We are engaged on offering a comprehensive array of chart recorder that is widely used to record the electrical or mechanical trend input onto any paper surface. These are imported from the certified manufacturers and are offered in the leading industrial price.  These chart recorders may be totally mechanical through clockwork mechanisms or electro-mechanical with the support of an electrical clockwork mechanism for driving the chart or entirely electronic with no mechanical components at all. These are widely appreciated by our clients for their accurate results and efficient functionality.

We are engaged in offering a comprehensive array of paperless recorder in the model: VR- 18 which is said to be the finest one in the market. These are used in various industrial applications and mainly catered in the rubber, plastic, food and automotive industry. It is the World's First paperless recorder in its size end class with the highest resolution (true VGA, 640 x 840 pixels), infrared movement detector - so that the monitor switches off and on by itself upon sensing human movement around it.  The unit has the ability to accommodate a maximum of 18 channels in any combination as per the available analog input card, digital input cord & digital output Card., plug & play.
 
Features available:
 

• I/O card
• Highly flexibility
• User friendly and has a very short depth of only 157 mm.

The unit has an average memory capacity of 8 MB onboard memory or 16 MB using a CF Card, which is supplied as free of cost along with the instrument. Additional memory is available in either 64 or] 28 MB cards, which can be procured at additional cost.
 
Technical Specifications:

Display	6.4- TFT LCD, 640 x 480 Pixels
Type of Inputs accepted	Thermocouples J, K, T, E, B, R, S, N & L, Pt-100 (DIN) & PT-1D0 (JIS) mV : -8 mV To +70 mV, mA: -3 mA to 27 mA VDC : 0-1, 0-5, l-5 or 0-10V
Memory	Storage memory on Board: 8 MB CF Card : 16 MB Standard, Additional Memory available in options of 64 and 128 MB
Communication	Ethernet Available as a Standard Option
Communication Module (Optional)	Interface : RS-232 for single Unit RS-485 for upto 247 Units Protocol: RTU Modbus Protocol
Analog Input Card Specifications	18 bit resolution, sampling rate of 200 mS, Available in either single channel, dual channel or triple channel input.
Digital Input Card	6 Channels per Card.
Digital Output Card	6 Channels per Card
Infrared Detector for Protection of Monitor's life	Detects moving human body within 2 meters
Power	Operates on a wide range of 90-264 VAC
Operating Environment	Upto 500C to, 80% RH.
Dimensions	166 x 144 x 174 mm (WxHxD)
Approvals	CE Approved, UL Classified Protection of IP-30 on front panel Emission tested.

We are one of the leading importers of handheld digital thermometer that is offered in the model number EQ-610B. It is a type of digital thermometer that helps in offering fast response and better accuracy in contact type of temperature measurement. It is protected by an uneven holster large LCD display with back light.
 
Some of the salient features include:

• Low battery indication
• Data Hold function
• 0.1 & 1.0 ⁰C switch able resolution
• Rugged holster Protection.
• Selectable0C /0F/ K Temperature Display

 
Technical Specifications:

Display	3 digit LCD
Measurement Range	-50 to1300C
Accuracy	2C : - 50 lo 0 0C0.5% rdg + 1C : 0 to 1300 0C
Sampling Rate	Sampling Rate
Operating Temperature	0 to 500C
Input Protection	60VDCor24Vrms
Power Supply	9V Battery
Dimension	165 x 76 x 43mm
Weight	400gm

Accessories available: 9V battery, Holster with stand and Bead Type Temperature probe.

We offer a comprehensive array of precision bench top pH mV temp meter that is widely used in various industrial applications. These are offered in Model: PL-600 that is technically designed in order to meet the industrial requirements. These are highly reliable in acquiring accurate results and are widely appreciated for its easy operation and longer functional life.       
 
Salient Features:
 

• Microprocessor based designed and rugged housing with splash proof keyboard.
• Microprocessor based designed and rugged housing with splash proof keyboard.
• The large backlight LCD displays pH and Temperature,
• Automatic or manual temperature compensation and degree ⁰C/⁰F switch able
• All reading feature stamp meeting GLP guidelines
• Stores up to 64 reading which you can download data to your computer via RS232 output
  

 
Model: PL-600
 
Specification:

	PH	mV	Temp
Range	0 00- 14.00	2000	-5- 105 "C
Accuracy	0.01 + 1 digrt	0.1% mV / F.S.	0 2T+    1 digit
Resolution	0.01	1	0.10C
Compensation	ATC0- 1000C
Communication	RS232
Storage Data	64 reading
Power	DC 9V by AC adaptor
Dimensions	200 x 160 x 65 mm
Weight	600 g (complete Kit)

Accessories for Complete Kit
 

• pH Electrode (glass)
• Temperature Probe (Pt 1000)
• BufferSolutionpH4&7
• AC / DC adaptor
• Electrode Holder
• RS 232 software & connection cable
• Instruction Manual

We are one of the leading importers of a qualitative array of jumbo temperature / Relative Humidity (RH) indicator that is widely used in the findings of relative humidity and temperature. It is offered in the model number EQ-TH 2000 and is widely appreciated for its reliability and accurate functioning under industrial conditions.
 
Some of the attractive features include:
 

• 2" Large size display
• Bright LED Display
• Long Term Repeatability and Accurate
• Wall Mount / Hanging Type
• Retransmission output for Data Loggers / Acquisition Systems
• On-field Calibration Facility

 
Construction:
 

• The indicator in combination with Precise Temperature / Humidity Transmitter displays the temperature and Relative Humidity values continuously.
• It has the jumbo LED display which can be viewed from for places and with better accuracy.
• It has a retransmission output of 4—20mA corresponding to Temperature &. Humidity values which can be used for further Data Acquisition System , data loggers, for alarm system

 
 
Technical Specifications:

Display	2" Red LED x 2 Display
Accuracy	0.50%
Resolution	0.10C; 0.1% RH
Input	4—20rnA from Temp / RH Transmitter
Calibration	Zero & t span using Trimmers
Retransmission Output	4 - 20mA
Enclosure	Powder Coaled metal case
Operating Voltage	230VAC
Dimension	445(L) x 130(D) x 115(H)

Technical Details of Temperature and Humidity Sensor (Optional)

Measuring Range	0 to 100% RH , 0 lo 100 C
Accuracy	2% RH, 0.3 C
Operating Temperature	up to 80 C
Temp Compensation	0.008% RH / C
Respons

We offer a comprehensive array of PH electrode that is offered in the model no.  PW40. These are widely used in various industrial applications for a reliable and highly efficient result. These are imported from the established manufacturers and available in the leading industrial price.  

Some features of our range include:

• Fast response and high   accuracy, ideal   for field   or lab application
• Connector available with BNC,    Spade Lug or DIN 7 pins and completes with 1 m cable
• Protective bottle with 4M KCI solution keep electrode wetting to extend electrode life

 
Technical Specifications:

	PW40	PD 4520	ID 4520F [Flat tip]
Range	0- 14 pH	0- 14 pH	0- 14 pH
Temperature	0 - 800C	0- 800C	0 - 800C
Type Ref.	Ag / AgCI	Ag / AgCI	Ag / AgCI
Junction	Ceramic	Teflon	Teflon
Refillable	No	No	No
Body	PC	PPS	PPS
Connector	BNC	Spade Lug	Spade Lug
Dimensions	165 x 12 mm	176 x 16 mm	176 x 16 mm
Cable	1 m	5 m	5 m

We offer a wide array of pressure / vacuum transmitter in the Model: HD2004T. These are imported from reliable manufacturers having a current output of (4—20mA). HD 20V4T is a type of microprocessor pressure transmitters with a voltage output (0/ 5Vor 0 / 10V).
 
The sensitive element is consisted of a bridge of piezoresistive resistances laid on a ceramic diaphragm. When the pressure is changed, the bending of the diaphragm causes a linear and proportional change of the bridge resistances. The stainless steel case (30 mm diameter) includes both the sensor and the electronics: unscrewing the base equipped with fast-on connectors, the user accesses the keys to adjust the upper and the full scale. A LED helps the user during the calibration procedure.
 
Technical Specifications:

Output Signal	Current	4 20mA(HD2004T )
	Voltage	0    5V (HD20V4T   1) 0   10V(HD20V4T...3)
Pressure range		1,2.5,4,6,10,16,25,40, 60,100.160, 250,400 and 600 absolute bars 1,2.5,4,6,10,16.25,40,60 relative bars
Over a pressure unit Upto250 bars		Twice the rated value
400 nominal bars		750 bars
600 nominal bars		750 bars
Sensor		Piezorcsistive
Material in contact with the measuring fluid		Alumina
Fluid in contact with the diaphragm		Gas or liquids
Operating temperature		-30...+ 800C

We offer a comprehensive array of temperature and humidity transmitter in the model no. DO- 9861T. These are widely used in the rubber, plastic, food and automotive industry. It helps in converting the humidity and temperature measured by two sensors into a 4/20 mA signal. An LCD indicator allows the value of the process signal and the various parameters to be displayed.
 
The   exact   design    and    preference   of components make the instruments precise and reliable for a long functioning life. The instruments have two sensors:
 

• A capacitive sensor for measuring relative humidity
• A Platinum resistive sensor [Ptl00, 100 at100⁰C] for measuring temperature.

 
The transmitters measure the Relative Humidity (%RH), the sensor Temperature (TC), and Calculate the Wet Bulb Temperature (WT], the Dew Point Temperature (DP), the Absolute Humidity (gr/m3) and the Mixing Ratio (gr/kg - grams of Water per kg of dry air). The Temperatures are expressed in Degrees Celsius.
 
Technical Characteristics:

	Capacity	300 pF
	Transducer energizing	10 kHz
Relative Humidity	Cable length	<. 10 m multiple screen (about 2 nF) additional error about 0.003 pF/pF
	Accuracy	Instrument:   0 1% of reading 1 digit 0.01% Sensor   2 5% (5...90%) + 3/2.5% (90...98%)
	Working range of sensor	Relative humidity   5....98% @ 230C Dew point temperature (DPC) – 60....+100 DPC (-20 DPC @ 23 C) Temperature range -40.... +1500C
During use, check that the sensor is compatible with the atmosphere used
	2/4 wire Pt 100	-50.. +199.90C
Temperature	Transducer energizing	0.5 mA dc
	Cable length	< 10m not screened < 50 m screened (about 5 nF)
	Accuracy	0.20C 0.1 % of reading  0 01 C/0C

We offer a wide array of scanner data logger that is fully operated with the support of a microcontroller. It is offered in the model number TS 4100 which are highly efficient and reliable to use in various industrial processes. 

Features:
 

• Latest Microcontroller Based
• Accurate
• Reliable
• Easy To Use
• Compact
• Power Down Memory

Applications:

• Plastics
• Rubbers
• Chemicals
• Textiles
• Furnaces
• Heat Treatment
• Pharmaceuticals
• R & D Laboratories
• Temp. / Humidity Control

 
VR 18
 
Rear Terminals
 

• Standard Eihernel and optional

RS-232/422/485                      
 

• Power Supply

6 SLOTs for Plug & play I/O cards, maximum 18 analog input or mixed with analog & digital I/O cards
 
Input & Output Cards
 

• Digital Input Card
• Digital output (6 alarms) Card
• Analog input Card

 
Bar Graph mode
 

• View max 6 real time data in bar graphs.
• Scale individually by user in "configuration'
• Display data value and tag name in different colon: together with each bar graph
• Mark "Hi/Lo" alarm limits
• Display current "Time/Date" information.
• Remind the user of the "Alarm" or "Memory Full".

 
 
Historical Mode
 

• Display max. 6 Sets of historical data simultaneously
• View desired data section by 1"&"" function keys.
• Access precise data value at a point selected by moving the "ruler"
• "Zoom" to expand/contract the display time span
• View historical data trends and their respective data values.
• Recognize trends easily by different colours and individual tag names.

 
Numerical Mode

• View max 6 real time data numbers
• Display data value and tag name in different color
• Mark "Hi/Lo" alarm limits.
• Display current "Time/Date" information.
• Remind the user of the "Alarm" or "Memory Full".

 
Configuration Mode
 

• Configure pen (input/output, pen name, event, job)
• Configure page (color, pen, decimal, pen width)
• Configure timer.
• Configure instrument (storage media, display, communication, time/date)

 

We offer a comprehensive array of sensor thermocouple in the mode number RTDS(PT100) that is imported from the reliable manufacturers. These are offered in the leading industrial price and used in the following industrial segments:
 

• Plastics
• Rubbers
• Chemicals
• Textiles
• Furnaces
• Heat Treatment
• Pharmaceuticals
• R & D Laboratories
• Temp. / Humidity Control

We offer a wide array of ultrasonic wall thickness gauge in two models such as CR -06 and Tl- 25M with the measuring range of the following:
 

• 0.025- 6.000 inches
• 0.60- 150.0 mm

 
Working Procedures:
 

• The new Instrument Tl-25M Wall Thickness Gauge correctly measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics — from only one side

• The TI-25M can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area.

• The minimum thickness reading recorded during the "scan" will be displayed.

• The TI-25M probe is waterproof and can be submerged in water.

