We manufacture laboratory oven (Memmert Type) with code MSW-11 with following features :

• These are sturdy double walled units with outer chamber made of M.S. Sheet duly powder coated.
• Inner chamber made up of S.S.Sheet (SS-304 grade).
• Beaded heating elements are placed in ribs, at bottom and sides.
• Inner chamber is provided with ribs for adjusting perforated shelves to convenient height.
• Synthetic door gasket made of neoprene rubber is fitted to all “MAC” units instead of asbestos.
• Air ventilators are also provided on the sides of the unit.
• To work on 220/230 volts A.C.

(A )Thermostatically Controlled : Temperature is controlled by hydraulic type capillary thermostat to control temperature from 50oC to 2500C+1°C. an L-shaped prismatic thermometer is fitted to the unit for reading the chamber temperature.

(B) Digitally Controlled : Temperature is controlled through a microprocessor based pid digitial temperature indicator-cum-controller or through a profile digital microcontroller having 4 programmes each of 16steps (total 64 steps of ramp/soak profile), from ambient to 2500C with an accuracy of +10C. All digitally controlled ovens are fitted with air circulation fan as a standard accessory.

INNER SIZE (W x D x H)	CAPACITY
300 x 300 x 300 m.m.	28 ltrs.
355 x 355 x 355 m.m.	45 ltrs.
455 x 455 x 455 m.m.	95 ltrs.
455 x 455 x 605 m.m.	125 ltrs.
605 x 605 x 605 m.m.	224 ltrs.
605 x 455 x 910 m.m.	252 ltrs.
505 x 605 x 910 m.m.	336 ltrs.

Optional Accessories

(a) These models can be fitted with RS-485  communication port for PC interphase and a RS-485 to RS-232 converter for logging the data to your personal computer for taking prints through a printer as and when desired.

We manufacture laboratory lyophilizer (Freeze Dryer) avialable with following code MSW-137. The features of laboratory lyophilizer are as under :

• Housed in a super structure steel frame it is mounted on swivel casters.
• Complete with erspex see through lid, gasket and control instruments i.e. microprocessor based digital temperature controller for measurement of temp. & electronic digital vacuum indicator.
• The  unit  made  out  of  hermetically sealed compressor and with 100  liters/ min direct  motor  drive  rotary  vane  type  vacuum  pump  of  double  stage  with  Air  ballast  having  ultimate  vacuum  of 1x10-3 torr on pump head.
• Condenser Trap:  All  non-magnetic  stainless  steel  fabricated, argon  welded,  dished-bottom  for  complete  effluent  removal.
• Refrigeration coils made of copper bonded to outside of condenser heavily insulated. temp.  up to
• (-)400 C at ambient temperature of 200 C is  maintained through a microprocessor based digital temperature indicator.
  
• Vacuum Drum has 6 or 12 port  manifold (Main drying chamber)  made of stainless steel non-magnetic grade with Perspex  top cover. (CFC free and puf insulatted)

(a)    Capacity 3.25 liters approximately (for 6 tests)  (with Digital Vacuum Indicator AND Transducer)   
       
(b)    Capacity 5.25 liters approximately (for 12 tests) (with Digital Vacuum Indicator AND Transducer)
       
Optional Accessories

• Secondary drying unit   
• Pre-freezing attachment   
• Heat Rack with 2/3 individually heated racks for accelerated freeze drying of small samples in bulk (Tray, Petri Dishes, and Beakers etc.). Adoptable to main drying chamber   
• Automatic Voltage Stabilizer cap. 5.00 KVA

We manufacture vertical autoclave (Deluxe Model) with model MSW-101.

• Used for sterilization under saturated steam pressure at any selected point between 15 to 22 p.s.i. (adjustable).
• These double walled units have inner chamber (Boiler) made of 18 S.W.G. stainless steel (SS-304 grade).
• Outer wall is covered with stainless steel sheet.
• Thick stainless steel lid is tightened by radial locking system and can be lifted through a pedal lifting device for user comfort
• Fitted with jointless neoprene rubber gasket.
• Systems are hydraulically tested upto 40 p.s.i., as a safety measure.
• All autoclaves are fitted with standard accessories such as water indicator, pressure gauge, steam release cock, spring loaded safety valve, pedal lifting device and heating element.
• Space between boiler and outer shell works as an air insulation.
• Supplied complete with S.S. basket, cord and plug.
• Supplied with cord and plug to work on 220/230 volts A.C. Supply.
• All deluxe models besides being fitted with stainless steel lid and having inner chamber made of S.S. and outer chamber covered with Stainless Steel are also fitted with vacuum breaker -cum-purge valve as a safety device.
  

