LX - 530	LX - 650	LX - 800	LX - 1000	LX - 1200
Cutting Capacity
Round - In mm	210	300	400	530	650	800	1000	1200
Square In mm	210 X 210	300 X 300	400 X 400	530 X 530	650 X 650	800 X 800	1000 X 1000	1200 X 1200
Cutting Speed mtlmin	20 - 80	20 - 80	20 - 80	15 - 75	15 - 75	15 - 75	15 - 75	15 - 75
Blade Size mm	4100 X 34 X 1.1	4570 X 41 X 1.3	5450 X 41 X 1.3	6900 X 54 X 1.6	8000 X 67 X 1.6	8800 X 67 X 1.6	12300 X 80 X 1.6	13900 X 80 X 1.6
Saw Motor Capacity H.P.	2 Hp	3 Hp	5 Hp	7.5 Hp	10 Hp	12.5 Hp	15 Hp	20 Hp
Hyd Motor Capacity HP.	1 Hp	1Hp	1 Hp

BLADE GUIDES : The Guide ensure accurate cutting & long blade life. They are factory set. It consists of spring loaded, self- adjusting carbide-faced inserts. Adjustment screws are provided to allow easy blade changing. The blade is guided by Roller bearing & Carbide wear pads.

SAW FEED: Saw head "up & down' motion is controlled by hydraulic cylinder and regulated by a pressure compensated Flow control Valve.

JOB CLAMPING: This is controlled by hydraulic cylinder & valves. The jaws of the front & Rear vices are in one straight line and perpendicular to the Blade. The Movement of jaws of both the vices are controlled by hydrauliccylinderS Valves.

SPLIT FRONT VICE : This unique vice design permits the workpiece to be automatically indexed to a Reduce remnant of 50mm only. The vice securely clamps the workpiece on both side of the cut thus minimizing drop-off burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

AUTO LENGTH INDEXING & LENGTH COUNTER: The Automaticfeeding of job is aisodone by indexing. The feed length can set by means of Screw & Digital counter assembly with length accuracy of /- 0.2mm. The handwheel is provided to set the cutting length upto 400mm which can be read on digital counter in increment of 0.1mm. The multiple stroke makes it possible to multiply the number of index cycles when pieces longerthan 400mm are required. (Available in DCAAutomatic models).

NESTING FIXTURE / BUNDLE CLAMPING: ANesting fixture set consists of hydraulicaly operated vertical clamps which are mounted on the rear and the front vices. This makes it possible to cut multiple pieces at a time.

Technical Specifications of LX-1HS (Metal Cutting Bandsaw Machine)

Cutting Capacity:

MODEL	LX -0	LX - 1	LX - 1 HS	LX -10 HS	LX - 2 HS	LX - 3 HS	LX - 4 HS	LX - 5HS
Round mm	75	175	175	250	300	350	400	450
Square mm	75 X 75	150 X 150	150 X 150	200 X 200	250 X 250	300 X 300	350 X 350	400 X 400

DRIVE

Drive motor	0.5H.P. 1440 RPM	0.5H.P. 1440 RPM	1.0H.P. 1440 RPM	1.5 H.P. 1440 RPM	2 H.P. 1000 RPM	2 H.P. 1000 RPM	2HP. 1000 RPM	2H.P 1000 RPM
Coolant Pump	0, 15 HP, 440 Volts	0.15 HP., 440 Vote	0.15 HP., 440 Volts	0.15 HP., 440 Volts	0.15 HP., 440 Volts	0.15 HP, 440 Volts	0.15 H.P, 440 Volts	0.15 HP., 440 Volts
Blade Speed	25 / 30 / 35	25 / 30 / 35	20 / 35	20 / 35	20 / 35	20 / 35	15 / 35	15 / 35
Meter / minute			55 / 75	55 / 75	55 / 75	55 / 75	55 / 75	55 / 75

Dimensions:

Bandsaw Blade - mm	2540 X 20 X 0.9	2540 X 20 X 0.9	3000 X 27 X 09	3505 X 27 X 0.9	3760 X 27 X 0.9	4100 X 34 X 1.1	4420 X 34 X 1.1	4570 X 41 X 1.3
Floor Space LxWxH mm	1500 X 570 X 870	1500 X 570 X 870	1630 X 580 X 895	2300 X 822 X 1000	2400 X 830 X 1050	2650 X 830 X 1200	2700 X 830 X 1200	2750 X 830 X 1200
Net Weight kg	272	272	322	550	600	700	800	950

We offer Centreless Grinding Machine Model Lmt-75C complete with all std. accessories & electricals.

