Development Boards

Introduction

ARM7 LPC2148 Development Board is a powerful development platform based on LPC2148 ARM7TDMI microcontroller with 512K on-chip memory. This board is ideal for developing embedded applications involving high speed wireless communication, USB based data logging, real time data monitoring and control, interactive control panels etc. The on-chip USB controller provides direct high speed interface to a PC/laptop with speeds up to 12Mb/s. The UART boot loader eliminates need of an additional programmer and allows you to program using serial port.  The on board peripherals include SD/MMC card interface, USB2.0 interface, 4Kbit I2C EEPROM, Xbee wireless module interface, ULN2003 500mA current sinking driver, L293D DC motor controller, 16X2 character LCD and many more. The on-chip peripherals and the external hardware on the development board are interconnected using pin headers and jumpers. The I/O pins on the microcontroller can be accessed from a 50 pin male header. The board is made from double sided PTH PCB board to provide extra strength to the connector joints for increased reliability. It supports the operating supply voltage between 7V to 14V and has built-in reverse polarity protection.

Note: 

Xbee wireless module and SD/MMC card are not included with the board.
The input supply voltage more than 12 V can damage the board. Please use 2V, 1A switch Mode Power Supply

Specifications

• Microcontroller: LPC2148 with 512K on chip memory
• Crystal for LPC2148: 12Mhz
• Crystal for RTC: 32.768KHz
• 50 pin Berg header for external interfacing
• Operating Supply: 9V DC/AC
• 2.4GHz ZigBee (XBee) wireless module adaptor
• 512 bytes of I2C external EEPROM
• USB Type B Connector
• SD / MMC card holder
• 10pin(2X5) FRC JTAG connector for flashing and debugging
• 50 Pin Expansion header
• 2x16 Character Alphanumeric LCD
• L293D 600mA Dual DC motor Driver
• ULN2003 500mA driver
• Dual RS232 UARTs for external communication
• Real-Time Clock with Battery Holder
• 2 Analog Potentiometers connected to ADC
• TSOP1738 IR receiver
• 4 USER Switches
• 4 USER LEDs
• Reset and Boot loader switches
• 3V button cell for on chip RTC
• ON/OFF switch
• Buzzer
• Schematics and Application examples in KEIL provided in the documentation CD

Pic development board for 40P package ( Compatible with ICSP for all Programmers)


Features 

• PIC Development Board for Microchip PIC Series ( EX 16F877 - 40 pin)
• RJ11 Socket For Programming Through PIC PROG, PIC PLUS, PICICD2
• During Testing Easy to Remove Chips with ZIP Socket
• On board Regulated Power- Optional Supply 5v,12v supply
  
• Easy to test with Burg Connecters wires
• An RS232 Serial Port
• 7Seg Mulitplexed Display
• DC Power Supply Connector(12v Ac or Dc)
• LCD display 2linex16Character
• 24Cxx I2C EEPROM
• RTC DS1307
• 8 LED array
• Matrix Key Pad
• 4 Intruupt Switchesr
• Example Programs for LED,7seg,LCD,RS232 ,Matrix Key Pad, ADC
• EXtra Adapters for 28Pin , 18Pin,14 Pin Chips ( By Order)

Package Contents 

• PIC Development Board
• Incudes RS232, ULN 2003, RTC1307, I2C 24C04
• Burg Connecters 20 Nos
• Software CD (Data sheets,Example Porograms,Manua ,Schematic)

Features 

• AVR Development Board for Atmel AVr series(
• ISP Socket for Flashing thru AVR Dude and AVR Prog
• On board Regulated Power Supply 5v,12v supplys
• Easy to test with Burg Connecters wires
• An RS232 Serial Port
• 7Seg Mulitplexed Display
• DC Power Supply Connector(12v Ac or Dc)
• Rdy Interfac For LCD display 2linex 16 Character
• 24Cxx I2C EEPROM
• RTC DS1307
• 8 LED array
• Matrix Key Pad
• 4 Intruupt Switcher
• Eaxample Programs for LED, 7seg, LCD, RS232, Matrix
• 1Ch Relay For testing

Package Content

• AVR Development Board ( With chips RS232, RTC1307, I2C24004, ULN2003)
• Burg Connecters 20 Nos
• Software CD( Data sheets,Example Porograms,Manual,)

MINI2440 | S3C2440 ARM9 Board

Friendly ARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 ARM9 processor. The board measures 10 cm x 10 cm, ideal for learning about ARM systems. 
Specification

• Dimension: 100 x 100 mm
• CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz)
• RAM: 64 MB SDRAM, 32 bit Bus
• Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS
• EEPROM: 1024 Byte (I2C)
• Ext. Memory: SD-Card socket
• Serial Ports: 1x DB9 connector (RS232), total: 3x serial port connectors
• USB: 1x USB-A Host 1.1, 1x USB-B Device 1.1
• Audio Output: 3.5 mm stereo jack
• Audio Input: Connector + Condenser microphone
• Ethernet: RJ-45 10/100M (DM9000)
• RTC: Real Time Clock with battery
• Beeper: PWM buzzer
• Camera: 20 pin Camera interface (2.0 mm)
• LCD Interface
  • STN Displays
  • TFT Displays
  • 41 pin connector for FriendlyARM Displays (3.5" and 7") and VGA Board
• Touch Panel: 4 wire resistive
• User Inputs: 6x push buttons and 1x A/D pot
• User Outputs: 4x LEDs
• Expansion: 40 pin System Bus, 34 pin GPIO, 10 pin Buttons (2.0 mm)
• Debug: 10 pin JTAG (2.0 mm)
• Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
• Power Consumption: Mini2440: 0.3 A, Mini2440 + 3.5" LCD: 0.6 A, Mini2440 + 7" LCD: 1 A
• OS Support
  • Windows CE 5 and 6
  • Linux 2.6
  • Android