DIA x HEIGHT	CAPACITY	LOAD
250 x 450 m.m.	22 ltrs	2.0 KW
300 x 500 m.m.	40 ltrs	2.0 KW
350 x 550 m.m.	50 ltrs	3.0 KW
400 x 600 m.m.	78 ltrs	4.0 KW
450 x 600 m.m.	98 ltrs	4.0 KW
550 x 750 m.m.	152ltrs	4.0 KW

Optional Accessories

• Automatic Pressure Control Switch (AUTOMATIC INDFOSS PIEZOSTAT)
• Automatic low water level cut- off device (for general safety of the element)
• Solid State Digital Temperature Indicator to cost extra
• Solid State Digital Temperature CONTROLLER with DIGITAL TIMER (in leiu of analogue controls) can be fitted and when the set temperature range corresponding to the desired pressure is attained the timer starts automatically. On completion of set time/sterilization period an audio alarm is raised in order to alert the operator.
• Analogue 0-60 minutes ON/OFF mechanical timer.
• Digital ON/OFF mechanical timer
• Spare Heating Element

Rotary shaker are heavy duty shakers are for applications demanding continuous operations.available with code MSW-302.

• Heavy duty shakers are for applications demanding continuous operations.
• Supplied with stainless steel platform with lotus clamps holding erlenmeyer flasks.
• Fitted with pmdc heavy duty continuoud rating motor.
  
• Speed is controlled through a SMPS based DC drive unit by a speed control knob or through a variac (auto transformer).
• Speed range is from 50 to 250rpm (approx).
• Fitted with Digital RPM/speed meter.
• Any one set of lotus clamp for the above configuration is supplied with the above unit.
• Additional set of lotus clamps are also available at extra cost.
• Fitted with DIGITAL ON/OFF timer for shaking time control.
• To work on 220Volts A.C. supply.

PLATFORM SIZE	FLASK HOLDING CAPACITY
	1000 ml	500 ml	250 ml	150 ml	100ml/50
24" X 24"	16	25	36	49	64
36" X 36"	36	49	64	81	100
48" X 48"	81	100	121	144	169

We manufacture bacteriological incubator (Memmert Type) with code MSW-231 with following features :

• Sturdy double walled construction.
• Outer chamber made of M.S. Sheet duly enamel painted.
• Inner chamber made up of S.S.Sheet (SS-304 grade).
• The gap between inner and outer chamber is filled with high-grade glass wool to avoid thermal losses. 
• Beaded heating elements are placed in ribs, at bottom and sides. 
• Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. 
• Door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature.
• Synthetic rubber gasket made of neoprene rubber is fitted to all "MAC" units instead of asbestos.
• Air ventilators are also provided on the sides of unit.
• To work on 220 / 230 volts A.C.supply.

(A) Thermostatically Controlled : Temperature is controlled by hydraulic type capillary thermostat to control temperature from ambient to 700C+1°C. An L-shaped prismatic thermometer is fitted to the unit for reading the chamber temperature.

(B) Digitally Controlled : Temperature is controlled through a microprocessor based pid digital temperature indicator cum-controller or through a profile digital microcontroller having 4 programmes each of 16steps (total 64 steps of ramp/soak profile), from ambient to 700C with an accuracy of +10C. All digitally controlled ovens are fitted with air circulation fan as a standard accessory.

INNER SIZE (W x D x H)	CAPACITY
300 x 300 x 300 m.m.	28 ltrs.
355 x 355 x 355 m.m.	45 ltrs.
455 x 455 x 455 m.m.	95 ltrs.
455 x 455 x 605 m.m.	125 ltrs.
605 x 605 x 605 m.m.	224 ltrs.
605 x 455 x 910 m.m.	252 ltrs.
605 x 605 x 910 m.m.	336 ltrs.

Optional Accessories

(A) These models can be fitted with RS-485 communication port for pc interphase and a RS-485 to RS-232 converter for logging the data to your personal computer for taking prints through a printer as and when desired.

