Enertech
“Fast – Clean” has introduced the first multiple frequency ultrasonic cleaner that can be used for demanding applications such as high tech parts cleaning, AND rigorous industrial cleaning applications. This revolutionary ultrasonic cleaner, known as MULTIFIRE, includes simultaneously operating transducers and generators of MULTIPLE frequencies to provide the ultrasonic cleaning characteristics of all frequencies, a drastic improvement over any single-frequency system.
Every frequency of ultrasonic provides a cleaning action with certain characteristics. Low frequency ultrasonic cleaners produce cleaning action which has more impact & power, but less evenly distributed in the cleaning tank, leading to "hot spots" of activity which will lead to inconsistent & uneven cleaning results, and even can damage to highly polished aluminum parts. High frequencies create cleaning action which is more evenly distributed, and has improved penetration capabilities to clean inside of blind holes and crevices and other detailed part areas, but has lesser impact & power. By combining high frequencies and low frequencies together, the characteristics of both frequencies are included. Low frequency power combined with high frequency penetration and even distribution of energy. The MULTIFIRE ultrasonic cleaner is the most technologically advanced ultrasonic cleaning system available, and can only be purchased at Fast Clean Ultrasonic in INDIA.
Most ultrasonic cleaning applications require the power, and penetration, which only MULTIFIRE has to offer. Your cleaning application may have contaminants which require raw power, such as burned carbons, buffing compounds, rust, or others which are the domain of low frequency ultrasonic cleaners. Your parts may also have detailed areas, blind holes, threaded areas, and similar design patterns / profiles which require high frequency ultrasonic. The MULTIFIRE Multiple Frequency Ultrasonic system includes the power, and penetration, required to address these applications. Both frequencies operate SIMULTANEOUSLY & not intermittently. And, transducers are NEVER forced to operate outside of their natural resonance frequencies, resulting in the most efficient multi-frequency system currently available.
For high-technology applications, your concern is more than likely with particles of varying sizes, while simultaneously preventing damage to critical components. Since ultrasonic cleaners of differing frequencies have tendencies to remove particles of differing sizes, MULTIFIRE ensures that the range of particles being addressed by the system is maximized.
Perhaps the best part about a MULTIFIRE system is that YOU CAN EASILY PROVE ITS MANY ADVANTAGES OVER COMPETITIVE SYSTEMS WITH SIMPLE ALUMINUM FOIL. By submerging small strips of aluminum foil into an ultrasonic bath and holding the foil VERY still, holes will be created in the foil at ultrasonic hot spot locations, clearly indicating how evenly distributed the ultrasonic power, and powerful the scrubbing action at that particular tank location. By visually examining the foil, one can easily see the shortcomings of single frequency ultrasonic systems. MULTIFIRE will produce a more evenly distributed scrubbing pattern with NO DEAD SPOTS. All part surfaces will be cleaned ultrasonically, with no surface left un-touched, yielding more consistent and faster parts cleaning results.
Conclusion : “MULTIFIRE” Multiple frequency Ultrasonic Systems are the BEST and Only answer to meet your demanding needs to truly match International Standards.
Specification and design are subject to change without prior notice due to continuous upgradation process.
© Life Care Equipments Private Limited. All Rights Reserved (Terms of Use)