process has wide brightness range, spl at extreme low current density area
for plating on zinc diecasting, steel alu. Etc.
has a wide useful operating range, so the solution control is very easy.
the bath can be operated at wide bath temperature range 20 - 35 o c.
good brightness and levelling.
good throwing power.
2
marwell 1180 process
gcid copper salt for preparation & maintenance of bath.
copper salt 1181
acid copper salt for preparation & maintenance of bath.
3
cu-star-1190
bright acid copper plating process, is the finest acid copper plating system for decorative plating with best lcd coverage, best leveling and excellent gloss. It is suitable for manual, rack and barrel and automatic or continuous wire/ strip plating plant.
4
cu star-1190
(economic process): - do- with higher consumption rate.
supplied in powder form, which replaces hazardous hydrofluoric acid and hence easy to handle.
added to the acid dip prior to plating to remove siliceous film and thus ensured adherent haze free deposits.
also used as an additive to sulphuric, nitric pickling baths & smut removal for alu. Alloys, stainless steel & titanium.
2
mahapick 30
a dry acid salt used for making acid dips for removal of silicate & oxide films from ferrous and non ferrous metals to get better adhesion of subsequent electrodeposits.
3
acid inhibitor
an excellent inhibitor specially dev. For hydrochloric acid, sulphuric acid pickling bath for steel to reduce the base metal attack during pickling. Suitable before nickel plating.
4
acid inhibitor spl
an excellent inhibitor specially dev. For hydrochloric acid, sulphuric acid pickling bath for steel to reduce the base metal attack during pickling. Suitable before nickel plating.
5
mahatak (pickle aid) accelerat0r222
aids in improving the tough scale in pickling bath.
6
mahatek mz
brightening dip for mazak based components.
zinc diecasting parts are brightened without attacking the base metals
smoothens the component & thus can produce glossy finish.
* a non-silicate. Mildly alkaline soak cleaner used for either non-etch or mild etch cleaning.
* ideal for the non-etch cleaning of aluminum prior to anodizing, chrometing bright dipping and electroplating.
2
Mahaline - 042
* an alkaline etching product suitable for all aluminum alloys producing as ultra fine etch on aluminum.
3
Mahaline 0204
* an unique alkaline product which produce an ultra fine etch on aluminum to a satin bright finish. Serves as a low cost substitute for chemical polishing.
4
Maha cid al-15
* an acid concentrate specially designed for immersion or spray cleaning of alu. Or its alloys.
* avoids the stains as the results of the alkaline clearing drag-out
* improves the paint adherence and increases the corrosion resistance.
5
Alumax smoothening additive
* a liq. Alkaline add. To aluminum etchant, used as pickling admixture to give uniform surface of aluminum & its alloys.
* prevents formation of scales on tank surfaces and heating elements.
6
Maha-al 'non-ppt' agent
* used as a precipitation preventing agent in alkaline baths & degreasers.
* prevents the formation of petrous deposits by preventing the hydrolysis of sodium aluminum.
* a bright highly stable electroless nl. Sys. Designed to produce hard, corrosion resistance coating having phosphorus content in excess of 7% by weight.
2
minplate ni 618 a
* component of minplate nl 618 process
3
minplate ni 618 b
* component of minplate nl 618 process
4
minplate ni 618 c
* component of minplate nl 618 process
5
minplate ni (al) 620 al process
* minplate al 620 is an electroless nickel strike bath for processing alu. Prior to electroless nl. Or electrolytic nl. Plating.
* for make up 620a & 620b are used & 620a & 620c for replenishment.
A UNIQUE PROD. DEVD. AT MAHAVIR FOR THE MKT. REQ. OF Nl. FREE SILVERY WHITE FINISH.
EXCELLENT RESULT OVER BRASS, COPPER BASE METAL DIRECTLY, SUPERB FINISH OVER Nl. & STAIN Nl. PLATING ON WATCH CASES, BALL PEN, KEY CHAIN, BELTS & HARD WARE ITEMS.
CAN BE USED AS AN ALTERNATE OF TIN PLATING AS DEPOSIT HAS VERY GOOD SOLDERING PROPERTY, CAN BE USED FOR PCB.'S ALSO.
2
BLACK BRONZE
A UNIQUE PRODUCT DEVELOPED AT MAHAVIR FOR THE MARKET REQUIREMENT FOR NICKEL FREE ANTIQUE BLACK FINISH. THE DEPOSITS ARE HAVING VERY GOOD ANTITARNISHING PROPERTIES.