We manufacture B.O.D incubator (Low Temperatute) with code MSW-121 and with following features :

• Most versatile for Biochemical Oxygen Demand determinations.
• Castor wheel mounted cabinet is double walled with inner chamber and storage shelves of stainless steel (SS-304 grade) and outer wall of M.S. Sheet duly powder coated.
• Triple walled back of the unit is fitted with two air circulation fans for maintaining temperature uniformity throughout the chamber.
• Full view inner glass door permits inspection of specimens, without disturbing the same.
• Lock and key arrangement is provided in the double walled outer door.
• Unit is fitted with door operated illumination lamp inside the chamber.
• Supplied complete with adjustable shelves, cord and plug.
• Finned tube evaporator.
• The temperature range is from 50C to 500C ±0.50C
• Temperature is controlled by microprocessor  based  digital temperature indicator-cum-controller or through a profile digital microcontroller having 4 programmes each of 16steps (total 64 steps of ramp/soak profile), with an accuracy of ± 0.50C.
• CFC free eco friendly compressor.
• Supplied with recommended three step sutomatic voltage stabilizer.
• To work on 220 / 230 Volts A.C.  supply.

SIZE (W x D x H )	VOLUME	CAPACITY
405 x 405 x 405 m.m.	2.4 Cuft	65 ltrs.
(Bench Top Model)
455 x 410 x 610 m.m.	4.0 Cuft	112 ltrs.
505 x 415 x 830 m.m.	6.1 Cuft	171 ltrs.
570 x 550 x 875 m.m.	10.0 Cuft	280 ltrs.
650 x 580 x 900 m.m.	12.0 Cuft	336 ltrs.
700 x 640 x 900 m.m.	15.0 Cuft	420 ltrs.

Optional Accessories

• Interior illumination with 3 nos. fluorescent tubes (temp. 10° to 50°C)
• Automatic cyclic timer 0-24 hrs. for regulating illumination cycle
• Arrangement for incubation of CO2/Air mixture
• Carbon Dioxide Cylinder (10 ltrs. Capacity)
• Shaking machine to be fitted inside the chamber
• Humidity control arrangement. 55% to 95% ± 3% RH with digital humidity controller
• These models can be fitted with RS-485 COMMUNICATION PORT for PC INTERPHASE and a RS-485 to RS-232 CONVERTER for LOGGING the DATA to your PERSONAL COMPUTER for taking prints through a printer as and when desired.

We offer orbital shaking incubator cum B.O.D. incubator with following code MSW-132. The features of orbital shaking incubator are as under :

• The outer chamber is made up of M.S. Sheet duly painted and inner chamber of thick S.S. Sheet.
• The plexi glass window makes it possible to inspect the specimen without disturbing the inner temperature.
• The unit is fitted with fluorescent tubes of 60 cms, Length, on the inner side.
• Finned tube evaporator.
• The unit has a temperature range from 50 C to 600 C and is controlled with microprocessor based pid digital temperature indicator-cum-controller with an accuracy of ± 0.50c or through a profile digital microcontroller having 4 programmes each of 16steps (total 64 steps of ramp/soak profile).
• When the tube lights are on temperature range is from 100C to 500C.
• Air circulation fan is fitted to maintain temperature uniformity throughout.
• Cyclic illumination conditions are controlled by a microprocessor based cyclic timer fitted to the unit.
• It is fitted with digital speed meter (RPM counter) for shaking platform having variable speed from 50 to 250 rpm or 30-300 rpm (as ordered).
• The unit is supplied with any one platform  containing  25  flasks  of  250ml or 16 flasks of 500ml or 40 flasks of 100 ml or 34 flasks of 150 ml  or 9 flask of 100ml capacity, as  standard  accessory.
• CFC free eco friendly compressor
  
• Supplied with three step autmatic voltage stabilizer size : 660mm (W) x660mm (D) x 610mm(H)
• To work on 220/230 volts A.C. supply.

(a)    SPEED RANGE 50-250rpm       
(b)    SPEED RANGE 30-300rpm
       
Optionla Accessories

• Spare set of lotus clamps made of S.S.   
• Built in U.V. germicidal tube light     
• These models can be fitted with RS-485 communication port for PC interphase and a RS-485 to RS-232 converter for logging the data to your personal computer for taking prints through a printer as and when desired.

