Machinery & Tools (Impex)

Exporter of crankshaft regrinder for various industrial uses.

Specifications

Model	CRG -1200	CRG-1500	CRG-1800	CRG-2100	CRG-2250
Size	48"	60"	72"	84"	90"
Max. Distance Between Centers	1200 mm	1500 mm	1800 mm	2100 mm	2250 mm
Max. Distance between Chucks	1100 mm	1400 mm	1700 mm	2000 mm	2150 mm
Max. Weight of Shaft	60 Kgs.	80 Kgs.	100 Kgs	125 Kgs.	150 Kgs.
Swing over Table	400 mm	500 mm	500 mm	650 mm	650 mm
Maximum Stroke	175 mm	225 mm	225 mm	280 mm	280 mm
Height of Centers above Table	212.5 mm	262.5 mm	262.5 mm	337.5 mm	337.5 mm
Work Head Spindle Speeds	27-41-61 RPM	27-41-61 RPM	27-41-61 RPM	27-41-61 RPM	27-41-61 RPM
Grinding Wheel Speed	950 RPM	950 RPM	950 RPM	750 RPM	750 RPM
Table Traverse Rapid / Revolution	10 mm	10 mm	10 mm	10 mm	10 mm
Wheel Head Feed Slow / Revolution	0.250 mm	0.250 mm	0.25 mm	0.250 mm	0.250 mm
Wheel Head Feed Rapid / Revolution	12.50 mm	12.50 mm	12.50 mm	12.50 mm	12.50 mm
Grinding Wheel Dia X Width x Bore	650 x 25 x 200 mm	650 x 25x 200 mm	650 x 25 x 200 mm	800x 25x 200 mm	800 x 25x 200 mm
Tail Stock Quill Travel	75 mm	87.5 mm	87.5 mm	87.5 mm	87.5 mm

Exporter of diesel fuel pump test bench for various industrial uses.

SPECIFICATIONS

Model	DTB-6	DTB-8	DTB-12
Size	6 Cylinder	8 Cylinder	12 Cylinder
Speed Range & Control	Infinite variable in both directions ranging from 100-3000 RPM
Stroke Counter	1200 - 100 - 1200
Tachometer	Electronic Digital 0.9999 RPM with accurance of +_1 RPM
Fuel Supply	Soundless Gear Pump
Fuel Pump Motor	1 HP 3 Phase
Test Injector	6 Injectors set at standard pressure 175 kg/cm2	8 Injectors set at standard pressure 175 kg/cm2	12 Injectors set at standard pressure 175 kg/cm2
	0-26 ml & 0-10 ml	0-75 ml & 0-16 ml	0-75 ml & 0-16 ml
	45 - 50 Litres	45 - 50 Litres	50 - 55 Litres
Main Motor	3 HP (Belt Drive)	3 HP (Belt Drive)	7.5 HP (Belt Drive)
	5 HP (Variator Drive)	5 HP (Variator Drive)	10 HP (Variator Drive)

Exporter of four sided planer for various industrial uses.

SPECIFICATIONS

Working Width	20-150 mm
Working Height	10-100 mm
Number of Spindles	4
Spindle Speed	4000 RPM
Spindle Diameter	31 mm
Tool Cutting Circle - Top Horizontal Spindle	100-150 mm
Tool Cutting Circle - Vertical Spindle	100-150 mm
Feed Speed	6 mtr / min
Feed Roller Diameter	150 mm
Feed Roller Width	50 x 2 mm
Range of Adjustment of Vertical Spindle	25 mm
Power Required for Each Spindle	3 HP (Total = 12 HP)
Power Required for Feed Roller	3 HP

Manufacturer of all geared millin gmachine for various industrial uses.

