Brake Parts

Magpower linksys are manufacturers of clutches and brakes which are intended for start-stop applications. They come in various types to meet different requirements.


Type FSB : Magpower spring applied brakes type fsb are typical fail safe brakes. Its braking torque is produced by spring pressure and the brake is released electromagnetically. When there is no current flowing through the brake coil, the fail safe operation of the brake is derived from the braking torque generated by the spring pressure. When current flows through the brake coil, the spring pressure is neutralized by the developed electromagnetic force, which enables the brake to be released.

They are suitable for dry applications only.  These brakes are thus safety brakes coming into, action in the event of a power failure, arresting motion instantaneously.

Features :

• Magpower spring applied fail safe brakes incorporate a telescopic tubular wear adjustment system which facilitates easy maintenance. Alternatively, these brakes can also be provided with spacers, wherein the air gap is preset and can be initially mounted without any adjustment.
• Individual spring pressure adjustment permits precise setting of braking moment.
• A low level of wear owing to the use of an abrasion resistant friction material and a large friction area.
• Manual release is provided as an additional features which enables the brake to be released mechanically, in case of power failure.
• The brake have short switching time and operate in milliseconds.
• Seals are provided to prevent the ingress of foreign matter, thus ensuring a long life and smooth functioning of the brake.

Ordering Information

• Type, size, d. C. Voltage, bore diameter, design.

Example of Order

• Ttype : fsb, size : 08, 24 vdc, bore diameter – 11mm, design 104

For selecting the correct size of the brake, the factors to be considered are :

• Max. Reqd. Braking torque.
• Freq. Of operations.
• Max. Thermal load.

The reqd. Braking torque can be calculated using the formula :

• M= (9550 p/n). S (nm)
• M= reqd. Static torque (nm)
• P= power rating of prime mover in kw
• N= rev / min
• S= service factor depending on application (1. 5 to 4. 0)
• For switching details and complicated calculations, please get in touch with us.

Magpower spring applied fail safe brakes require d. C. Supply.

 

Product Line

• Electromagnetic single face brakes (normally off) – type eb
• Electromagnetic single face clutch – type ec
• Electromagnetic single face bearing mounted clutch – type bmc
• Clutch – brake combination encased – type cbe
• Clutch – brake combination open – type cbo
• Single shaft double clutch unit – type ssdc
• Single shaft clutch brake unit – type sscb
• Hollow shaft clutch brake unit – type hscbe
• A. C. Fail safe brake – type afs

"To view dimensions click on the download pdf button"
 

Magpower Linksys are manufacturers of Clutches and Brakes which are intended for Start-Stop applications. They come in various types to meet different requirements.

Type EB : Magpower Electromagnetic Single Face Brake Type EB is a “Normally Off” Type Brake. It has 2 basic parts. The stator which consists of a coil and friction material, and the Armature plate. The braking torque is produced by means of the electromagnetic force which is developed when the current flows through the brake coil, thus attracting the Armature plate to the stator with friction material, thereby arresting the motion and is released immediately due to a sinusoidal wave spring, when no current is passing through the coil.


These brakes are used for Dry Applications only.

Features :

• These brakes are designed for simple mounting and easily adaptable to any mounting requirement as it is manufactured in varied designs.
• The sinusoidal wave spring enables a backlash free transmission, enabling very short response time on disengagement.
• The friction faces are completely separated by the Spring eliminating any drag and permitting use at very high idling speeds.
• These units are practically maintenance free due to the Stationary Coil and Highly Wear Resistant friction surfaces.

Ordering Information

• Type, Size, D.C. Voltage, Design.
• Armature Bore Diameter
• Armature Bore Diameter is not applicable for Design 100.

Example of Order

• Type : EB, Size : 08, 24 VDC, Design: 101, Armature Bore Diameter – 14 mm.

For selecting the correct size of the brake, the factors to be considered are :

• Max. reqd. braking torque.
• Freq. Of operations.
• Max. thermal load.

The reqd. braking torque can be calculated using the formula :

• M = (9550 p/n). s (Nm)
• M = Reqd. Static torque (Nm)
• p = Power rating of prime mover in KW
• n = Rev / Min
• s = Service factor depending on application (1.5 to 4.0)
• For switching details and complicated calculations, please get in touch with us.

• Spring Applied Fail Safe Brake – Type FSB
• Electromagnetic Single Face Brakes (Normally Off) – Type EC
• Electromagnetic Single Face Bearing Mounted Clutch – Type BMC
• Clutch – Brake Combination Open – Type CBO
• Clutch – Brake Combination Encased – Type CBE
• Single Shaft Double Clutch Unit – Type SSDC
• Single Shaft Clutch Brake Unit – Type SSCB
• Hollow Shaft Clutch Brake Unit – Type HSCBE
• A.C. Fail Safe Brake – Type AFS

"To view Dimensions click on the download PDF button"
 

Magpower Linksys are manufacturers of Clutches and Brakes which are intended for Start-Stop applications. They come in various types to meet different requirements.

Type CBE : The Encased Clutch-Brake Combination Type CBE assembly embody Magpower Normally Off type Clutch and Brake. These units are robust and compact in construction and fully enclosed protecting the clutch and brake from dust and dirt. The armature arrangement is a duplex disc type on a common spline hub, which moves axially along the spline hub, thus self compensating for wear and resultant maintains its operating characteristics.


These Clutch-Brakes Combination are available in various designs to permit use in all applications.

Features :

• These are available in Foot Mounted and Shaft Mounted Models. These units are pre- assembled, convenient packages for mounting directly.
• The duplex disc type armature arrangement enables the unit to be used for high cyclic operations.
• Air gap adjustments can be done without dismantling the unit.
• The components incorporated in the unit enables a backlash free torque transmission.

Ordering Information

• Type, Size, D.C. Voltage

Example of Order

• Type : CBE, Size : 08, 24 VDC

 For selecting the correct size of the clutch-brake combination, the factors to be considered are :

• Max. reqd. static torque.
• Freq. Of operations.
• Max. thermal load.

The reqd. static torque can be calculated using the formula :

• M = (9550 p/n). s (Nm)
• M = Reqd. Static torque (Nm)
• p = Power rating of prime mover in KW
• n = Rev / Min
• s = Service factor depending on application (1.5 to 4.0)

For switching details and complicated calculations, please get in touch with us. Magpower Clutch-Brake combination Type CBE require D.C. Supply.

Product Line

• Spring Applied Fail Safe Brake – Type FSB
• Electromagnetic Single Face Brakes (Normally Off) – Type EB
• Electromagnetic Single Face Clutch – Type EC
• Electromagnetic Single Face Bearing Mounted Clutch – Type BMC
• Clutch – Brake Combination Open – Type CBO
• Single Shaft Double Clutch Unit – Type SSDC
• Single Shaft Clutch Brake Unit – Type SSCB
• Hollow Shaft Clutch Brake Unit – Type HSCBE
• A.C. Fail Safe Brake – Type AFS

"To view Dimensions click on the download PDF button"