Macnet TechnologyMacnet Technology
Home Profile Our Product Range Contact Us


Showcase Gallery



Home » Our Product Range » Sensor Module

Sensor Module

SENSOUR MODULE :- SHARP RANG  FINDER , TEMP, ULTRASONIC, GAS MOULE, PIR MODULE, HUMIDITY MODULE,MICROWAVE MODULE,DUST MODULE,ACCELEROMETER 3 AXIS, CAMERA MODULE, COMPASS  I2C , TILT, SOUND,METAL,COLOUR .....

Sensor Module



HSM -20G Humidity Sensor Module


Description

HSM-20G Humidity Sensor Module
Description :
1. Use voltage : DC 7V 2. Storage temperature Tstg-40 to 85C
3. Storage Humidity range Rhstg 0 to 100%RH
4. Humidity Operating range RH 0 to 99% RH
5. Temperature Operating Range Ta - 30 to 80C



HSM -20G Humidity Sensor Module




HF3223/HTF 3223 Temperature & Humidity Module


HF 3223/HTF 3223 Temperature & Humidity Module

Description :

1. Use voltage : DC 7V 2. Storage temperature Tstg-40 to 85C

3. Storage Humidity range Rhstg 0 to 100%RH 4. Humidity Operating range RH 0 to 99% RH

5. Temperature Operating Range Ta - 30 to 80C



HF3223/HTF 3223 Temperature & Humidity Module




SY- HS 230 Humidity Sensor Module


SY-HS - 230 Resistance type Humidity Sensor Module
Description :
1. Use voltage : DC 5V 2. Operating temperature 0~60C (32~140F)
3. Operating Humidity 95%RH or less 4. Humidity output 0~3.3V
5. Measurement accurac y +_5%RH (at 25C, from 40%RH to 80%RH)
6. Temperature output Resistance R(25C=10kE)
7. Temperature detecting specification ? Value (25/50) = 3450 +_ 1%



Also available SY- HS 220 Humidity Sensor Module



SY- HS 230 Humidity Sensor Module




VR In 81 Zx Metal Detector


Description

ZX-Metal


  • Detect presence of any metallic object

  • Detection Indicator

  • Digital output. Active with logic “0”

  • Operation range varies according to size of the metallic object

  • Adjustable sensitivity

  • An easy removable searching coil screw based terminal block

  • JST connector for supporting all of INEX controller board

  • Interface with any microcontroller

  • The module has a plastic protection tray

  • Supply voltage of +5V from the main controller board that interfaced via JST connector.

  • Available with a small searching coil. Activated via a simple proximity switch.

Includes : ZX-METAL board, JST3-8AA cable (1), Small searching coil (1) and Documentation



VR In 81 Zx Metal Detector




VR IN 80 ZX Sound Board


Description

ZX-Sound

Sound detection module
Detects sound pressure with Condenser Microphone.
Output voltage 0 to +5V varies from sound pressure level that microphone detected. If more pressure is applied, the output voltage goes high and vice versa.



VR IN 80 ZX Sound Board




VR IN 79 ZX -TILT


Description

4-Direction Tilt sensor
Sharp GP1S036HEZ Tilt sensor with built-in super compact ball for detecting tilt direction.
Active with 2-bit logic
2 Status LED indicators.
Detects 4 directions : 0, 90, 180 and 270 degree. 0o range is 330 to 360 or 0o 90o range is 60 to 90o 180o range is 150 to 180o 270o range is 240 to 270o
Suitable supply voltage +5Vdc.



VR IN 79 ZX -TILT




VR IN 78 ZX -Temp NTC Thermistor


Description

VR IN 78 ZX -Temp  Temperature Sensor board with NTC Thermistor



VR IN 78 ZX -Temp NTC Thermistor




VR IN 77 ZX -01 Switch Touch Sensor


Description

touch sensor
use to touch sensor or
selection switch active
logic “0” led indicator suitable
supply voltage +3 to +5vdc



VR IN 77 ZX -01 Switch Touch Sensor




VR IN 76 ZX-SLIDE Variable Resistor Board


Description

VR IN 76 ZX-SLIDE Variable resistor board for distance measurement.



VR IN 76 ZX-SLIDE Variable Resistor Board




Variable Resistor Board For Angular Measurement


VR IN 74 ZX POTV Variable Resistor Board For Angular Measurement



Variable Resistor Board For Angular Measurement




Variable Resistor Board For Angular Measurement


Description

VR IN 73 ZX POTH Variable resistor board for angular measurement



Variable Resistor Board For Angular Measurement




VR IN 72 ZX-Photo Transistor


Description

VR IN 72 ZX-Photo Transistor

Photo Transistor board for sensing infrared light and candle light.