3
YELLOW BRONZE
A UNIQUE PRODUCT DEVELOPED AT MAHAVIR FOR THE MARKET REQUIREMENT FOR NICKEL FREE YELLOW FINISH, CAN BE USED AS UNDERCOAT OF GOLD PLATING TO INCREASE THE LIFE OF UPPERCOAT OF FLASH GOLD, THE DEPOSITS ARE HAVING VERY GOOD ANTITARNISHING PROPERTIES.
* AN IMPROVED BASE LACQUER FORMULATION TO ENHANCE CORROSION RESISTANCE OF ZINC PLATED PARTS.
2
MAHAGUARD 902
* A WATER BASE LACQUER USED PRIMARILY FOR COPPER, BRASS AND ZINC PLATED PARTS.
* DILUTABLE WITH ISOPROPANOL TO REDUCE OPERATING COST.
3
MAHAGUARD 905
* ADVANCED WATER BASE LACQUER CONTAINING UNIFORM DISPERSION OF POLYMERS AND SPL. RECOMMENDED FOR PROTECTION OF ZINC PLATED COMPONENTS & OTHER APPLICATIONS.
High performance bright silver bath based on fully organic addition agent system to product bright silver deposit on a wide current density range.
* mainly used for electrical (switch gear) and electronic components.
2
Bright silver salt 801 process
* component of silver 800 process
3
Star bright silver process
* bright silver system based on fully organic addition agents to produce mirror bright silver deposits having a pleasing white color and good antitarnishing properties.
* designed for plating silver jewelry articles, table ware, cutlery, etc. ,
* silver on silver applications.
4
Star bright silver salt
* component of star bright silver process
5
Star bright silver additive a
* component of star bright silver process
6
Star bright silver Brightner b
* component of star bright silver process
7
Silver strike salt 810
* strike bath prior to bright silver platins
8
Silvo high speed silver process
Designed for continuous plating of wire, strips, etc. ,
Can deposit 5 microns per minute at 10 a/dm 2
9
Silvo silver salt
Designed for continuous plating of wire, strips, etc. ,
Can deposit 5 microns per minute at 10 a/dm 2
10
Silvo carrier additive
Designed for continuous plating of wire, strips, etc. ,
Can deposit 5 microns per minute at 10 a/dm 2
11
Silvo brightner
Designed for continuous plating of wire, strips, etc. ,
Mahavir's Nickel Sulphate is a premium-grade salt derived from virgin nickel metal, it is produced under strictest process control to ensure the best and consistent quality needed in the electrolytic or electroless nickel plating processes and for manufacturing of nickel catalyst and chemicals.
Due to its controlled crystal size & type, it provides the user with optimum performance. It dissolves rapidly, smoothly & with minimum dusting problems.
Mahavir's Nickel Sulphate is most preferred product by users for general as well as electroless electroplating electroforming and nickel catalyst manufacturers.
Specifications:
Molar weight ni s04 6h20 = 262. 8
Stoechiometric nickel content = 22. 3%
Crystalline system : free flowing
Emeralad green rhombic crystals
Transformation Temperatures:
Dehydrates at 103° c
Decomposes at 764° c
Density: 1. 98 g/cm3
Bulk density 1. 24 g/cm3 (uncompacted)
Solubility at 25° c 158 gm/ltr. In water
Application:
General electroplating
Electroless nickel plating
Catalyst manufacturing
Nickel based chemical manufacturing
Storage Conditions:
Mahavir's Nickel Sulphate is a crystalline salt-containing 6 molecules of water. Although it keeps in excellent condition during storage, it is necessary to take certain precautions to prevent a change in physical appearance which may be caused by variations in temperature, humidity or sunlight, such as setting in bulk, deliquescence or change in colour, it should be stored in dry place and protected from strong heat and sunlight.
however in such cases where physical appearance may have changed, the chemical properties of the product remain unchanged.
Quality Control:
Constant and strict control for quality during production is maintained by mahavir's laboratories. Each lot is in variably analysed at all the stages. This ensures the highest quality on which mahavir's reputation is based.
Precautions during use:
Mishandling of nickel sulphate or its solutions may cause eye or skin irritation. In case of contamination of skin, wash with plenty of soap & water, in case of eye contact rinse with abundant water for 10 to 15 minutes and consult a doctor.
Packaging Details:
MAHAVIR'S Nickel Sulphate is packed in 25 kg HDPE, Woven Sacks with tough, humidity, resistant polythene lined bags. They are also supplied in pallets of 40 bags (1 Tonne) protected by P/P Sheet Wraping It is also available in vaccume pack HM-HDPE Bag.
