 |
|
|
|
 Industrial AutoclaveHigh Pressure / High Temperature Autoclave
Features:- Autoclave vessel made of SS or C-276
- Solid forged Vessel, No Liners , No cladding, No welding
- Vessel size From 0.5 lit to 10 liters
- Pressure upto 6000 psi and Temperature upto 400°C
- Good for H2S and CO2 services
- Fully computer controlled with Touch screen control panel
- Gas-in / Gas-out, Liquid-In/ Liquid-Out ports.
- Ports for Electro-chemical probes.
- Electro-chemical probes.
- With all Safety features and Rupture Disks,
- Table Top or Trolley mounted
- DC motor Magnetic Drive stirrer
- Weight Loss and Electro-chemical analysis
- On line corrosion measurement probes.
|
|
|
|
|
|
Slow Strain Rate Test
Features:- Floor mounted Load frame
- Load upto 50 Tons
- Complete Computer control through Labview software environment
- Calibrated Load cell and LVDT sensors
- Suitable for SSRT Creep and fatigue tests
- Rugged design with sturdy motor couples with stepper motor for fine control
- Perfectly suitable for Material testing
- Optionally various types of sample containment vessels as per the test needs, pressure and temperature ratings
- Lowest possible strain rate is 10 -8"
- Fully automatic
|
|
|
|
|
|
|
Corrosion Monitoring Systems
|
|
|
ER Probes : State of art ER Corrosion probes- Retractable and Retrievable type
- Meets all and latest safety certifications
- All types of Probe reading and Data-logging instrumentation
- Supplied with safety clamps
LPR probes: State of art LPR probes with built-in SRC(Solution Resistance Compensation)technology- Retractable and Retrievable type
- Meets all and latest safety certifications
- All types of Probe reading and Data-logging instrumentation
- Supplied with safety clamps
Corrosion Coupons:- Made from certified materials
- High quality surface finish
- No cold worked surfaces
- Wide alloy selection
- Different varieties of standard coupons
Microcor® Probe Systems:- High Resolution upto 0.1mpy Monitoring
- Rapid Response, 100 times faster then ER
- Nearly real-time process monitoring
- Applicable in any corrosive multiphase (oil, gas, water, vapor) environment
- Approved for Hazardous Locations
- Online or data-logging configurations
Ultracorr- Ultrasonic Corrosion Monitoring:- Resolution upto 0.1mm.
- Non-invasive corrosion measurement, No welding, No hot tapping.
- Long-term monitoring, No Consumables, No maintenance.
- Measures corrosion and erosion
- Meets ICDA - Internal Corrosion Direct Assessment Compliance.
| | |
|
|
|
|
|
|
Magnetic Susceptibility System
Applications:- Geological and Soil Surveys
- Palaeomagnetics
- Archaeological Prospecting
- Palaeoclimatic Studies
- Hydrology
- Sedimentology
- Core Logging/Correlation
- Magnetic Fabric Analysis
Features:- Measurements are non-destructive
- Low frequency used ensures that the results are largely unaffected by sample conductivity
- Probes are temperature compensated to minimize drift during measurements
- Range of Flux-gate probes
|
|
|
|
|
Portable Rock Magnetometer
Portable Rock Magnetometer from Molspin- High sensitivity and low-cost
- Rugged construction
- Battery or mains-powered
- Used in field or in laboratory
|
|
|
|
|
Dual Speed Spinner Magnetometer
Features:- Measures remanent magnetization of rocks
- Most sensitive and accurate
- Follows classical (non-cryogenic) principle
- Two rotation speeds available
|
|
|
|
|
Fluxgate Magnetometers
Features:- Applications include the measurement of induced and remanent magnetization
- Portable, high performance instruments for precision measurements
- Measures the direction and intensity of static and slowly varying magnetic fields
- Axial and transverse probes are available together with unpackaged probes for cryogenic applications
- High Resolution
|
|
|
|
|
AF Demagnetizer
AF Demagnetizer – From MOLSPIN- Automated, microprocessor controlled process of demagnetization upto 150 mT
- Triple mu-metal shielding
- Effective attenuation of harmonic distortion of the demagnetizing field
- Demagnetization of tumbling specimen
|
|
|
|
|
ElectroChemical Workstation
Features:- Complete IM6 Electro-chemical workstation system for Routine and advanced Electro-chemical analysis
- Current : +/- 3 Amp
- Voltage +/- 10V
- Frequency 8 MHz
- Compliance Voltage upto 120 V
- Standard Electro-chemical analysis like:
- Potentiometry
- Galvanometry
- Cyclic Voltametry
- Square Wave Voltametry
- Electrochemical Impedance Spectroscopy
- Polarization Studies
- Amperometry
- Corrosion Noise analysis
|
|
|
|
|
Portable Rock Drill
Features:- Powered by a quiet, easy starting, powerful, reliable but light weight two-stroke motor
- Controlled by a convenient finger trigger on the rear handle
- Long period of uninterrupted drilling
|
|
|
|