MODEL LX-100C 

Standard Specifications:

• Capacity: 2mm to 100mm
• Max. length of parts for infeed grinding: 100mm
• Dimension of grinding wheel: 400 x 100 x 125mm
• Dimension of regulating wheel: 230 x 100 x 76.2mm
• Grinding wheel speed: 0 to 1440 rpm variable with ac drive
• Regulating wheel speed: 20 /  40 / 75 rpm
• Grinding wheel motor: 7.5 hp
• Control wheel motor:  1 hp
• Hydraulic motor:      1 hp
• Coolant motor:        0.15 hp
• Swivelling of regulating wheel: 3 “ degree
• Grinding & control wheel spindle: white metal bush bearing
• Ttaper roller bearing –32212
•  Wheel dressing: hydraulic

 
Standard Accessories:

• Complete electricals & hydraulics
• AC frequency drive for linear speed control motor pulleys & v-belt
• Dimaond dresser
• Hyd. dressing attachment water tank
• Grinding wheel
• Regulating wheel
• Standard work rest
  

Extra Accessories:

• Extra work rest as per your job
• Base for work plate
• Additional wheel flange
• Grinding wheel balancing arbour
• Grinding wheel balancing stand
• Bar feeding attachment
• Form grinding attachment

 
Trade terms:

• Above rate is for at works
• Taxes: @ 2% against form “ c”  else 5% without form “c”
• Wooden packing: @ 3% extra
• Delivery: 6 to 8 weeks after getting confirmed order
• Payment: 30% advance & balance against delivery
• Validity of quotation: 60 days only

 
 

Pivot Type high speed heavy duty horizontal metal cutting bandsaw machine is a new product offered by us.

LAXMEN METAL SAWING CO. is enganged in manufacturing of manual / semiautomatic/ fully automatic pivot / double column type hydraulic horizontal metal cutting bandsaw machines in India.
 
The “Laxmen” group  have more than 6000 installation in all over India & abroad. The “Laxmen” group  have got expertise in manufacturing technology of Bandsaw machine.
We have Proven German design of Bandsaw machine so we treat ourselves as one of the BEST MANUFACTURER OF METAL CUTTING BANDSAW MACHINE in the world.
 
We are continuously  improvising our product as per the market demand. So day by day our products are getting more popular in the market. We believe in TOTAL CUSTMOR SATISFACTION. We always intend to give best product  at lowest market price .
 
Presently we have launched a new version in “PIVOT TYPE BANDSAW MACHINE”.
 
Generally in Pivot type Bandsaw machine, The lifting of cutting arm is manual. So after cutting the Job , one has to lift the cutting arm upto the job size .The Cutting Feed in manual Pivot type Bandsaw machine is “ Gravity – self weight”  only. So the cutting feed is not uniform throout the Job size. It varies as per the Gravity – Weight of the Arm.
 
Now, In new development we have put a Electro-mechanical device which eliminates the Drawback of “Gravity feeding“ and  “manual Arm lifting”. In this arrangement The cutting feed can adjusted precisely as per the Grade of material. The Cutting feed is controlled by infinitely variable speed drive. It can be increased OR decreased as in the case of hydraulic feeding .
 
Moresoever after cutting of the Job, the machine arm gets lifted automatically upto the job size OR setting of upper limit switch.
 
This is very low cost solution for those custmor who wants the advantages of “ Hydraulic Double column Bandsaw machines“ but cannot afford the price of this high value machine.
 
Auto Lifting &  Cutting Feed Adjustment  Device: This arrangement makes the pivot type Bandsaw machine more Precise & vibration free . So the life of Bandsaw blade is increased and the cutting accuracy will be much much better than conventional pivot type Bandsaw machine.
 
This attachment consists of -

   1. Drive motor with reduction gear box
   2. Lead screw & nut
   3. Electric panel board with variable frequency drive
 
We have supplied bandsaw machines with this type of device and it is found successful.