Our range of hydro power scissor lift tables are used for lifting of three wheelers to first floor. These are also suitable for loading of two wheelers.
Features :

• Easy to operate
  
• No need of brick ramp
  
• Useful for basements
  

Construction of our range :
Center pins : Made from EN-8 material duly heat treated & grounded having lubrication provisions and grease nipples provided on all points
Gun metal : Gun metal bushes are provided on all loading points-movable parts of the scissor lift-bracket s & on cylinder shaft’s head
Hydraulic cylinder: Made from seam less pipe having glass finish duly machined & honed 2 nos. cylinders provided in a unit
Hydraulic seals, pistons : The hydraulic seal kit along with other fittings are provided as per the sizes required to be fitted
Piston rod : Made from EN-8 tested material duly machined, grounded and hard chrome plated
Type : Stationery type to be fixed at one place inside the pit
Tie rods : To make the alignment correct and provide tie rods of heavy duty pipes
Locks : All the pins are properly locked to prevent its opening while in operation
Paints : All our machines are painted with two coat of red oxide & two coat of golden yellow and as per the customers requirement
Operation : The end user can operate the equipment from the top of the platform having pendent control box in hands or it can also be operated from the bottom where the control panel is fixed
Electrical control panel : Electrical control panel suitable to operate 3 H.P. motor and supplied along with scissor lift
Hydraulic power pack : Hydraulic power pack of 3 hp motor 3 phase are supplied along with scissor lift

Specifications :

Table Size	HT Max. SS	HT Min. SS	HT Max. DS	HT Min. DS
2200 * 1000	1750	350	2600	450
2500 * 1500	1900	400	3400	500
3000 * 1200	2300	500	4200	600
3500 * 1500	2600	500

Our range of hydraulic scissor lift tables are designed to adjust in the available space of the shop floor. These hydraulic scissor lift tables are made from superior grade raw material to provide optimum performance to the end users.

Features :

• Easy to operate
• One man handling

Specifications :
 

Model	ET 10	ET 10A
Capacity in Ton	1 Ton	1 Ton
Table Top Size	500 * 900 mm	600 * 1000 mm
Base Size	520 * 1140 mm	620 * 1240 mm
Closed Height	360 mm	360 mm
Raised Height	1250 mm	1500 mm
Over all Sizes	670 * 1260 mm	770 * 1360 mm

With the help of our expert workforce, we are designing and developing a wide range of heavy duty lifting tables. Available in varied specifications and dimensions, these can also be customized as per the application needs of our customers.

Specifications :
 

Model	Capacity	Table Size	HT Max.	HTMin.
ET-20 SS	2 Ton	1500 * 750 mm	1200 mm	350 mm
ET-30 SS	3 Ton	2000 * 1000 mm	1500 mm	400 mm
ET-50 SS	5 Ton	2000 * 1000 mm	500 mm

Our in depth domain knowledge assist us in manufacturing a wide range of floor jib cranes. These are manufactured using superior grade raw materials, thus ensuring durable performance at client's end.

Specifications :
 

S. No.	Capacity (Ton)	Inner	Middle	Outer
1.	1 Ton	1000 Kg.	800 Kg.	600 Kg.
2.	2 Ton	2000 Kg.	1600 Kg.	1200 Kg.
3.	3 Ton	3000 Kg.	2400 Kg.	1800 Kg.
4.	5 Ton	5000 Kg.	4000 Kg.	3000 Kg.
5.	Hook Height Max.	2100 mm	2250 mm	2600 mm
6.	Hook Height Min.	750 mm	550 mm	350 mm

The hand pallet trucks that we offer are available in varied specifications and dimensions. These are easy to operate and require low maintenance.

Specifications :
 

Capacity	Fork Length Width	Lift Min. Max.	Fork Wheel	Steering Wheel	Weight
1.5 Ton	1150 mm	90 205 mm	85 * 70 mm	200 * 50 mm	130 Kg.
2.5 Ton	1150 mm	90 205 mm	85 * 70 mm	200 * 50 mm	140 Kg.

We offer a wide range of chain pulley blocks, which are incorporated with helical super gear train and are provided with no bush system. The gears of our chain pulley blocks is made from proper gear material that are duly heat treated. Further, we also provide high tensile nuts & bolts, ensuring efficient functioning at client's end.

