Mahavir Tube Corporation

These valves are with replacable cartridge. Balanced poppet construction to reduce operating forces. The valves are available in Sub-plate mounting. In-line and right angle style.

Screw in Cartridge Size range - NG 16, NG25.
Pressure Rating - 315 bar.

Slip in Cartridge Size range - NG 16, NG25, NG32, NG40, NG50, NG63, NG80 & NG100
Pressure Rating - 400 bar.

These are intended to provide facility to access system pressure for the purpose of pressure measurement. For transmitting pressure through these couplings to the measuring devices, no special tools are needed. These couplings can be connected by hand even at rated pressure.
These couplings also can be used for purging air from the system.

Size for hose ends - M16 x 1.5, M16 x 2.0
..............................special threads 12 x 1.5
Pressure Rating - 400 bar.

These are designed for applications where fast connections and disconnection of hydraulic lines is a need of the system.
These couplings when connected offer unrestricted flow passage. These are designes for reliable and safe operations by avoiding permature flow before the coupling is fully closed.

Size range - G 1/4, G 3/8, G 1/2, G 3/4, G1
Pressure Rating - 400 to 800 bar.

Parallel male stud fittings, Elbows and Elastomeric seals and 'O' ring Sealing (BSP, Metric and UNF stud ends) Taper Male stud fittings and Elbows (BSPT and NPT stud ends).

These are two way, seat type valves. These are used for isolating the oil flow. The valves are available in sub plate munting. In-line and Right angle style.

Size range - G 1/4, G 3/8, G 1/2, G 3/4, G1, G1 1/4, G1 1/2.
Pressure Rating - 350 bar.

Trottle Valves allow adjustable throttled flow in both the directions. Throttle / Check valves give adjustable flow in one direction and allow free flow in opposite direction

Size range - G 1/4, G 3/8, G 1/2, G 3/4, G1, G1 1/4, G1 1/2.
Pressure Rating - 315 bar.

These are used in installations to provide rigid support to the pipes both in lateral and longitudinal directions relieving stresses caused by unequal movements in the pipe line. The use of clamps will also prevent the transmission of vibrations from the pipe to the frame and vice versa. Loosening of joints, welds and leakage in the systems can be avoided by rigidity.

These are available in metric series from -
Tube o.d of 6mm to 150mm as well as in Inch series from pipe o.d of 1/4" to 6.1/2" and NB tubes from 1/8" to 6"

These valves are used for checking the system pressure to which it is connected. These valves are available in Sub-plate mounting and panel mounting style.

Suitable for Guage- G 1/4, G 3/8, G 1/2,
Pressure Rating - 315 bar.

Straight Couplings, Equal Elbow, Equal Tee an Equal Cross fittings.