We offer our range of upper shock absorbers in a wide variety. These absorbers have been fabricated from premium rubber and come in the following specifications:

• Hardness : 60/ASTM D676
• Tensile: 2500 PSI / ASTM D412
• Max. Elongation : 350%
• Tear Test : 180 degree /ASTM D624
• Size : 24"* 34"*1.3/4"- 8 Pads
• Weight: 763 KG/number.
• Natural Rubber must be 100% bonded (under heat & pressure) to the steel plates.

Rubber`O`Ring Materials:

The descriptions of the materials and their characteristics to follow are typical. Exact specifications should be clarified by the vendor, as chemical and physical properties of an O-ring can differ based on manufacturing technique.

Butyl (-75° to 250° F)

Butyl is a common term used for the isobutylene isoprene elastomer. It is known for its excellent resistance to water, steam, alkalis, and oxygenated solvents. It has low gas permeation and is capable of providing high energy absorption (dampening) and good hot tear strength.

Ethylene Propylene (EPDM) (-70° to 275° F)

Good resistance to sunlight, weathering and ozone. It has poor resistance to petroleum oils and fuel. Good heat and compression set resistance.

Neoprene (Chloroprene) (-45° to 230° F)

The first synthetic rubber and exhibits generally good ozone, aging and chemical resistance. It has good mechanical properties over a wide temperature range.

Nitrile (Buna-N) (-30° to 275° F)

Good resistance to petroleum hydrocarbons and fuels. Widely used with most oils, hydraulic fluids, and alcohol. Many compound variations for specific applications, the higher the acrylonitrile content, the better the resistance to oil and fuel.

SBR (BUNA-S) (-30° to 275° F)

Good resistance to petroleum hydrocarbons and fuels. Widely used with most oils, hydraulic fluids, alcohol. Many compound variations for specific applications.

Silicone (-65° to 450° F)

Silicone has a broad temperature range and is generally Odorless / non-toxic. High resistance to sun and ozone and fungus. However it has poor tear and abrasion strength and poor resistance to oils.

Viton® (Fluorocarbon) (-20° to 400° F)


Excellent high temperature and chemical resistance and mechanical and physical properties. Low compression set and low gas permeability.

We have for our clients a wide range of bladder tanks that are used inside the cylinders to remove the water from the tank. The shell of the tank is constructed from high quality steel, complying with ASME specifications, possessing a tensile strength of not less than 70000 PSI. We offer these tanks in vertical as well as horizontal models.

We design and manufacture a range of rubber boats that are used for tourists' transportation purpose, military purpose, etc. Made from high quality rubber, these boats are durable and long lasting. We have made these boats from PVC, natural and synthetic rubber and offer them in a variety of sizes as per the clients' requirements.

Our array of silicon rubber sheets are made from premium quality natural rubber, viton rubber, neo print rubber . Precision made, these sheets are used for industrial and commercial purposes. We offer these sheets in different dimensions like:

• Size : 1mtr width X 2mtr length: 1.25 mtr width X 10mtr length
• thickness : 0.5 mm - 50 mm

Durable and reliable, our range of rubber speed breakers are used in normal roads as well as apartment roads and also in the subway parking's. Made from E, P, D, M rubber, these breakers offer higher efficiency. Our products can withstand rain, hot weather, sunlight, wind and thus assure our clients of longer life. Efficiently controlling the speed of the vehicles, our products are also used on roads in front of schools.

These are sheets, with very good weathering resistance as well as a moderate resistance to petroleum based fluids, Excellent di-electric properties and low permeability to air makes it versatile for many electrical applications, Used extensively for general engineering applications like gaskets, Garments and tank linings, seal and packaging.

We manufacture a wide range of rubber profile beading's that are used in electrical boards, ext ruder products, and in the front as well as side glasses of automobiles. Using high quality rubber, we have made these beading's in all colors and different sizes.

We design and develop a wide array of rubber lining rollers that find their application in conveyor rollers. These rubber lining are available in various sizes upto 10 meter length X 10 meter diameter.

Suppliers of rubber gaskets, rubber rings, industrial gaskets, rubber oil seals, rubber hoses, rubber buffers, engine mountings, silent block bushes, oil seals, brake parts and rubber to metal bonded auto components.

Vehicle impact is a constant problem for corners in heavy traffic areas. Typically, metal corner protectors are bolted or welded in place to spread the blow out to minimize impact. Collards absorbs the impact, reducing or eliminating damage to both the corner and to the vehicle. It is tapered to provide protection to the corner while keeping a low profile. Col-grades can be installed with mechanical fasteners to square posts or concrete columns.

Standard lengths of the collgard are in 1.0 meter and 1.2 meters. However, on request, they can be supplied in any length. GI clips thickness are 1.5mm,2mm and 3mm.Colgards are available with or without Galvanised iron insert clips at various wing lengths. Congards (light duty corner guards) extruded profiles are manufactured from high impact resistant rubber, designed to protect the corners of the columns. Collards are chemically resistant to harsh weather conditions. The special blend of the formulation withstand damages caused by collisions as well as abrasions.