Machine Tool Traders

This is a lightweight portable mill, which can also be fitted with bangle design roll. It has been redesigned to facilitate working by removing the front support bars in front of rolls and taking the same underneath in the base.

This is an excellent reliable portable melting furnace. It operates on 220 volts single phase supply. However the heater element receives only D.C. current and so it is TOTALLY SHOCKPROOF. It is supplied complete with digital electronic temperature controller with thumb wheel switches for precise setting of desired temperature. It is available in three models with 1/2 kg, 1.0 kg and 2.0 kg gold melting capacity. Floor Model melting furnace in two models with 2.0 kg and 5.0 kg. Gold melting capacities is also available.

Best Indian MASTER make motorized model heavy duty Chain Hammering Machine to be supplied complete with suitable electricals with controls. The approximate weight of this machine is 700 kgs.

Circle Cutting Machine is one of the principal machine in sheet metal industry. It is mainly used as the name indicates to cut circles of sheet material, annular rings & strips.

Our hand operated machines are available in models:-

14H, 18H, 24H, 24HB, 36H, 36HB & 48HB are used for cutting 18 swg MS / 22 swg SS.

Our motorised machines are available in models:-

18M2, 24M2, 36M2, 48M2 & SPM for specific size are used for cutting 14 swg / 18 swg SS.

24M3, 36M3, 48M3 & SPM for specific size are used for cutting 10 swg / 16 swg SS.

24M4, 36M4, 48M4 & SPM for specific size are used for cutting 8 swg / 14 swg SS.

hand operated notching machine is ideally suitable for making box chassis and panel blanks having stroke of ram 5/8", size of table is about 18" x 11. 3/4" and supplied complete with hardened tool steel notcher blade, adjustable table guage and handle.

This is a c frame, single point suspension, non-inclinable single action press having steel plate construction duly stress relieved, with rolling key clutch mechanism.

This is a standard work horse machine for every press shop and supplied complete with electric motor, starter, gear and fly wheel guards, one shot lubrication device. Its available in eight models from 20 tons capacity to 100 tons.

If required, inclining mechanism and motorized automatic lubrication system is offered at extra cost.

This is a cast iron body heavy duty yet easy to operate hand operated manual sheet folding machine having capacity to fold upto 1250mm length x 1. 6mm thickness mild steel sheets. The machine is very versatile with excellent design features making the operation of this folding machine easy and adjustable to suit the job requirement. The upper beam is supported by operating handle on one side and adjustable counter weight on the other side. The lower beam has the operating lifting handle which moves easily & smoothly. The entire hand folding machine is mounted on suitable fabricated stand for proper height for ease of operation. The fabricated stand is wider at the base for added stability. The sheet folding machine is supplied with one full length standard finger and others as per requirement can be supplied.

We can also supply this machine in heavier version to fold sheets upto 2. 0mm thickness against specific order.

This is an excellent quality superior design hand operated double action adjustable force type jewellery stamping press. It is ideal for marking rings, necklaces etc with purity markings such as 14 K or 18 K and is also suitable to mark small company logo or initials. The press is equipped with adjustable force feature with a lock to have best repeat impressions each time.

These jewellers' hand presses are available in six sizes. These are solid body heavy presses with 25 mm one inch hole in ram. The presses are supplied with wheel & handle and die fixing clamps. Suitable size automatic die holder is also supplied with each press. Also available are Cutting, Embossing & Coining Dies.

This is a fully hydraulic heavy duty shearing machine. Few of its salient features are as under:

>> Low cutting angle and inclined shearing direction eliminates bowing and twist.
>> Roller type guides fitted with antifriction bearings for long life.
>> Quick and easy blade clearance setting by levers.
>> Hydraulic hold downs ensures perfect cutting.
>> Remote control foot switch.

The machine is supplied complete with electric motor, hand operated back gauge with readout, front support arm, four edge HCHC shearing blades, finger guard.

This machine is available in various sizes from 1600 x 3. 2 mm to 3000 x 4 mm cutting capacity.

These are heavy duty Hydraulic Press Brake machines available in a wide range of capacities ranging from 20 tons to 500 tons in pressure and job sheet size from 1500 mm to 5000 mm in length with 1.62mm to 20 mm in thickness.

The machines are supplied complete with all standard accessories including the following:

1. Main Drive Motor
2. Electrical control panel with selection of AUTO, INCH and Single Cycle AUTO mode of operation
3. Pair of foot switches
4. Pair of lifting links
5. Fine stroke adjustment rod with limit switches
6. Front operated manual back gauge with fine setting knobs
7. One suitable 5 way die and universal upper blade- segmented or full length
8. Centralized lubrication system with hand pump
9. Pair of sheet supports
10. Bending chart
11. Maintenance tool kit
12. Comprehensive instruction & maintenance manual with CD

Many optional accessories are offered such as:

1. Motorized deflection compensation unit
2. Ram tilting arrangement
3. Hardened and ground tools & special toolings
4. Motorized back gauge with DRO
5. Sliding sheet supports with swing away stoppers for front gauging.
6. Hydraulic tool clamping
7. Photo electric finger safety guards

We also offer NC and CNC Synchro Press Brakes. Kindly ask for details with your requirements.

rolling heads of our lock forming machines are manufactured using precision machined components consisting of hardened and ground shafts running in needle roller bearing, a hardened gear train, hardened and blackened alloy steel rolls for corrosion resistance.

our lock former machine is supplied with one set of pittsburgh lock forming dies duly fitted on the machine and is supplied complete with 1. 0 hp electricals.

the production rate for our machine is 26 feet per min. The standard capacity of machine is 0. 5mm to 1mm.

we can supply you optional auxiliary rolls such as right angle flange rolls, double seam, drive cleat and plain seam rolls. We can also supply you optional auto-guide power flanging attachment.

we also have section bending machine for bending channels, angles and all related sheet metal machinery suitable for your application.

kindly ask for details

Heavy Duty Floor Model Hand Operated Manual Metal Sheet Shearing Cutting Machine.

This is extra heavy duty 2500 x 1.0 mm in mild steel capacity hand operated shearing machine. This is well constructed and ideal basic machine for various shear able materials like M.S., S.S., Aluminium, Mica, Copper, Plastic, Gaskets, Fiber etc 

This hand operated shearing machines are designed and constructed to provide high degree of stability ensuring precise burr free and accurate cutting. Cutting process is CAM actuated, very simple, safe and effortless. The machine is equipped with C.I. slides wherever required. Spring loaded hold down devices are also provided for firm clamping of sheets while cutting to ensure parallel cut.

Both lower and upper blades of machines are proper alloy steel, properly hardened and ground, having four cutting edges

The machine is available in various sizes from 1000mm upto 2500mm width and having maximum cutting capacity in MS of upto 1.6mm.

Heavy Duty Floor Model Hand Operated Manual Metal Sheet Shearing Cutting Machine.

This is extra heavy duty 2500 x 1.0 mm in mild steel capacity hand operated shearing machine. This is well constructed and ideal basic machine for various shear able materials like M.S., S.S., Aluminium, Mica, Copper, Plastic, Gaskets, Fiber etc 

This hand operated shearing machines are designed and constructed to provide high degree of stability ensuring precise burr free and accurate cutting. Cutting process is CAM actuated, very simple, safe and effortless. The machine is equipped with C.I. slides wherever required. Spring loaded hold down devices are also provided for firm clamping of sheets while cutting to ensure parallel cut.

Both lower and upper blades of machines are proper alloy steel, properly hardened and ground, having four cutting edges

The machine is available in various sizes from 1000mm upto 2500mm width and having maximum cutting capacity in MS of upto 1.6mm.

Swaging machine motorised model with standard Swage rolls with suitable stand and motor.

This is a heavy duty Casted body Swaging machine ideal for AC ducting and other such work.

The machine is having six inch depth of throat and is supplied with a set of six pieces of different shapes swage rolls suitable for this machine. It is supplied with suitable heavy cast iron stand and with motor suitable to run either on 440 volts three phase or 220 volts single phase AC electic supply.

This is a power operated over crank type guillotine shearing machine similar in construction and features to the above described under crank shearing machine. The over crank design offers larger capacity machines and the range of available models starts from 1250 x 6 mm size to 3125 x 16 mm cutting capacity in mild steel with t. S. 42 kg/sq. CMS.

The different shearing lengths size available is: 1250, 1500, 2000, 2500 and 3125 mm with the cutting thickness available in 6, 8, 10,12 and 16mm.

This is a steel fabricated mechanical power press brake with robust steel frame to ensure minimum deflection. It is provided with several salient features:

a) Twin type gear drive system provides a balanced transmission of torque on the eccentrics.
b) Fork type connecting links are mounted on the side frames thereby avoiding eccentric loads.
c) Disc type powerful clutch & brake are highly efficient.
d) Motorized Ram adjustment is provided as standard
e) Additional Bolster plate provided in higher capacity machines.

The machine is supplied complete with electric motors, control panel, stroke counter, standard Die block and punch, hand operated back gauge, guards and shot lubrication.

Precision Shaping Machine is excellent quality machine. Following are the special features of this machine.

Special Features:

* Close grain alloy castings duly seasoned with brinell hardness of 180 to 220 BHN.

* Sturdy construction ensures vibration free working.

* Tilting table with variable automatic feeds on horizontal traverse.

* Automatic lubrication system to the rocker arm bull gear & ram guides.

* Expanding type clutch drive in all geared machines to eliminate slippage

* Accuracy tested as per IS 2310-1963.

Precision Shaping Machine is supplied complete with standard accessories including Electric Motor, Starter, V-belt, Automatic Lubrication System, Swivel Box Vice, Tool Box, Instruction Manual.