Specifications

Model	AGM-2	AGM-3	AGM-4
Table Size	1300 x 280 mm	1450 x 300 mm	1600 x 350 mm
Tee Slots	3 x 14 mm	3 x 16 mm	3 x 16 mm
Longitudinal Traverse	660 mm	835 mm	1015 mm
Cross Traverse	220 mm	250 mm	350 mm
Vertical Traverse	400 mm	450 mm	500 mm
Spindle Nose	ISO -40	ISO -40	ISO -40
Spindle Speeds	8 (40-1150)	8 (40-1150)	8 (40-1150)
Arbor Diameter (Universal Models)	1"	1"	1"
Swing of Vertical Head of Either Side (Vertical Models)	90"	90"	90"
Table Feed (Cross & Longitudinal)	8 (15-150)	8 (15-150)	8 (15-150)
Rapid Traverse	1150 mm/ minute	1150 mm/ minute	1150 mm/ minute
Power Required for Coolant Pump	0.1 HP	0.1 HP	0.1 HP
Power Required for Feed	2 HP	3 HP	3 HP
Power Required for Spindle	2 HP	3 HP	5 HP

Manufacturer of head surface grinder for various industrial uses.

SPECIFICATIONS

Table Working	1290 x 290 mm
Grinding Capacity	900 x 280 mm
Travel of Table	1300 mm
Max. Distance of Table to Wheel	600 mm
Table Speed	3 (3', 4.5', 6'/Min)
Segmental Wheel Dia	350 mm
Power Required for Grinding Head	7.5 HP
Power Required for Table Feed	1.5 HP
Power Required for Rapid Feed	1 HP
Power Required for Coolant Pump	0.1 HP

Fully Automatic Form, Fill & Seal Pouch Packing Machine with Advance Gravity Filler system to pack various free flow liquids. Application Mineral water, Milk Butter Milk, Juice, Liquor etc. Specifications Range : 200 ml - 1000 ml Speed : 1500 - 2100 pouches / hour Type of Seal : Center Seal / Three Side Seal Packing Material : Polyethylene Film Model : Mechanical / Pneumatic Head : Single head / Double head Features

• Simple in design
• Low maintenance
• Adjustable pouch length
• Digital timer control for high accuracy

Exporter of pillar type power press for various industrial uses.

SPECIFICATIONS

Model	PPP-20	PPP-30	PPP-50	PPP-75	PPP-100	PPP-150	PPP-200	PPP-300	PPP-400
Capacity	20 T.	30 T.	50 T.	75 T.	100 T.	150 T.	200 T.	300 T.	400 T.
Stroke (in ")	3	3.5	4	4.5	5	6	6	7	7
Bed to am (in ")	10	11	12	14	16	18	22	30	36
Bed Size (L to R) (in ")	14	16	18	20	22	26	30	40	48
Bed Size (F to B) (in ")	16	16	20	22	24	26	30	40	48
Crank Dia (in ")	3.5	4	5	6	7	7.5	8	10	12
Gear Dia (in ")	21	24	28	30	34	40	48	60	70
Fly Wheel Dia (in ")	26	28	32	34	38	45	52	72	84
Hole in Ram (in ")	1.25	1.25	1.5	1.5	1.75	2	2.5	2.5	2.5
Power Required	3 HP	3 HP	5 HP	7.5 HP	10 HP	15 HP	20 HP	35 HP	35 HP

Fully Automatic Form, Fill & Seal Pouch Packing Machine with Advance Filler System to pack various powders, granules & solid items. Application Detergent Powder, Milk Powder, Flour, Tea, Sugar, Spices, Salt, Pulses, Namkeens, Snacks, etc. Specifications Range : 20 gm – 2000 gm Speed : 600 – 3000 pouches / hour Type of Seal : Center Seal Filling system : Volumetric Cup Filler / Auger Filler/ Weigh Filler Packing Material : Polyethylene Film Features

• Tailor made to suit specific requirement
• Easy to operate & maintain
• PLC Control System (optional)

Manufacturer of all geared roll turning lathe for various industrial uses.

