Belt Sander

Dimension: 2440 x 1220 mm (8'0" x 4'0")

Heavy duty, 2440 x 1220 mm (8'.0" x 4'.0") Cast Iron Body, Dust Collection Unit, Iron Sanding Table and One 5 HP 1440 RPM, 440V, A.C. Motor with two nos. sanding belt. Sander machine for sanding of plywood, block board & doors, fitted with A.C. Motor, Starter, Main switch complete.

Veneer grinding speed 40m/mm
thickness of veneer grinding 8. 4mm angle of veneer grinding 5. 15 speed of emery cloth 2350m/min power (2. 2×3+3) kw  overall dimensions 3000×1180×1700(mm) weight 1500kg

Main Technical specifications: Work width - 40-1300mm Work thickness - 2.5-160mm Work length - 370mm Speed of abrasive belt on 1st unit - 19.5m/s Speed of abrasive belt on 2nd unit - 14m/s Speed of conveyor belt - 6-30m/min Size of conveyor belt - 1300×3600mm Size of abrasive belt - 1330×2200mm Total motor power - 35.94KW Motor of abrasive belt on 1st unit - 22KW Motor of abrasive belt on 2nd unit - 11KW Motor of conveyor belt - 2.2KW Conveyor table motor - 0.37KW Brush motor - 0.37KW Working pressure - 0.4-0.8Mpa Consumption of compressed air - 0.5m3/min Average speed of sucked air - 25-30m/s Overall dimensions - 2130×1950×2150mm Weight - About 3000Kg Features: 1) 1st Roller (Contact Roller) is rubberised with 55 shore;
2) Automatic Up - Down system for Sanding Pad is provided; 3) Oscillation of Sanding Belt is controlled by Pneumatic Limit Switches ; 4) Variable Frequency Drive (VFD) is provided for speed control of Conveyor Belt; 5) Scotch Brush with Motor is provided at exit end of the machine; 6) Braking of 1st and 2nd Roller Motor is designed with double disk braking system; 7) For cleaning of Sanding Belt, sliding nozzles for both Sanding Belts, are provided; 8) During Emergency trip, the Conveyor Bed will move down.