Macnet TechnologyMacnet Technology
Home Profile Our Product Range Contact Us

IC Programmers

Share: Facebook Twitter Stumbleupon

TOP IC Progrmaer :- TOP853, TOP2005 , TOP2009, TOP3000,
Wellon IC Programer :- VP290 , VP590, GP10, VP990, GP20,                                            GP204S,GP204
SMART PRO :-Mini Pro, X5 , X8 ,5000U
GENIUS  :- G540 , G840

Top IC Programmers

  • USB interface, Win98/Me/2000/xp

  • Features: small size, without an external power supply,
    Even for reliable, support 5 V ~ 6.5V device,
    General locking socket, low prices.

  • Support the device list
  • Also available
  • Top2005+
  • Top2007
  • Top2049
  • TOP3000
  • TOP3100
  • 8051 low cost programer

Top IC Programmers

Wellon IC Programmer

• dimension:166¡á98¡á23mm,weight:290g.
• 48 pin zif socket with universal pin-drivers.
• interface with laptop, pc, ps/2 or compatibles through usb port
• accepts standard file formats: jedec, intel (extended) hex, motorola s record
• manages 16 and 32-bit word split (set programming)
• support most compiler in jedec format including abel, cupl, palasm, tango pld, orcad
  pld, pld designer and isdata
• features test vector capability and multiarray fuse map editor
• test ttl/cmos logic ics and dynamic/static random access memory devices
• optimum programming for each individual device
• automaticly identifies the manufacturer and type of e(e)proms, auto identifies ttl/cmos
  logic ic
• device insertion and poor-pin-contact check
• support 1. 5v low voltage devices
• not need exterior adapter for mostly devices
• universal dip, plcc, qfp, tsop, psop, soic, ssop, sdip adapters
• auto-run mode starts programming automatically upon detection of chip insertion
• super programming speed. Programs 89c55 in less than 8 seconds
• supports windows2000/nt/9x/me/xp/vista
• supports eight languages, such as chinese(simplified),chinese(traditional),english, korean,
• poland, italian, portuguese and dutch.

also available

vp290 ic programer

vp590 ic programer

vp790 ic programer

vp990 ic programer


Wellon IC Programmer

TL866 Universal Programmer

Item Code: 610

·         Model: AUTOELECTRIC TL866CS

·         Color: Grey

·         Material: Neat robust enclosure; Plastic housing

·         40pin ZIF socket, fully automatic; Fast mode SPI support;

·         Real True USB interface for both data transfer and power supply;

·         High speed/fastest; most-user-friendly; simplest-to-use;

·         Low consumption, USB power supply, no external power supply needed

·         40 pin over voltage protection; VPP, VCC class 4 over current protection

·         Wide range chipset 6000 + support, support serial series, parallel series chip thousands of species. 40/44/48 pin large capacity flash

·         Test CMOS4000 74/54 series of integrated circuit.

·         Complete chip serial number function.

·         Supports: Windows 2000 / XP / 2003 / 2008 / Vista / 7 32-bit/64-bit

·         Multi-languages support capability: Chinese, English.

·         Software update regularly; free life-time software upgrade/download.

·         Supports thousands of most popular application devices (6000+)

·         Please refer to for more details

·         Packing list:

o    1 x Programmer

o    1 x USB cable (110cm)

o    1 x CD


TL866 Universal Programmer

EZP2010 USB High Speed Programmer

Item Code: 611

·         Model: EZP2010

·         Color: As shown in the picture

·         Material: Plastic housing

·         USB 2.0 port

·         High speed up to 12Mbps

·         It only takes 3sec to read EN25T80, 9sec to write EN25T80

·         Automatically recognize the chip model and detect if the chip is in place

·         Automatically add from master chip to empty chip without connecting to PC

·         Supports PC software and programmer upgrade

·         Supports 25 FLASH /24 EEPROM /25 EEPROM /93 EEPROM

·         Supports Windows 2000 / Windows XP / Windows Vista

·         Support Chinese and English

·         Suitable for home appliance repairer to write the chip on TV, DVD, PC main board, HDD; products development and factory mass production

·         Dimensions: 69 x 45 x 18 mm / 2.72 x 1.77 x 0.71 inch

·         Weight: 39 g / 1.38 oz

Package Contents:

·         1 x Programmer

·         1 x USB cable

·         1 x CD

·         1 x Power Supply

·         1 x Expansion Board

EZP2010 USB High Speed Programmer


Item Code: 612

USB interface for 5V power to download and target board, in case short-circuited, computer motherboard dangerous. USB power port plus a 500 mA self resettable fuse to prevent damage to the computer USB port (USB port over current protection, but more than a protection more secure). When the output current is greater than 500 mA (overcurrent or short circuit), will immediately cut off the current resettable fuse to protect the computer motherboard. When the lifting of the short-circuit, self-resettable fuse will automatically return to normal conditions, the programmer can continue normal use!

* specifically designed for notebook computers, the ad hoc two 3.6V regulator, a perfect match, get rid of the hidden dangers of instability of the hardware circuit level!