Features :

• Provided with brakes and proper system
  
• Load chain of Gr.80 and hand chain of Gr.30
  
• Steel forged hooks are used
  

Specifications :
 

Capacity Ton	Standard Lift in Mater	Weight With 3 Meter Lift Kg.	Falls	Chain Dia Used in mm
1	3	17	1	7 - 8
2	3	24	1	8
3	3	32	2	8
5	3	42	3	8 - 9
7.5	3	123	4	12
10 T	3	154	4	12

Our range of pulley blocks also known as ratched lever pulley are made from steel and equipped with gears. These pulley blocks are available in different specifications, which are offered at industry leading prices.

Construction :

• Load chain : The rollers / link load chain is made of high resistance steel finish
  
• Disc brakes : Disc brakes Works with load pressure and the sprocket wheel has a safety device
  
• Arm lever : The short arm lever and the particular gear ratio allows to ease its load with minimum stress and maximum security
  
• Gear train : Gear train is designed in helical cum spur
  
• Hooks : Both hooks are rotating and made of forged steel complete with safety catch
  
• Standard : Machines are manufactured as per the Indian Standard
  

Specifications : 
 

Model	Capacity Ton	Standard Lift in Meter	Weight with 1.5 Meter Lift Kg.	No. of Falls
TR - 8	800   Kg.	1.5	9.00	1
TR - 16	1600 Kg.	1.5	16	1
TR - 32	3000 Kg.	1.5	24	2
TR - 50	5000 Kg.	1.5	32	3

Our range of electric stackers are designed using hard chrome polished finish piston rod and are rust proof. These electric stackers are equipped with compact double action hydraulic pump, thus ensuring optimum performance at client's end.

Specifications :
 

Capacity	Lift (mts.)	Length of Bottom Forks Loading	Length of Loading Fork	Folk Height at Closed Position	Distance Between Forks	Distance Outside Forks	Front Wheel Dia
500 Kgs.	1.6	850 mm	900 mm	100 mm	350	650	80 * 50
500 Kgs.	2.3	850 mm	900 mm	100 mm	350	650	80 * 50
1000 Kgs.	1.6	900 mm	1000 mm	100 mm	350	650	80 * 50
100 Kgs.	2.3	900 mm	1000 mm	100 mm	350	650	80 * 50

With the help of our expert workforce, we are designing and developing a wide range of pulley & lifting machine. Available in varied specifications and dimensions, these pulley & lifting machines can also be customized as per the application needs of our clients. Moreover, our range is offered at industry leading prices to our clients.

Specifications :
 

Model	T-8	T-16	T-32
Weight (Approx.)	7 Kg.	17 Kg.	26 Kg.
Dimension (Approx.) C.M.	50 * 23 * 10	62 * 30 * 15	72 * 32 14
Capacity (SWL) Lifting	800 Kg.	1.6 Tonnes	3.2 Tonnes
Capacity (SWL) Pulling	1250 Kg.	2.6 Tonnes	5.2 Tonnes
Length of Telescopic Handle	54 / 72 Cm.	66 / 104 Cm.	79 / 118 Cm.
Effort (Approx.)	30 to 45 Kg.	50 Kg.	60 Kg.
Run of Rope per return stroke	60 mm	55 mm	25 / 40 mm
Diameter of rope (Approx.)	8.3 mm	11.3 mm	16.3 mm
Breaking Land of rope	4.5 Tonnes	9 Tonnes	16 Tonnes
Length of rope	10 meters	20 meters	10 meters& Request for Full Quote

Drum Carriers With the help of our well developed manufacturing unit, we are producing a wide range of drum carriers. These are easy to operate and resistant to corrosion. Specifications :   Thickness Width Height 410 mm 610 mm 1300 mm 16 Inch 24 Inch 51 Inch Request for Full Quote

Dock Leveler Dock Leveler is Versilite equipment is being used for loading unloading material into the containers with the help of mini Fork Lifter. Request for Full Quote

Hydraulic Car Lifts We offer a wide range of low head hydraulic car lifts, which are manufactured using superior grade raw material. These hydraulic car lifts are available in varied dimensions and specifications, which can also be customized as per the requirement of our clients. Request for Full Quote