|
We offer to our clients post and scissor lifts as per the requirements. The products are approved by all the vehicle & tyre manufacturers in India viz., Maruti, Tata motors, Hyundai, Ford, Mahindra, Skoda, Eicher, Hindustan Motors, Nissan , Appollo, JK Tyres, Ceat, Bridgestone, Goodyear, Reliance, Essar,HPCL, BPCL, IOCL,Elf gas etc.
|
Two Post Lift (Electro Mechanical) | | We offer to our clients two post electro mechanical lift.
- 3 ton capacity
- Smooth lifting
- Safety mechanism
- Special adaptor for SUVs
MODEL :
SALIENT FEATURES :
- Closed chain drive for power transmission
- Electrical limit switches for stopping at maximum / minimum heights
- Telescopic type lifting arms
- Extra safety nuts
- Safety mechanism to prevent uneven lifting
- Inching switch for precise lifting control
- Automatic arms locking and releasing device while lifting and lowering
- Single Phase and Polarity reversal preventor
- Extender adapter for SUVs
- Asymmetric angle set post for easy door opening
- Chemical injection anchoring bolts (optional)
TECHNICAL SPECIFICATIONS
| Lifting capacity | 3.0 Ton | | Load distribution (Front : Rear) | 03:02:00 AM | | Lifting time | 60 seconds | | Drive through clearance | 2172 mm | | Maximum lifting height | 1875 mm | | Minimum lowering height | 150 mm | Front lifting arm adjustments
Minimum length
Maximum length |
940 mm
1490 mm | | Rear lifting arm adjustments Minimum length Maximum length | 665 mm980 mm | | Electric motor | 4HP, 960 RPM | | Power supply | 3 Phase, 440V AC, 50 Hz |
OPTIONAL ACCESSORIES (Special Adaptors)
| Tata Safari | 1 No. | | Tata Ace | 1 No. | | Ford Fusion | 1 No. | | 
 | | Request a Quote | |
| Wheel Alignment Scissor Lift |
| We offer to our clients wheel alignment scissor lift.
- 4 ton capacity
- Double scissor lift for wheel free operation
- Electric leveling system
MODEL :
SALIENT FEATURES:
- Very low drive.
- Hydraulic synchronization system with tandem cylinder prevents uneven lifting or lowering of the load.
- Platform level can be well adjusted to meet the need for wheel alignment.
- All pivot points made with self-lubricating bearing for long life.
- The position of the front wheel rotary table (optional part) is adjustable and suitable for various types of automobile vehicle wheel base.
- Sliding plates, lateral movement +/-50mm.
- 4000kg lifting capacity - Flush mounted.
- Ideal choice for wheel changing, chassis checking, vehicle maintenance and wheel alignment use.
- Maximum runways lifting height is 1700mm, including 360mm installation size.
- Adjustable turntable position, long rear sliding plate and in built pit jack for easy run out compensation.
TECHNICAL SPECIFICATIONS
| Lifting capacity | 4000 kg (4.0 Ton) | | Max. Lifting height | 2160 mm | | Max. Jacks height | 450 mm | | Length of runways | 4800 mm | | Lifting time | 50 S | | Air source | 0.6 - 0.8 Mpa | | Power supply | 380 V, 50 HZ/60 HZ | | Motor power | 2.2 KW | | | Request a Quote |
Four Post Lift | | We offer to our clients four post lift.
- 4 ton capacity
- Smooth lifting
- Rolling jack facility
- Suitable for wheel alignment
MODEL :
SALIENT FEATURES :
- Driven by hydraulic cylinder in stable lifting & lowering
- Offering full range mechanical protection by using safety block
- Connected by using steel cables, forced synchronized movement of the lift in order to effectively prevent the sloping of the vehicle
- 4 Ton with extended runway length for LCV & Bigger Vehicles (vehicle less than specified capacity)
- Wheel free jack 2 Ton capacity.
TECHNICAL SPECIFICATIONS
| Max. lifting capacity | 4 Ton | | Lifting height | 1850 mm | | Min. height | 200 mm | | Runway Length | 4800 mm | | Lifting times | 55 seconds | | Rated oil pressure | 18 Mpa | | Ramp (2 Nos.) | Included | | Weight | 1300 kg | | Power Supply | 440V, 50 Hz | | Motor Power | 3.0 HP | | Central Jack | 2 Ton | |
| | Request a Quote | |
| Two Post Lift (Electro Hydraulic) |
| We offer to our client two post electro hydarulic lift.
- 3.2 ton & 4 ton capacity
- Smooth lifting
- Safety mechanism
- Dual cylinder structure
MODELS :
- ME - FP6253A - 3.2 Ton (Floor Plate)
- ME - FP6254A - 4 Ton (Floor Plate)
- ME - CF6213A - 3.2 Ton (Clear Floor)
- ME - CF6214A – 4 Ton (Clear Floor)
SALIENT FEATURES :
- Floor plate design & Clear Floor design
- Powder coated finish
- Locking teeth in both columns
- Limit switch for stopping at max. height (Floor Plate)
- Pull two sides of safety release cable to lower the vehicle
- Asymmetric arm configuration
- Dual hydraulic cylinders ensures steady lifting & lowering
- Rigid safety shut-off bar (Clear Floor)
- Safety locks in each column
- 24V voltage operation system
TECHNICAL SPECIFICATIONS
| SPECIFICATIONS | ME – FP6253A | ME – FP6254A | ME – CF6213A | ME - CF6214A | | Lifting capacity (Ton) | 3.2 | 4 | 3.2 | 4 | | Lifting height (mm) | 1800 | 1800 | 1800 | 1800 | | Min. Height (mm) | 110 | 110 | 100 | 100 | | Overall height (mm) | 2826 | 2826 | 3600 | 3600 | | Inside column (mm) | 2750 | 2750 | 2790 | 2790 | | Lifting time (s) | 50 | 55 | 50 | 55 | | Rated oil pressure | 18Mpa | 18Mpa | 18Mpa | 18Mpa | | Truck adapters | Included | Included | Included | Included | | Asymmetric arm structure | Yes | Yes | Yes | Yes | | Weight (kg) | 650 | 700 | 650 | 800 | | Motor Power | 3.0 HP | 3.0 HP | 3.0 HP | 3.0 HP | | Power Supply | 230V/440V,50Hz | 230V/440V,50Hz | 230V/440V,50Hz | 230V/440V, 50Hz | | | Request a Quote |
|
View all our products / services as a slide show.
|
© Mana Tec Electronics Private Limited. All Rights Reserved (Terms of Use)