   Hardware circuit design, does not simplify out any effect on the stability of the devices, especially the 3.6V regulator is determined not to province, to ensure that the level matching. PCB in accordance with the standards of high-speed board design, first-class stability. 10-pin isp socket mount one on the board, on the one hand, space-saving and beautiful, the most critical is not with the multiple plug and loose.special carefully selected firmware super automatic speed control function, to obtain the best balance between stability and speed!

   USBASP and parallel port download cable, and its internal firmware. Firmware version, good or bad is different, the public version of the firmware to governor jumper two steps of the governor, inconvenient and speed rating; we have carefully selected and modified the firmware to achieve multi-level automatic speed control.

An example: AVR microcontroller factory was a 1MHz internal oscillator circuit, then the firmware with a lower speed automatically download its download about 4K program shall 3 seconds; for the same model using an external 12MHz crystal microcontroller, the clock speed up can support higher download speed, download the same program, the firmware automatically accelerated, the download only to be less than one second. The above experiment reflects the automatic speed control, customers can verify their own!

Supported microcontrollers include:






















  Package Included:

 1 X Black EvUSBASP

 1X 10 pin cable (65cm or so)


St-link/v2 In-circuit Debugger/ Programmer

Item Code: 614

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

In addition to providing the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 2500 VRMS.

STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

Key Features
  • 5 V power supplied by a USB connector
  • USB 2.0 full speed compatible interface
  • USB standard A to mini B cable
  • SWIM specific features
  • 1.65 V to 5.5 V application voltage supported on SWIM interface
  • SWIM low-speed and high-speed modes supported
  • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
  • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
  • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
  • JTAG/serial wire debugging (SWD) specific features
  • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
  • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
  • JTAG supported
  • SWD and serial wire viewer (SWV) communication supported
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C
  • 2500 VRMS high isolation voltage (ST-LINK/V2-ISOL only)


St-link/v2 In-circuit Debugger/ Programmer

Vp812 IC Programmers

Item Code: 609


Ø  Supports ATMEL series MCU ( 8051 and AVR )

Ø  Support Win bond new 8051 MCU, such as W78E052D/054D/058D/516D.

Ø  Support SyncMOS MCU.

Ø  Support STC series MCU.

Ø  Support PIC series MCU.

Ø  Support AVR series MCU from ISP downloading and some AVR MCU with high voltage programming.

Ø  Support 25 series EEPROM/FLASH.

Ø  Support NXP (Philips) 8051 MCU

Ø  Support common used 29 series Parallel EEPROM 32 pins.

Ø  Support common used 39 series Parallel EEPROM 32 pins.

Ø  Support common used 49 series Parallel EEPROM 32 pins.

Ø  Support TTL flash boot loader.

Ø  Use high quality 40 pins IC locker holder.

Ø  USB communication supports WinXP/Vista/Win732/64 bits) System.

Ø  Support firmware updates.

Ø  Supports circuit protection.


Vp812 IC Programmers

PICkit 3

Item Code: 333
The PICkit 3 allows debugging and programming of PIC(R) and dsPIC(R)
Flash microcontrollers using the powerful graphical user interface of the
MPLAB Integrated Development Environment (IDE). Please note: a
RJ-11 to ICSP adaptor (AC164 110) is required when using the
PICkit 3 with MPLAB ICD Headers

PICkit 3


Item Code: 331

The PICkit 2 Programmer-To-Go functionality allows a PIC MCU memory image to be downloaded into the PICkit 2 unit for later programming into a specific PIC MCU. No software or PC is required to program devices once the PICkit 2 unit is set up for Programming-To-Go. A USB power source for the PICkit 2 is all that is needed. 


  • USB Power for PICkit 2 Programmer-To-Go
  • Supported PIC MCU Devices
  • Memory Image Size Limitations
  • Pickit2 Programmer-To-Go Wizard Walkthrough
  • LED Status Codes

This PiCKIT2 can Be used as a Programmer and Debugger also / Very usefull for Manufacturers for Bulk Programming 

Pacakge Content

  • PICKIT2 Programmer/ Debugger
  • USB Cable
  • CD Softwares


G540 IC Programer

Item Code: 600
Genius G540 universal programmer
weight:0.55KG(with the packing)

Genius G540 is one of the programmer that Independent research and development by Shenzhen stager Electronic Co., Ltd.
G540 programmer make erase, blank check, programming, comparison and encryption functions as one key programming in order to improve the efficiency of users.We can also change the default set of one key programming for different IC programming,choosing the steps we need.

40 pins Locking Socket.
Powered by USB2.0.Without external power supply.
The software is compatible with the Windows2K/XP/Vista.
Pin contacting detection:in the cases of poor conect between the IC and the sockt or error place, the informations will be detected and the operation will be broken.
Perfect defenses. That both avoid effectively to damage user's device and protect itself.

Standard package contains the following:
A programmer module
A USB connecting cable
The installation software CD
User's Guide

G540 IC Programer

Jlink V8 Arm Simultation Tool Kit

Item Code: 606
Product Description

This item may not work with the latest SW software or M4 devices.