MINI6410 | S3C6410 ARM11 Board

Friendly ARM Mini 6410 SBC (Single-Board Computer) with 533 MHz Samsung S3C6410 ARM11 processor. The board measures 11 cm x 11 cm, ideal for learning about ARM systems. 
Specification

• Dimension: 110 x 110 mm
• CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S with VFP-Unit and Jazelle (max freq. 667 MHz)
• RAM: 128 MB / 256 MB DDR RAM, 32 bit Bus
• Flash: 256 MB / 1GB NAND Flash
• EEPROM: 1024 Byte (I2C)
• Ext. Memory: SD-Card socket
• Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors
• IR: Infrared Receiver
• USB: 1x USB-A Host 1.1, 1x miniUSB Slave/OTG 2.0
• Audio Output: 3.5 mm stereo jack
• Audio Input: Condenser microphone
• Ethernet: RJ-45 10/100M (DM9000)
• RTC: Real Time Clock with battery
• Beeper: PWM buzzer
• Camera: 20 pin Camera interface (2.0 mm)
• TV Output: CVBS
• LCD Interface
  • STN Displays
  • TFT Displays
  • 40 pin (2.0 mm) and 41 pin connector for Friendly ARM Displays (4.3" and 7")
• Touch Panel: 4 wire resistive
• User Inputs: 8x push buttons and 1x A/D pot
• User Outputs: 4x LEDs
• Expansion: 40 pin System Bus, 30 pin GPIO, 20 pin SDIO (SD, SPI, I2C), 10 pin Buttons (2.0 mm)
• Debug: 10 pin JTAG (2.0 mm)
• Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
• Power Consumption: Mini6410: 0.25 A, Mini6410 + 4.3" LCD: 0.5 A
• OS Support
  • Windows CE 6
  • Linux 2.6
  • Android
  • Ubuntu

TINY6410 | S3C6410 ARM11 Stamp module

Friendly ARM Tiny 6410 Stamp Module with 533 MHz Samsung S3C6410 ARM11 processor. 
Specification: Stamp Module

• Dimension: 64 x 50 mm
• CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S with VFP-Unit and Jazelle (max freq. 667 MHz)
• RAM: 128 MB / 256 MB DDR RAM, 32 bit Bus
• Flash: 256 MB / 1GB NAND Flash
• Serial, SPI, USB, LCD, CMOS Camera Interface
• Analog Input and Output
• User Outputs: 4x LEDs
• Expansion headers (2.0 mm)
• Debug: 10 pin JTAG (2.0 mm)
• OS Support
  • Windows CE 6
  • Linux 2.6
  • Android
  • Ubuntu

 

Specification: SDK-Board

• Dimension: 180 x 130 mm
• EEPROM: 1024 Byte (I2C)
• Ext. Memory: SD-Card socket
• Serial Ports: 4x DB9 (RS232)
• IR: Infrared Receiver
• USB: 1x USB-A Host 1.1, 1x miniUSB Slave 2.0
• Audio Output: 3.5 mm stereo jack
• Audio Input: 3.5mm jack
• Ethernet: RJ-45 10/100M (DM9000)
• RTC: Real Time Clock with battery
• Beeper: PWM buzzer
• TV Output: CVBS
• LCD: 40 pin (2.0 mm) and 41 pin connector for FriendlyARM Displays (4.3" and 7") and VGA Board
• Touch Panel: 4 pin (resistive)
• User Inputs: 8x buttons and 1x A/D pot
• Expansion headers (2.0 mm)
• Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)

 

 

MINI210 | S5PV210 ARM CORTEX-A8 Board

Friendly ARM Mini 210 SBC (Single-Board Computer) with 1 GHz Samsung S5PV210 ARM Cortex-A8 processor. The board measures 130 x 115 mm, ideal for learning about ARM Cortex-A8 systems. 
Specification

• Dimension: 130 x 115 mm
• CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
• RAM: 512 MB DDR2 RAM, 32 bit Bus
• Flash: 1GB NAND Flash
• EEPROM: 256 Byte (I2C)
• Ext. Memory: 2x microSD-Card socket
• Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors
• IR: Infrared Receiver
• USB: 1x USB-A Host 2.0, 1x miniUSB Slave/OTG 2.0
• Audio Output: 3.5 mm stereo jack, connector for a speaker (Class D Amp)
• Audio Input: Condenser microphone
• Ethernet: RJ-45 10/100M (DM9000)
• WiFi/WLAN: on board SD-WiFi with ceramic antenna
• RTC: Real Time Clock with battery
• Beeper: PWM buzzer
• Camera: 2x 20 pin (2.0 mm) Camera interface
• TV Output
• Monitor: mini HDMI (type C)
• LCD Interface: 50 pin (2.0 mm) and 41 pin (1.0 mm) connector for Friendly ARM Displays
• User Inputs: 8x push buttons and 1x A/D pot
• User Outputs: 4x LEDs
• Expansion: 40 pin GPIO (ADC, I2S, I2C, SPI, PWM, IO...), 20 pin SDIO (SD, SPI, I2C), 20 pin Buttons (2.0 mm)
• Debug: 10 pin JTAG (2.0 mm)
• Power: regulated 5V (DC-Plug)
• OS Support
  • Linux 2.6
  • Android