Specifications

Model	RTLG-300	RTLG-400	RTLG-450
Length of Bed	6 1/2', 8 1/2', 10 1/2', 12', 14'	8 1/2', 10 1/2', 12', 14', 16', 18', 20'	10 1/2', 12', 14', 16', 18', 20'
Width of Bed	375 mm	460 mm	510 mm
Height of Center	300 mm	400 mm	450 mm
Distance Between Centres	1000mm, 1500mm, 2000mm, 2500mm, 3000mm	1500mm, 2000mm, 2500mm, 3000mm, 3500mm, 4000mm, 4500mm	2000mm, 2500mm, 3000mm, 3500mm, 4000mm, 4500mm
Swing Over Bed	600 mm	800 mm	900 mm
Swing Over Cross Slide	325 mm	530 mm	630 mm
Swing in Gap	865 mm	1200 mm	1300 mm
Spindle Speeds	8	9	9
Optional	16	18	18
Range of Spindle Speeds	30-720 RPM	30-720 RPM	30-720 RPM
Spindle Bore	62 mm	90 mm	105 mm
Metric Threads	1-14 mm	1-14 mm	1-14 mm
Whitworth Threads	2-30 TPI	2-30 TPI	2-30 TPI
Lead Screw Pitch	2 TPI	2 TPI	2 TPI
No. of Feeds	30	30	30
Tailstock Sleeve Taper	MT-4	MT-5	MT-5
Tailstock Spindle Diameter	62 mm	75 mm	80 mm
Power Required	3 HP	5 HP	7.5 HP

Exporter of all geared shaper machine for various industrial uses.

Specifications

Model	AGS-12	AGS-18	AGS-24	AGS-30	AGS-36	AGS-42	AGS-48
Length of Stroke	305 mm	457 mm	660 mm	762 mm	915 mm	1070 mm	1215 mm
Length of Ram	660 mm	914 mm	1325 mm	1400 mm	1640 mm	2135 mm	2285 mm
Ram Bearing (Length x Width)	660 x 178 mm	711 x 245 mm	995 x 280 mm	995 x 280 mm	1145 x 300 mm	1600 x 405 mm	1650 x 430 mm
Max. / Min. Distance of Table from Ram	257 / 41 mm	406 / 89 mm	485 / 109 mm	485 / 109 mm	521 / 140 mm	521 / 140 mm	521 / 40 mm
Working Surface of Table	300 x 228 mm	381 x 279 mm	610 x 330 mm	762 x 370 mm	915 x 387 mm	1050 x 562 mm	1200 x 570 mm
Max. Horizontal Table Travel	419 mm	457 mm	665 mm	670 mm	865 mm	1070 mm	1215 mm
Max. Vertical Table Travel	140 mm	305 mm	432 mm	435 mm	381 mm	457 mm	460 mm
Angular Movement of Table	± 60°	± 60°	± 60°	± 60°	Fix	Fix	Fix
Max. Tool Shank Size	16 x 22 mm	30 x 16 mm	38 x 21 mm	38 x 21 mm	38 x 21 mm	38 x 25 mm	40 x 27 mm
Max. Vertical Travel of Tool Slide	140 mm	152 mm	152 mm	152 mm	228 mm	305 mm	330 mm

Exporter of toilet roll machine for various industrial uses.

SPECIFICATIONS

Maximum Paper Width	28”
Maximum Dia	40"
Maximum Rewinding Area	12”
Standard Core Inner Dia	2”
Perforating Repeat	5” / 6” / 9”
Minimum Slitting Distance	4”
Capacity (8 Hrs Shift)	1500 Rolls (approx)
Power Required	1 HP

Manufacturer of  vertical bandsaw machine for various industrial uses.

SPECIFICATIONS

Model	VB-12	VB-18	VB-24	VB-30	VB-36	VB-39	VB-42
Wheel Diameter	12"	18"	24"	30"	36"	39"	42"
Width of Wheel	1¼"	1½"	2"	2½"	3"	3"	3"
Size of Table	17¼"x17¼"	21½"x23"	27"x28"	35"x36½"	41"x42"	41"x43"	41"x43"
Depth of Cut	8"	12"	17"	22"	25"	27"	31"
Power Required	2 HP	2 HP	5 HP	7.5 HP	10 HP	12.5 HP	15 HP