  • Use JLINK V8 original firmware, supports automatic upgrade.
  • Design based on the original JLINK V8 circuit schematic design.
  • Design based on the original JLINK V8 circuit layout design.
  • Design based on the original JLINK V8 line alignment.
  • Power circuit using large capacity non-polar capacitor as a filter, the same as the original JLINK V8.
  • The USB-seat shell ground through a resistor and capacitor in parallel (a lot of businesses to simplify this, but directly to ground), the same as with the original JLINK V8.
  • The use of a red and green LED indicates that the inner workings of state (green light indicates working state, a red light indicates the reset state), the same as the original JLINK V8.
  • SWD and JTAG support 1.2-5V voltage output circuit using two the Philips 74ALVC164245, the same as the original JLINK V8.
  • The double protection: JLinkUSB mouth the esd protect the ic full protection! 500 mA resettable fuse to protect the USB port, full protection!
  • The OUR JLink 1.5A Large current 8550 triode power on command output 400ma current Your product can be powered directly by JLINK simulation, very convenient!
  • This product is designed for the original JLINK V8 goal, stable performance, at or near the the original JLINK V8 performance.
  • With V7 comparison test, you can clearly feel the V8 erase and program faster and more smoothly.
  • SMT production machines, strict quality inspection, the quality of the products 100% qualified, please feel free to use.

Link is a the SEGGER company launched JTAG emulator for ARM core chip to support simulation. IAR EWARM, ADS, KEIL, WINARM, RealView and other integrated development environment with the support all ARM7/ARM9 kernel chip simulation and seamless connectivity through the RDI interface and the integrated development environment, easy to operate, easy to connect, easy to learn, learning to develop ARM the best and most practical development tools.

More Feature:
  •  The IAR EWARM integrated development environment seamlessly connected JTAG emulator
  • Support all ARM7/ARM9 kernel chip, as well as cortex M3, including Thumb mode
  • Support for ADS, IAR, KEIL, WINARM, REALVIEW almost all development environment
  • Download speeds ARM7-: 600kB / s, ARM9: 550kB / s, through the DCC up to 800 kB / s
  • The maximum JTAG speed 12 MHz
  • Target board voltage range 1.2V-3.3V, 5V compatible
  • Auto speed recognition
  • Monitoring all JTAG signals and target board voltage
  • Fully Plug and Play
  • USB power (but not the target board power supply)
  • With a USB cable and 20-pin flat cable
  • Support for multiple JTAG device serial connection
  • 20-pin standard JTAG emulation plug
  • With J-Link TCP / IP server, allows to use the J-Link via TCP / IP network

Supports: ARM7TDMIRev 1; ARM7TDMIRev 3; ARM7TDMI-SRev 4; ARM720T * ARM920T; ARM926EJ-S; ARM946E-S; ARM966E-S; ARM11; Cortex-M3

Jlink V8 Arm Simultation Tool Kit

ULINK2 Debug Adapter for ARM/Cortex

Item Code: 606A


  • ARM USB Compatible JTAG Adapter Debugger Keil Ulink-II

    Ulink 2 deos not need any specific drivers. It is automatically configured as a HID by Plug and Play in Windows.

    Latest Upgraded version of the ULink emulator.
    Not only has the ULINK2 emulator all the features of ULINK, but also serial wire debug (SWD) support,
    Clock return support and features such as real-time agent.
    Conveniently carried out target hardware on-chip debugging (using on-chip JTAG, SWD, and OCDS), Flash Programming ..
    Standard Windows USB driver support Plug and Play ULINK2,
    Support for ARM Cortex-M3-based serial wire debug,
    Support the program to run during the read-write memory, terminal emulation and serial debug output,
    Support 10-pin cable (also supports 20-pin cable)

    Breakpoints RAM : Unlimited
    ROM Breakpoints (ARM7 / 9) : 2 max
    ROM Breakpoints (Cortex-M3) : 6 max
    Execution breakpoints (Set While Executing) : yes
    Access Breakpoints (ARM7 / 9) : 2 max (R / W Only, With Value)
    Access Breakpoints (Cortex-M3) : 4 max (With Value)
    Trace History : no
    Real-Time Agent : yes
    JTAG clock : <= 10MHz
    JTAG RTCK support (Return Clock) : yes
    Memory R / W (Bytes / sec) : 28K
    Flash R / W (Bytes / sec) : 25K
    Single-Step (Fast) (Instructions / sec) : 50


  • Color: White
    Item size: 112*56*23mm
    Cable length: about 1.5m
    Net weight: 154g
    Package weight: 174g


Packet content:

  • 100% Brand New

  • 1 x Ulink2 USB JTAG Adapter

  • 1 x Cable USB 2.0

  • 1 x CD

ULINK2 Debug Adapter for ARM/Cortex


Contact Us

Macnet Technology
Vishal Gala (CEO)
No. 18, Shree Ganesh Bhuvan, Kalpana Building, Floor No. 357, Lamington Road, Grant Road East
Mumbai - 400007, Maharashtra, India

Contact via E-mail

Contact via SMS

Home|Profile|Our Product Range|Site Navigation|Contact Us
Member © Macnet Technology. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited