Inter Ferential Therapy (IFT)

UNISTIM (Computerised Electrotherapy unit)
The UNISTIM is an advanced electrotherapy equipment in the field of electrotherapy. More than 12 different current types can be selected, providing facilities for all modern electrotherapy and electrodiagnostic applications. In the development of the unit simplicity of operation and functionality were the principal consideration. All the available types of current and therapy are clearly displayed on a large LCD screen. The corresponding parameters are easily set with five soft touch keys. Pre-programmed memory with treatment applications offers protocols for more than 64 frequently occuring indications. And users can store their settings in user memory locations and easily recall their programmes for their patients.
 
UNISTIM offers a choice of 12 current types
Four-pole interferential therapy with or without vector scan
Bipolar interferential therapy
TENS continuous current
TENS Burst current
Rectangular pulsed current A Triangular pulsed current
Ultra Reiz current
Galvanic direct current
DF - Diphase Fixe
MF - Monophase Fixe
CP - Module en courtes Periodes
LP - Module en Longues Periodes
 
FEATURES :
Both medium and Low frequency currents
64 Pre-programmes condition wise with protocols
Cable and Electrode checking mode
User settable memory
Light weight and compact design
Easy to operate
Future upgrade without change in hardware
DSP Based circuitry, outputs are in 100% accuracy
Large graphic LCD Display
International standards and specifications
Advanced patient safety system
PC Interface facility (in future)
 
SPECIFICATIONS :
Medium Frequency Alternating Current
 
Carrier Frequency :    2000 Hz / 4000 Hz
BaseFSFSFSFSFS :    0 - 150 Hz (1 Hz Step)
Sweep Modulation Programs :    1/1S, 1/5/1/5S, 6/6S
Therapy modes :    Four pole Interferential
Four pole Vector 90
Four pole Vector 45
Two pole pre-modulated
Output Current :    0-100 mA
 
Muscle Stimulator Currents
Plain Galvanic :    Continuous DC Current Diagnostic - 0.01, 0.03, 0.1, 0.3, 1,3
10, 30, 100, 300 mSec.
Int. Galvanic :    Therapeutic 30 - 300 mSec. (in 10mSec. variation) Off Time - 500, 1000, 2000 mSec.
Surge Faradic :    50 Hz / 0.7 mSec.
ON Time :    1 - 10 sec. (in 1 Sec. variation)
OFF Time :    1 - 6 sec. (in 1 Sec. variation)
 
TENS
Frequency :    2 - 250 Hz (in 1 Hz variation)
Pulse Width :    20 - 250 µSec (in 1 µSec variation)
Burst Frequency :    1 - 4 Hz
Ultra Reiz (UNISTIM)
ON Time :    2 mSec.
OFF Time :    5 mSec.
 
Low Frequency Classic Currents
Diadynamic currents :    DF, MF, CP, LP
Timer :    0-60 minutes
Display :    128 x 64 Graphic back lit LCD display
Technical Specifications
Mains Supply :    220 v / 50 Hz AC
Safety Class :    I type BF, according to IEC 601-1
Dimensions :    W x B x H 30x25x10.5 cm
Weight :    4 Kg.

Indomed is an advanced electro therapy equipment based on Microcontroller circuit. It has a digital display to indicate the output current intensity and treatment time. It is a user-friendly system with worldwide proven technology.
 
Interferential therapy has developed into one of the most widely used therapy modes. The characteristics of alternating current (No Galvanic effects) and the relatively high carrier frequency (Reduced skin resistance) makes interferential therapy especially suitable for the treatment of deeper lying tissues.
 
SPECIFICATIONS INDOMED :
Therapy Forms :    4 Pole, 4 Pole Vector, 2 Pole ( 2 channel )
Carrier Frequency :    4 and 2 KHz.
Base AMF :    0 - 100 Hz, Continously adjustable
Sweep Programmes :    3 Positions, Rectangular 1/Is, Trapezoidel 1/5/1/5 s, Linear 6/6 s.
Intensity control :    0 - 100 mA continously adjustable
Intensity Balance :    To equalize the 2 Channels.
Intensity Display :    3 Digit Digital Display indicates the peak value of the real patient current ( Red channel )
Timer :    0 - 99 Minutes Presettable Timer. At the end of treatment time the intensity is decreased to zero and sound an   audio alarm.
 
FEATURES :
Three modes of stimulations
Four pole interferential therapy mode
Four pole interferential vector therapy mode
Two pole pre - modulated therapy mode.
Choice of two carrier frequencies 4 & 2 KHz
Electronic intensity control with 100% patient safety
User-friendly system with worldwide proven Technology.

The Digimed is an advanced Interferential Therapy Equipment in the Field of Electrotherapy. In the Development of the Unit Simplicity of operation and functionality were the Principal consideration . All the available types of current and Therapy are clearly displayed on a large LCD screen. The corresponding parameters are easily set with Five Soft touch keys. Pre-Programmed memory with treatment applications offers protocols for more than 35 frequently occurring indications. and Users can store their Settings in User memory Locations and easily recall their programme for their patients.

Features
International standards and Specifications
35 Pre-Programme condition wise with Products
Cable and electrodes checking mode
User settable Memory
Light Weight and Compact Design
Easy to operate
Future upgrade without change in hardware
DSP based Circuitry Outputs are in 100 % Accuracy
Large Graphic LCD Display
Universal input Voltage 90V-270V

Specifications
Carrier Frequency 2000 Hz/4000 Hz
Base Frequency 0-150 Hz ( 1 Hz step )
Sweep Frequency 0-150 Hz ( 1 Hz Step )
Sweep Modulation : 1/1 sec, 1/5/1/5 sec. 6/6/ sec
Therapy Modes Four Pole Interferential,Four Pole Vector 90, Four Pole Vector 45, Two Pole Pre-Moulded
Output Current 0-100 mA
Timer 0-60mins

Technical Data
Mains Voltage 90-270V/50 or 60 Hz
Safety Class I, type BF according to IEC601-1
Dimensions Lx Bx H 30x 25x 10.5 cms