We offer a pure composition of nickel carbonate. Accurate PH value and non toxic, our range of nickel carbonate is widely demanded across various industries such as chemical, pharmaceutical, drug and several others. Its composition can be altered as per the requirements of our clients.
Some of the features of nickel carbonate is as follows:
Mahavir's Nickel Chloride is a premium-grade salt derived from virgin nickel metal, it is produced under strictest process control to ensure the best & consistent quality needed in the electrolytic or electroless plating processes & for fungicidal use in tea plantations.
Due to its controlled crystal size & type, it provides the user with optimum performance. It dissolves rapidly, smoothly & with minimum dusting problems.
Mahavir's nickel chloride is most preferred product by electroplaters for general as well as electroioss plating lines and nickel based chemical manufacturers. Specifications:
Molarweightnicl26h20= 237. 71
Stoechiometric nickel content = 24. 7%
Crystalline system : prismatic monocinic
Yellowish green free flowing crystals
Transformation Temperatures :-
Dehydrates: at 103° c
Decomposes: at 973° c
Density: 1. 92 g/cm3
Bulk density (uncompacted) approx 1. 00 g/cm3
Solubility at 20° c 2135 g/ltr. At80°c 5878 g/ltr.
pH of 5% aqueous solution = 3. 5
Applications:
General electroplating
Electroless nickel plating
Fungicidal in tea gardens
Misc. Chemical dyes & intermediates
Storage Conditions:
Mahavir's Nickel Chloride is a crystallised salt-containing 6 water molecules. Although it keeps in excellent condition during storage, it is necessary to take certain precautions to prevent a change in physical appearance which may be caused by variations in temperature, humidity or sunlight, such as setting in bulk, deliquescence or change in colour, it should be stored in dry place and protected from strong heat and sunlight. However in such cases where physical appearance may have changed, the chemical properties of the product remain unchanged.
Quality Control:
Constant and strict control for quality during production is maintained by mahavir's laboratories. Each lot is in variably analysed at all the stages. This ensures the highest quality on which mahavir's reputation is based. Precautions During Use:
Mishandling of nickel chloride or its solutions may cause eye or skin irritation. In case of contamination of skin, wash with plenty of soap & water, incase of eye contact rinse with abundant water for 10 to. 15 minutes and consult a doctor.
Packaging Details:
MAHAVIR'S Nickel Chloride is packed in 25 kg Vaccume pack HDPE, strong humidity, resistant bags. It is also supplied in pallets of 40 bags (1 Tonne) protected by cardboard.
Non-Nickel composition eliminates, nickel itch or nickel allergy problems. The process is intended for decorative applications involving contact with the skin especially
excellent covering power with a bright, uniform, silvery white color, we may call it an artificial silver coating or white rhodium coating
Suitable for barrel, vibratory, or rack plating
Porosity is much less than nickel for electrodeposits with a 5 micron deposit being virtually pore free. The deposit remains bright at thickness up to 50 micron
May eliminate duplex/ tri-nickel for excellent corrosion resistance and highest salt spray period with excellent chrome acceptability
Excellent solderability for pcb applications
Excellent anti-tarnish property in humidity
Excellent topcoat over nickel, satin nickel finish
Working procedure
A ready to use liquid to be used for silvery white deposition over several metal and metal alloys.
Cleaning: same as per other plating cycles required (i. E. Soak/electrolytic 120 r cleaner)
Trident 3000 is a liquid acidic cleaner used to remove grease, oil, rust, scale, from iron and steel at room temp. And activate the metal surface prior to plating. It effectively removes rust, scale, carbon smut and oxide, from steel by simple immersion and it also eliminates the necessity of acid pickling in plating cycle, thus replaces mineral acid pickling prior to plating. it also eliminates kerosene and sawdust oil cleaning step successively.
Equipment:
• plastic tank can be used for the preparing this solution • pvc or hdpe plastic container can be used
• fill the clean tank with 2/3 full of clean water • add required quantity of trident 3000 while stirring solution well • fill the tank to operating volume with water and stir to ensure through mixing of operating solution
Maintenance:
maintenance addition of trident 3000 solution are evidence by increase in time of derusting, descaling and by increasing ph or by longer immersion time required to clean the article. Regular addition of trident 3000 should be made on visual observation of the parts being processed; however it is advisable to prepare a new solution after continuous working of a month.
Real Metal Chem Private Limited Manufacturer and supplier of chemical compound, powder chemical compound, anhydrous chemical compound, inorganic chemical compound, copper sulphate, cupric chloride, cuprous chloride, ferric chloride and water soluble chemical compound.
Processing...