VR IN 72 ZX-Photo Transistor




VR IN 70 ZX-Reflector Light Reflector Sensor


Description

VR IN 70 ZX-Reflector Light reflector sensor



VR IN 70 ZX-Reflector Light Reflector Sensor




VR IN 69 ZX-02V Light Sensor


Description

VR IN 69 ZX-02 Light sensor
Cds Light Dependent Resistor detects the
ambient light Output is DC voltage. Dark is low
value and Bright is high value. Suitable supply
voltage +3 to 5Vdc



VR IN 69 ZX-02V Light Sensor




VR IN 65A GP2D120 IR Ranger


Description

the gp2d120 infrared sensor takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 4cm (1. 5") to 30cm (11. 8").

the interface is 3-wire with power, ground and the output voltage.

simply provide power and ground, and read a continuous analog voltage representing distance. A software lookup table can be implemented to translate the voltages to distances.



VR IN 65A GP2D120 IR Ranger




VR IN 61 SRF05 Ultarsonic Ranger


Description

Supply Voltage       : +5V
Low Current             : 4mA
Frequency                : 40 KHz Max
Range                       : 1cm to 4 m
Modes                       : Single pin for trigger/echo or 2 Pin separate trigger and echo pulse
Input Trigger             : 10mS Min
Level pulse               : Positive TTL level signal, width proportional to range.
Small Size                  : 43mm Width x 20mm Length x 17mm Height



VR IN 61 SRF05 Ultarsonic Ranger




VR In 65 GP2d12 IR Ranger


Description

The GP2D12 infrared sensor takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 10cm to 80cm .

The interface is 3-wire with power, ground and the output voltage.

Simply provide power and ground, and read a continuous analog voltage representing distance. A software lookup table can be implemented to translate the voltages to distances.



VR In 65 GP2d12 IR Ranger




VR IN 56 ZX Speaker


Description

VRr in 56 zx-speaker
drive sound to piezo speaker 32o suitable supply voltage +3 to 5vdc inex standard 3-pin pcb connector. Confort to includes a pcb3aa-8 cable use with inex controller boards.



VR IN 56 ZX Speaker




VR IN 51-ZX LED-Red


Description

VR IN 51-ZX LED 8 mm single LED driver board(red Color)



  • 10mm. Single LED


  • Active with logic “1” include driver on-board.


  • Suitable supply voltage +3 to 5Vdc


  • Interface with microcontroller and logic circuit.


  • INEX Standard 3-pin PCB connector.


  • Compatible with all INEX controller boards.


  • Pack of 5 LED Colors (Red/Green/Yellow/Blue/White)

  • Includes a PCB3AA-8 cables and Documentation
  • Also available in Yellow,Green,Orange,Blue colors



VR IN 51-ZX LED-Red




Sensor Module


Description:

  • Serial interface 1-signal pin

  • Can connect to serial port directly

  • Select 2 connection signal : direct & invert

  • select display 1 line or more

  • Select 2 baud rate 2400 or 9600 bps in 8-N-1 data format

  • Compatible Scott Edwards SLCD

  • Supply voltage 5-12V



Sensor Module






VR IN 75 ZX-Resistance Measurement Board

VR IN 75 ZX-Resistance Measurement Board



Send Enquiry

VR IN 68 ZX LED 2C Bi-color LED Output Board

VR IN 68 ZX LED 2C Bi-color LED Output Board



Send Enquiry





VR IN 67 ZX-IRM 38 K Hz Infrared Receiver Module Board

VR IN 67 ZX-IRM 38 K Hz Infrared Receiver Module Board



Send Enquiry

VR IN 66 ZX IRLED Infrared LED Output Board

VR IN 66 ZX IRLED Infrared LED Output Board



Send Enquiry







Contact Us

Macnet Technology
Mr. Ajit Vira (Manager)
No. 18, Shree Ganesh Bhuvan, Kalpana Building, Floor No. 357, Lamington Road, Grant Road East
Mumbai - 400007, Maharashtra, India

Contact via E-mail



Home  |   Profile  |  Our Product Range  |  Site Navigation  |   Contact Us

Member IndiaMART.com © Macnet Technology. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Contact Us

*Describe Your Requirements in Detail
Remaining Characters: 3500
Your Contact Information
Your Contact Information
*Name:
*Email:
Company:
Website:
*Country:

City:
*Mobile:
*Enter the code: