• Wire Cutting Cum Stripping Machine
• Cutting & Stripping Machine for Battery Cables
• Wire Cutting & Stripping Machines
• Automatic Cutting Machine for Corrugated Tubes
• Cutting Machine for Heat Shrink Tubes & Plastic Sleeves
• Tube Cutting Machines
• Cable Cutting Machines
• Stripping Machines

Send Online Business Enquiries

M/s 'machine makers r.s.' have developed and manufactured a range of 'Automatic Wire Cutting cum Insulation Stripping machines'. Each one of them is an accurate and efficient machine to cut PVC coated electric wires and also to remove the insulation from both ends. That is to cut and strip wires from a bundle of wire, so as to make them ready for wiring and harnessing.

These machines are user-friendly, tabletop, fully automatic machines. They are incorporating the state of the art technology and are economic alternative to costly imported machines.

These machines can cut and strip single core, multi-strand PVC insulated electric wires upto 6 mm sq. size at a normal production rate of around 2500 wire pieces per hour. Smaller wires can be fed two at a time to get almost double productivity.

These machines incorporate high quality, robust, imported stepper motors. These machines come with PC based controls or with microprocessor controls. Machines are supplied with V blades for cutting and stripping a range of wires.

Machines require single phase 220 V AC stable electric supply and a compressed air supply at 4 bar pressure.

Special machines for other specific customer needs can also be developed by m/s 'machine makers r.s.'


Request for quote

M/s 'machine makers r.s.' have developed and manufactured Cutting and Stripping machine (Model CTSS 303) for Battery Cables. The machine is suitable for cables upto 25 sq mm cross-section. It cuts the cable to accurate length and also removes insulation from both ends.

CTSS 303 uses a specially developed belt feeding system. It takes care of heavy frictional forces required for stripping thick cables.

This machine is tabletop, user-friendly, and automatic. It uses different sets of blades for various sizes of cables. All other setting is completely digital.

It is available with Microprocessor controls as well as PC based Controls. A simple and smart keypad and display is used for setting the length, target quantity, batch qty etc. It comes with in-built production counter, which indicates the number of cuts taken.

The CTSS 303 machines can cut cables of length from 125mm to 9meters. It can strip upto 35mm from either side.
Depending upon the length, the machine can process around 600 wires per hour.
The machine works on single phase electric supply and 5 bar pneumatic supply.

Special machines for other specific customer needs can also be developed by m/s 'machine makers r.s.'


Request for quote

M/s 'machine makers r.s.' have introduced a 'Power Cable Cutting machine' for cutting multi-core Power cables.
This is a specially developed High Speed High Accuracy machine for cutting of power cables as well as single core wires. The machine can be used for processing flat cables, as well.

This power-packed machine ensures high production volumes and low manufacturing costs. With these machines, the cost of cable cutting is around 10 to 15 paisa per 100 cables. Machine being accurate, it saves copper and often the saving in copper cost is much more than the labour saving.

Most importantly, this machine does not require any compressor, and can be operated with single phase electric supply. A combination of motor, clutch and brake delivers a very high cutting force. The machine's noise level is also quite low. This machine is tabletop, user-friendly, and automatic. Any operator can be trained within 5 minutes to operate it.

Machine is available with Microprocessor controls. A simple and smart keypad and display is used for setting the length, target quantity, batch qty and other processing parameters.

It comes with in-built production counter, which indicates the number of cuts taken.

• The standard machine can cut cables of upto 9 mm in O.D.
• The up-graded version of this machine is able to cut copper braided ropes of upto 14 mm diameter.
• The length can be set from 5mm to 9 meters. A special version for upto 25 meters is also avaiable.
• Depending upon the length, the machine can process around 1500-2200 pieces per hour.

Special machines for other specific customer needs can also be developed by m/s 'machine makers r.s.'

Request for quote

M/s 'machine makers r.s.' have developed and manufactured Cutting machine for Corrugated tubes. It is useful for pre-slit as well as un-slit PVC corrugated tubes.

The machine uses a specially developed unique cutting mechanism and belt feeding system. Both these ensure that the hollow tubes do not collapse during feeding or cutting.

This machine is tabletop, user-friendly, and automatic. It is available with Microprocessor controls. A simple and smart keypad and display is used for setting the length, target quantity, batch qty etc. It comes with in-built production counter, which indicates the number of cuts taken.

• The standard machines can cut corrugated tubes from 5mm diameter to 32 mm dia.
• It can cut around 2000 tubes of 100 mm length per hour.
• The machine works on single phase electric supply and 5 bar pneumatic supply.
• The machine cuts tubes within ± 1.5mm accuracy and gives a good cut.

Special machines for other specific customer needs can also be developed by m/s 'machine makers r.s.'

Request for quote

M/s 'machine makers r.s.' have developed and manufactured Cutting machine for Heat shrink tubes as well as other plastic tubes and sleeves. It cuts the sleeves to accurate length and also that too at a very high speed..

The machine uses special guides for different types and sizes of sleeves/tubes. This ensures a good cut. All other setting is completely digital.

This machine is tabletop, user-friendly, and automatic. It is available with Microprocessor controls.

A simple and smart keypad and display is used for setting the length, target quantity, batch qty and other processing parameters. comes with in-built production counter, which indicates the number of cuts taken.It

• The standard machines can cut heat shrink tubes from 3mm dia to 20 mm dia.
• The length can be set from 5mm to 9 meters. Depending upon the length, the machine can process around 4000-12000 pieces per hour.
• The machine works on single phase electric supply and 5 bar pneumatic supply.

Special machines for other specific customer needs can also be developed by m/s 'machine makers r.s.'


Request for quote