We manufacture horizontal high pressure cylindrical steam sterilizer with code MSW-104 with following features :

• The inner chamber, steam jacket, outer chamber and boiler are made of heavy gauge stainless steel with leak proof argon arc welding.
• The radial locking lid is made of thick S.S.plate.
• All units are hydraulically tested upto 40psi.
• The space between the outer chamber and steam jacket is filled with asbestos sheet or glass wool to minimize thermal losses.
• Steam boiler is fitted with water level indicator, pressure gauge, low water cut-off device and automatic pressure control device.
• Fitted with a Digital Temperature Indicator to indicate inner temperature.
• Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation.
• The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.
• The unit is provided with a positive self-locking safety door which cannot be opened while the chamber is under pressure and disengages automatically when chamber is exhausted. This affords complete safety to the working personnel against explosive opening.
• Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired.
• Sterilization Cycle is controlled by single point multiport valve.
• The unit is fitted with all standard accessories such as Automatic Pressure Control Switch and Automatic Low Water Cut-Off Device.
• To work on 440 volts, 3 phase supply.

DIA x DEPTH	CAPACITY	LOAD
400 x 600 m.m.	88 ltrs.	6.0 KW
400 x 1100 m.m.	162 ltrs.	9.0 KW
500 x 900 m.m.	165 ltrs.	9.0 KW
500 x 1200 m.m.	221 ltrs.	9.0 KW

Optionla Accessories

• Solid state digital temperature controller with digital timer (in lieu of analogue controls) can be fitted and when the set temperature range is attained the timer starts automatically. On completion of set time/sterilization period an audio alarm is raised in order to alert the operator

We manufacture horizontal laminar flow cabinet with model no. MSW-161. Features of laminar flow cabinet are as under :

• Designed  so  as   to  meet  the  requirements of US Federal  Standard  209 B (BS 5295)  providing  particle  free  air  to  meet  class 100 (Class conditions).
• Cabinets is fabricated out of thick board duly sunmica clad. 
• Interior surfaces are epoxy painted for its longer life. 
• Working table is made of thick board with Stainless Steel clad at top. 
• Side panels are made out of thick transparent plexi glass.
• Unit is fitted with Pre-filter and HEPA Filter.
• Air is drawn  through  pre-filter  and  is  made  to  pass  through  highly  effective  HEPA  (High  Efficiency  Particular  Air)  filters  having  efficiency  rating  as  high   as  99.99%  with  cold  DOP  and  99.97%  with  hot  DOP, thus  retaining  all  air-borne particles  of  size  0.3  micron  and  larger.
• Using a dynamic  machine,  the  blower  and  motor  assembly is  statically & dynamically  balanced.
• Motor of 1/5 H.P. capacity operates with minimum noise level.
• Working area is illuminated by fluorescent lighting fitted to the unit.
• Supplied complete with static finish S.S. table top, transparent front door (5 m.m.), static pressure manometer, built in U.V. germicidal light and cock for gas, air or vacuum line, HEPA filters and pre-filter.
• To work on 220/230 volts A.C. supply.
• Whole Cabinet made of wooden board laminated with sumica, cold rolled steel duly power coated and stainless steel
  

Model.	LH-22	LH-32	LH-42	LH-62	LH-82
Working Size	2' x 2' x 2'	3' x 2' x 2'	4' x 2' x 2'	6' x 2' x 2	8' x 2' x 2'
Size of HEPA Filter	2' x 2' x 6"	3' x 2' x 6"	4' x 2' x 6"	3' x 2' x 6"	4' x 2' x 6”
No. of HEPA Filter	1	1	1	2	2
Illumination	1 x 20 W	1 x 20 W	2 x 40 W	2 x 40 W	4 x 40 W

Optional Accessories

• Front door made of transparent polycarbonate sheet in lieu of plexi-glass to cost extra
• Spare HEPA filters
• Spare pre-filter.

We manufacture seed germinator (Dual Chamber) with following code MSW-124. The features of seed germinator are as under :

• These double walled units have inner chamber made of Stainless Steel (S.S.-304grade) and outer chamber of M.S. Sheet duly painted.
• Temperature from 5oC to 50oC ± 1oC is controlled by microprocessor based pid digital temp. indicator-cum-controller or through a profile digital microcontroller having 4 PROGRAMMES each of 16steps (total 64 steps of ramp/soak profile).
• Humidity (NOT ADJUSTABLE) is created in a S.S. water reservoir fitted at the bottom to provide 90% to 95% ±3% RH.
• Finned tube evaporator
• Supplied complete with 14 adjustable perforated trays made of Stainless Steel.
• CFC free eco friendly compresspor.
  
• All units are provided with exterior illumination arrangement total 6Nos. of fluorescent tubes (3Nos. on each side).
• Cyclic illumination condition is controlled through a 0-24 hour programmable timer
• Supplied with three step automatic voltage stabilizer.
  