• The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

 
Features:
 

• Resolution of 0.001 inch (0.01 mm)
• Large, backlit LCD display retains last reading
• Simple operator controls virtually eliminate training
• Special-purpose probes are offered for a variety of applications
• Switch-selected units for inches or mm
• For underwater surveying, probe cable lengths up to 50 feet are optionally available CE certified

Model: CR06
 
Features:

• 6 - channel dotting
• Short depth in 150 mm
• Weights 1.5kg only
• Dust-proof IP-65 Water-resistance
• Standard RS232 Communication Interface
• Universal Input an dange
• UL, CSA, CE approved

 
Specifications:
 
Input
 

• Nos. of Input : 6
• Input sampling : 10s/6ch, man
• Type of Input: Direct voltage    ?10mV, 0-20mV, 0-50mV. ?1V. 1-5V
• Direct Current   4-20mA
• Thermocouple. K T, J. E, B, S. R, G. C. N. PR40-20. PLII. L, Au-Fe RTD    Pt 100. Pt 50, JPt 100
• Accuracy:  0.2% 1 digit max for Digital indicator/printing
• Isolation resistance: Each terminals/ground: 500VDC, 20MW min.
• Dielectric strength: Power input terminal/ground: 1.5kVAC, 1 minute Input terminal/ground. 0.5kVAC. 1 minute
• 
  

Alarm

• Nos. of relay outputs : 6 outs (Form a contacts; Built-in option)
• Capacity : 30VDC 3A Max  Loaded

 
Communications

• Interface : RS-232C (Standard), RS-485 (Modbus RTU : Option)

 
Power Supply

• Rated power voltage: 100-240VAC (50/60Hz)
• Power consumption: 25VA max

 
Structure

• Mounting/housing: Panel mounting/Front panel    Dust-proof,
• Water-proof (IP-65)
• Dimension: 144(W) x 144(H) x150(D) mm
• Weight: 1.5kg max.

 
Operation Condition
 

• Allow

We are one of the leading supplier of a comprehensive array of process controllers that is widely used in the rubber, plastic, food and automotive industry. We offer these process controllers in the model number ESM-4430 & 9930 that is widely appreciated for its performance and high output. These process controllers can be easily adapted to all applications and automation system for controlling of heat or any process parameters.
  
Features:
 

• Control output - Relay & SSR
• 4 digits process and 4 digits set display
• Universal process input (TC, RTD, V, mA)
• Dual or multi-point calibration for V and mA inputs
• Programmable ON/OFF, P, PI, PD and PID control forms
• Auto Tune and Self Tune selection
• Manual/Automatic mode selection
• Heating, cooling and alarm function selectable for control outputs.
• Auxiliary Power supply   12VDC 50mA

 
Technical Specifications:
 
PROCESS INPUT
 

• Universal Input: TC, RTD. DC Voltage/Current
• Thermocouple (TC): L.J,K,R.S,T,B,E,N,C
• Thermo resistance (RTD}: PT 100 (IEC751)
• DC Inputs: mV, V, mA

 
 Accuracy:
 

• Thermocouple, Thermo resistances, voltage and current: ?0,25%FS ?1 digit
• Cold Junction Compensation: Automatically. +0.10C/10C
• Line Compensation: Maximum 10 Ohm
• Sensor Break Protection: In the working scale
• Sampling Cycle: 3 samples per second
• Input Filter: Selectable 0.0 lo 900.0 second.

 
CONTROL
 

• Control form:
• Selectable ON/OFF, P, PI, PD or PID

 
 
OUTPUT
 

• Relay Output: Two pieces 5A@250Vac (Selectable Control or Alarm output)
• SSR Drive Output: 18VDC/40mA

 
DISPLAY
 
Process Display:
 

• ESM-4430           10 mm Red 4 digits LED display
• ESM-9930           14 mm Red 4 digits LED display

 
Set Value Display:
 

• ESM-4430           8 mm Green 4 digits LED display
• ESM-9930           8 mm Green 4 digits LED display

 
LED indicators:
 

• AT(Auto tune
• M( Manual mode)
• A(Automatic mode)
• PSET1/ASET1/ASET2 (Control or alarm indicators)
• LEDs. PO. A01 ,AO2 {Control or alarm status indicator) LEDs.

 
SUPPLY
 
Supply Voltage:
 

• 100 to 240 Vac Universal 5upply Voltage -%15/+%10 AC 6VA
• 24Vac/Vdc Supply Voltage (Optional) -%15/+%10 DC 6W

 Power Consumption: Maximum 6VA

• CONDITIONS and PHYSICAL SPECIFICATIONS