These are available in a wide range of capacities from 300 mm stroke to over 1000 mm stroke length.

Multipurpose rapid bending machine equipped with a ring of needle rollers bearing for smooth bending. Model No. 4 & 5 features a ratchet mechanism with left & right movement which greatly increase forming power when working with heavy materials. For speed in working light materials, ratchet can be disengaged and bender operated on direct drive. Standard equipment includes bend locating gauge. Setting this gauge allows any number of parts to be duplicated, angle stop to determine degree of bend and locking pin to securely clamp material provides, zero radius bending block, shoulder radius pin, quill radius pin, radius collar and forming roller.

Features:
*High tensile springs for quick return of treadle.
*4 Cutting edged hardened & ground quality blades.
*Rigid and streamlined construction.
*Spring loaded sheet holding device.
*All steel fabricated construction body.

In every machine, the bed and top beam have full adjustments for correct setting and easy removal of blades for accurate cutting and for regrinding. The spring loaded pressure pad holds the The spring loaded pressure pad holds the perfect parallalism of cutting on either side. The adjustable front and back guages with running Tee slots facilitate adjustment of various widths of the cuts and avoid any kind of twistings, turning of sheets while cutting. Square guide on the side of the table facilitates square cuts. The cutting edge blades avoid frequent grinding & adjustment and also very easy to grind to the rectangular shape.

These blades can be used with slight change in cutting angle to ribs, plastics, card board, rubber, mica etc., without any sign of squeezing or crushing.

This is a power operated under crank type guillotine shearing machine featuring all steel body solid construction for accuracy and dependability. The crankshaft runs in gun metal bushes and fly wheel shaft runs in ball bearings for smooth trouble free operation. It is supplied complete with four edge HCHC shearing blades, electric motor, hand operated back gauge, front gauge, side gauge, belts, guards and shot lubricator.

It is available in various sizes from 1250 x 4 mm to 3125 x 5 mm cutting capacity in mild steel with T.S. 42 kg/sq. cms.

universal sheet folding machine is extremely versatile machine suitable for many applications. This heavy duty sturdy machine is well fabricated from mild steel with hinge points in roller bearings for effortless folding. The eccentrics and other pins are made from alloy steel duly hardened. Our universal folding machine incorporates adjustable truss bars which ensures accurate and straight folding even for full length jobs.

the sides of the machine are well fabricated using m. S. Tee and i beam. Both sides are connected with three tie bars to maintain strength.

the upper beam – ram, of the machine is reinforced properly and equipped with three adjustable truss bars. It can move upto 200 mm to fix various types of fingers to facilitate taking different types of bends. It moves in dovetail slides for accurate work.

clamping of sheet is done by the lower beam – table, which moves on the i beam. The movement of this lower beam is operated by two independent eccentrics on each side, aided by two strong springs to reduce the clamping pressure. Lower beam is also equipped with two adjustable truss bars.

the folding beam – apron, is adjustable vertically for taking sharp as well as radius bends. Adjustments can be done by apron bolts. Angle selector gauge is also provided for repeated jobs. Two handles on beam and two counter weights for effortless bending are fitted at the side of the paddle of apron. The movement of the counter weights is possible which allows to change the effective force depending upon the job.

these universal folding machines are available in various lengths of 1250mm, 2000mm or 2500mm with thickness of sheets upto 2. 0mm in mild steel. The normal jaw opening is 75mm and bending angle upto 135 degrees.

This fully hydraulic shearing machine is very versatile, reliable and efficient, designed and built to high standard to meet the requirement of precision sheet and plate working applications. Fast and accurate motorized back gauge with front digital readout is a standard with all models of this machine. The back gauge travels on precision lead screw. The machine also features:

· over-driven moving beam with two cylinders operating in series for even cutting.
· mono block dc solenoid valve ensures a smooth reversal hydraulic system.
· rake angle can be varied by pre selection through a selector switch to permit shearing higher thickness than normal capacity.
· front operated rake angle adjustment of 0. 5 degree to 2. 5 degrees allows optimum rake angle setting required to produce perfect cut with minimum twist and bow.
· top beam is guided by four point roller guides. It is equipped with replaceable hardened liners.
· quick and easy blade clearance setting by calibrated levers.
· individual hydraulic hold downs to ensure perfect cutting.
· shadow line indicator is useful for cutting on scribed lines.
· safety finger guard allows the operator to cut the material close to the cutting edge.

In addition to all the above features, the machine is supplied complete with electricals, fine stroke adjustment rod with limit switches, front sheet supports, squaring arm on left end with steel rule and disappearing stop, hardened transfer bars mounted on table, four edge hchc shearing blade.

This model of the hydraulic shearing machine is available in cutting lengths of 1600, 2650, 3150 and 4150mm with cutting thickness in mild steel with normal rake angles of 6, 8, 10, 13, 16 and 20mm capacities.