The precision engineered internal gears offered by us come with cylindrical pitch surface with teeth parallel to the axis. Their superior construction standards allow even carrying and distribution of the load. This in turn helps in decreasing the pressure intensity as well as in increasing the life of the gear.

Features:

• Designed to accommodate a wide range of equipment
  
• Cost effective
  
• Offers low sliding & high stress loading
  
• Used in planetary gears to produce large reduction ratios.
  
• Their non-binding tooth design ensures smooth, quiet operation
  
• Used to transmit rotary motion between parallel shafts
  

Applications:

The main applications of internal gears are in:

• Rollers
  
• Indexing
  
• Timing
  
• Other light duty applications
  

  The range of spur gears offered by us are used for transmission of rotary motion between parallel shafts. Available in a ratio range of between 1:1 and 1:6 & pitch line velocity up to 25 m/s, their silent low-vibration operations ensure operating efficiency of 98-99%.

Features:

• Pinion made from harder material than the wheel
  
• Highest number of teeth consistent with suitable safety margin in strength & wear
  

Standard Materials

• Steel (En353, En24 and 8620)
  
  

Outside Diameter

• Max : 600mm
  
• Min : 25mm
  

Pitches

• 1mod to 8mod

Pressure Angle

• 20°
  
  

Face Width

• Max : 130mm (5")

The range of spur gears offered by us are used for transmission of rotary motion between parallel shafts. Available in a ratio range of between 1:1 and 1:6 & pitch line velocity up to 25 m/s, their silent low-vibration operations ensure operating efficiency of 98-99%.

Features:

• Pinion made from harder material than the wheel
  
• Highest number of teeth consistent with suitable safety margin in strength & wear
  

Standard Materials

• Steel (En353, En24 and 8620)
  
  

Outside Diameter

• Max : 600mm
  
• Min : 25mm
  

Pitches

• 1mod to 8mod

Pressure Angle

• 20°
  
  

Face Width

• Max : 130mm (5")

The range of spur gears offered by us are used for transmission of rotary motion between parallel shafts. Available in a ratio range of between 1:1 and 1:6 & pitch line velocity up to 25 m/s, their silent low-vibration operations ensure operating efficiency of 98-99%.

Features:

• Pinion made from harder material than the wheel
  
• Highest number of teeth consistent with suitable safety margin in strength & wear
  

Standard Materials

• Steel (En353, En24 and 8620)
  
  

Outside Diameter

• Max : 600mm
  
• Min : 25mm
  

Pitches

• 1mod to 8mod

Pressure Angle

• 20°
  
  

Face Width

• Max : 130mm (5")

The range of helical gears offered by us feature parallel shafts that result in smoother action as the load is transferred uniformly & gradually as successive teeth come into play. Their precision construction standards also help in reducing noise and vibration and ensure smoother running gear train.

Materials Available:

• Hardened steel
  
• Steel
  
• Aluminum
  
• Bronze
  

Range:

• Stainless Steel Helical Gears
  
• Aluminum Helical Gears
  
• Hardened Steel Helical Gears
  
• Others
  

We offer clients precision engineered range of worm gear. These feature robust construction standards and combine in it superior strength & wear resistance properties. Further the computer aided designing of wheels also ensure optimization of the involved geometry.

Features:

• Provides ease of servicing
  
• Optimized gear geometry based on computer aided sizing of gear based on geometric progression
  
• Come with high efficiency & load carrying capacity
  

The precision engineered range of bevel gears offered by us are available in varied sizes as per the specifications provided by the clients. Our well developed testing facilities also allow us to deliver in them optimum functionality and service life standards.

Features:

• Available in varied sizes
  
• Capability to develop gearing solutions as per clients given specifications
  
• Expertise in reverse engineering and manufacturing as per the requirements
  

The worm offered by us are available in both metric and imperial sizes as per the specific application requirements of the clients. The worms offered by us are available in finishes like pilot bored from stock, specially bored & keyed to clients requirements.

Features:

• Available in Steel (En202) finish
  
• Wheels are available in plain sided, single and double bossed in phosphor bronze
  
• Anti-backlash worm wheels are available in metric & imperial sizes

The worm wheels offered by us are available in both metric and imperial sizes as per the specific application requirements of the clients. The worms offered by us are available in finishes like pilot bored from stock, specially bored & keyed to clients requirements.

Features:

• Available in Steel (En202) finish
  
• Wheels are available in plain sided, single and double bossed in phosphor bronze
  
• Anti-backlash worm wheels are available in metric & imperial sizes
  

We offer clients precision engineered gear or spline shafts that feature a series of ridges on drive shaft to transfer the torque. Available in non helical, involute or straight-sided finishes, these are used to transfer rotational motion over a variety of distances.

Features:

These are available in a number of options including:

• Teeth
  
• Pitch diameter
  
• Face width
  
• Distance to be traveled
  
• Length
  

Available Varieties:

• Aluminum industrial gears
  
• Brass industrial gears
  
• Bronze industrial gears
  
• Cast iron industrial gears
  
• Steel industrial gears
  
• Hardened steel industrial gears
  
• Stainless steel industrial gears
  
• Others
  

We design and engineer high precision helical gear boxes designed for Rolling Mills and a variety of other applications in various industries like:

• Cranes
• Material Handling
• Sugar Mills
• Rubber Mills
• Crushers

We manufacture Single Stage, Double Stage and Multiple-Stage Helical Gear Boxes. The body is made of Cast Iron or is M.S. fabricated, depending on the application.

The sprockets offered by us are precision designed and constructed to meet the specific operational requirements of different power transmission & conveyor systems. These are manufactured using superior grade cast iron, sintered metal, carbon steel and other metals.

Features:

• Inserted sprockets are designed to reduce noise & ensure smooth operations
  
• Ensure economic & reliable operational standards of drive system for long running and continuous drive applications
  
• Capability to withstand maximum absorption of shock & minimum torque loads