• Complete with cord and plug to work on 220/230 V A.C. with dual chamber having following parameters:

A) One chamber can control temperature from ambient to 50^oC ± 1^oC and other chamber is fitted with compressor so as to maintain temperature from 5^oC to 50^o ± 1^oC.
INSIDE SIZE OF EACH CHAMBER CAPACITY
(W x D x H)
555 m.m. x 605 m.m. x 910 m.m. 308 ltrs

(B) -do-same as above but fitted with heating and cooling system in both the chamber, so as to control temperature from 5^oC to 50^oC ± 1^oC in both chambers (Supplied with 14 trays ) (Cooling in Both Chambers)

INSIDE SIZE OF EACH CHAMBER(W x D x H)	CAPACITY
555 m.m. x 605 m.m. x 910 m.m.	308 ltrs.

Optional Accessories

• Humidity control arrangement. 55% to 95%± 3% RH with Digital Humidity Controller (for each chamber)
• These models can be fitted with RS-485 communication port for PC interphase and a RS-485 to RS-232 converter for logging the data to your personal computer for taking prints through a printer as and when desired.

We manufacture plant growth chamber with model no.MSW-130. The features of plant growth chamber are as follows :

• It has outer wall made of M.S. Sheet duly painted and inner wall made up of heavy gauge S.S.  Sheet (S.S. 304 Grade).
• Besides outer double walled door, a full view inner glass door allows inspection of test samples without disturbing the inner chamber conditions. 
• Unit is supplied with three adjustable perforated shelves.
• Finned tube evaporator.
• Temperature range from  5° C to  50° C ±  1° C is controlled  by  dual setting microprocessor based digital temperature indicator-cum-controller so as to  set  two  different  temperatures  for  day  and night or through a profile digital micro controller having 4 programmes each of 16steps (total 64 steps of ramp/soak profile).
• Exterior illumination with fluorescent tubes accounts for artificial day light.
• Cyclic illumination conditions are regulated by automatic Microprocessor based programmable Timer. 
• When  all  the  tubes  are  ON  temperature  from  15° C  to  50° C  ±  1° C  can be  obtained.
• Fitted with microprocessor based digital humidity indicator- cum - controller to control humidity from 55% to 95% at cool temperatures. Light intensity can be adjusted manually  according to requirements.
• Arrangements  for  increasing  the  humidity  is  provided  and  not  for  decreasing.
• CFC free eco friendly compressor
  
• Supplied with three step automatic voltage stabilizer
  
• To work on 220/230 volts A.C.

SIZE (W x H x D )	VOLUME	CAPACITY
570 x 875 x 550 m.m.	10 Cuft	280 ltrs.
650 x 900 x 550 m.m.	12 Cuft	336 ltrs.
700 x 900 x 650 m.m.	15 Cuft	420 ltrs.
775 x 900 x 775 m.m.	20 Cuft	560 ltrs.
825 x 1200 x 825 m.m.	30 Cuft	840 ltrs.
900 x 1720 x 800 m.m.	45 Cuft	1260 ltrs.

Optional Accessories

• These models can be fitted with RS-485 communication port (for temperature) for PC interphase and a RS-485 to RS-232 converter  for logging the data to your PERSONAL COMPUTER for taking prints through a printer as and when desired.

We manufacture laboratory water bath rectangular (Double Walled) with model no.MSW-272. The features of laboratory water bath are as follows :

• Double walled construction.
• Inner chamber made of Stainless Steel (SS-304 grade).
• Outer wall made of M.S.  sheet duly  powder coated. 
• Gap  between  outer  and  inner  walls  is  fitted  with  special  grade  glass  wool  insulation.
• Concentric  rings  can  be  removed  to  accommodate  containers  of  various  sizes.

(A)  Thermostatically Controlled : Temperature from few degree above ambient  to  100°C + 0.5°C is controlled  by hydraulic type “EGO”/ “JUMO” german  thermostat.

(B)  Digitally Controlled : Fitted with microprocessor based PID temperature indicator  cum  controllor or a profile digital microcontroller having 4 programmes each of 16steps (total 64 steps of ramp/soak profile) in lieu of hydraulic type thermostat. All digitally controlled units are fitted with a FHP stirrer as a standard feature.

SIZE: (L) X (W) X (D)	CAPACITY
300 x 250 x 100 m.m. (6 Holes of 75 m.m. dia)	8 liters
355 x 405 x 100 m.m. (12 Holes of 75 m.m. Dia)	15 liters