We integrate developed technologies to produce clear bottle suitable for chemical industry. To meet various demands, we develop certain system for recycling such as washing, rinsing, drying, pre washing, sorting crushing, label sorting and contamination removal. Some of the machines used for PET bottles washing line are Recycling Extruder, Recycling Plastic Extruder, Recycling Granulator, Recycling rinser, Recycling washer, Recycling small crusher, Hot air dryer, etc. The whole recycling line adopts German technology. To improve the quality of final product we can change technological process according to the requirement of different material. Pet bottle washing line is basically used for washing & cleaning pet bottles and is also used to crush plastic pet bottles. Proper washing of pet bottles removes the dirt and chemicals from water.

Lutterberg GmbH is engaged in the manufacture of various types of recycling line such as Recycling Extruders, Recycling Plastic Extruders, Recycling Granulator, Recycling Rinser, Recycling Washer, Recycling Small Crusher, Plastic Recycling Line and Hot Air Dryer. High quality recycling equipments are supplied to our customers at customized rates. Recycling granulator is used for processing recycling clean, woven bags, plastic film to make them into plastic grains, so that it is used as a raw material again. Hot air dryer is basically used for removing surface moisture and condensation from non-hygroscopic materials. Some of the features of hot air dryer are:

• Energy efficient.

• Uniform air distribution.

• Insulated construction for saving energy.

It is basically used to clean, crush, recycle the waste plastics such as PP, PE, etc. PP, PE can easily clean, wash waste plastic products from beginning to finished products. Waste and dirty agricultural films and waste packing material or hard plastics can be treated step by step by this facility. Some of the features are:

• High Automation level
• High recycling benefit
• Ideal cleaning effect

Lutterberg is engaged in the export of PE, PP film cleaning lines. Some of the technical parameters are given below:

Swp800-Crusher
Motor power	30Kw
Material of knife	99cr
Screen diameter	80mm
Diameter of water jet pipe	1inch
Size of feeding port	1000*800mm
Quantity of fixed blades	4pcs
Quantity of rotary blades	8pcs
Film Floating Washer
Washing roller	5pcs
width	1250mm
Working length	6000mm
Stirring motor power	2.2kw frequency conversion
Dirt draining motor	1.5kw
Thickness of shoot	3mm
Thickness of shoot	3mm
Screw Conveyor
Motor power	2.2kw
Screw diameter	300mm
Effective length	400mm
Rotating speed	500rpm
Diameter of water jet pipe	1inch

We are engaged in the manufacture of PE, PP Film Cleaning lines (1000 Kg/h. Some of the technical parameters are given below:

GS 1800 Crusher
Motor power	2.2kw
Screw diameter	300mm
Effective length	4000mm
Rotating speed	500rpm
Diameter of water jet pipe	1inch
Film Floating Washer
Washing roller	6pcs
Stirring motor power	2.2kw frequency conversion
Dirt cleaning motor	1.5kw
material	Stainless steel
Effective length	7000mm
Double screw conveyor
Motor power	2.2kw
Screw diameter	250mm
Effective length	3500mm

We are engaged in the manufacture of 7 full band dryer which has performance up to 1500 kg / h, depending on the product and moisture 13,50 m long x 900 mm range. Stainless steel and stainless steel drums - Netzband, is well maintained with two rotary mixers, filters, blowers, piping, valves, control cabinet. The band were drier during the dismantling and expertly marked according to the documentation can be mounted again. Upon request, the assembly made by us, as can an overhaul done by us. 7 complete set Belt Dryer, which has been used in a baby food factory in Germany, always understand quality - control Milk powder has been agglomerated in small pearl, capacity up to 1500 kg / h, and dried. 13.5 meters long, belt made from stainless steel 900 mm wide with internal agitator mixer with heating register (heat exchanger) by tribes heated up to 10 bar, approx. Up to 80 kW/h with blower, with filter, with pipes and valves Up to 80 kW / h with blower, with filters, with pipes and valves.

The customer can select a suitable machine among double segment style, three segment style and four segment style according to the production requirement. The special design can assure the good compounding effect and more solid pellet. This kind of production line is suitable for recycling dirty waste and production of repelletizing.

• Gear box: high torque design, low noise, smooth running.
• Special barrel design can assure better compounding effect so as to improve the problem of black point and chromatism.
• Equipped with a force feeder and hydraulic screen changers according to material's special character, it can get a better capacity and save more power.
• Vacuum or common gas exhaust system which fascinates getting rid of damp, waste-gas, impurity, can ensure a more stable extrusion and more solid pellet.

This product line is used in pelleting or repelletizing the PP, PE, PS material after blending with pigment, as well as in turning the power material into pellet.

Model	FSO-65	FSO-80	FSO-100	FSO-120	FSO-150
Screw diameter	65	80	100	120	150
L/D	28-30	28-30	28-30	28-30	28-30
Power of main motor	22-30	30-37	45-55	55-75	75-110
Output	60-110	100-150	120-200	200-350	300-500

The screw and another consisting parts are designed respectively against the features of different material such as PP, PE, PS, ABS, PA, PVC, PC, POM, PET, PMMA, etc. They are suitable for the purpose of material color blending, high torque design enables speed reducer to work stably without noise. Hardness treatment features the screw and high production and barrel with good tear and wear resistance, good compounding effect. Air exhausted system or verified hole can get rid of water and waste gas out of the material. This enables more stable extrusion and more solid pellet, so the super quality of product is guaranteed. Some of the specifications are given below:

Model	FSO-45	FSO-65	FSO-80	FSO-100	FSO-120	FSO-150
Screw diameter	45	65	80	100	120	150
L/D	25-30	25-30	25-30	25-30	25-30	25-30
Power of main motor	7.5	22	302-37	45-55	56-75	110
Output	30-60	60-100	100-150	120-200	200-350	300-500

The double pelleting equipment rank granulating unit is especially for PE, PP, film and solid material, granulating and amp recycling. With double vent, it can accept moist raw material. Some of the technical parameters are given below:

Model	fs/120-90	fs/120-120	fs/150-120	fs/150-150
L/D	12	12	12	12
Power of main motor	22	30	30	37
Power of heating(kw/h)	8	8	8	127
Rotational speed(Rpm)	9-90	18-80	8-80	8-80
output(kg/h)	120-150	150-200	200-250	250-300