Service Station Equipments |
|
|
We offer to our clients service station equipments as per the requrements. The products are approved by all the vehicle & tyre manufacturers in India viz., Maruti, Tata motors, Hyundai, Ford, Mahindra, Skoda, Eicher, Hindustan Motors, Nissan , Appollo, JK Tyres, Ceat, Bridgestone, Goodyear, Reliance, Essar,HPCL, BPCL, IOCL,Elf gas etc. We aldo offer exhaust gas analyzer, vehicle exhaust gas analyzer, emission gas analyzer, automotive gas analyzer, automotive emission tester, automobile gas measuring equipment,gas test equipment, five gas analyzer, four gas analyzer, o2 gas analyzer, nox gas analyzer.
|
Paint Booth | | We offer to our clients paint booth.
- 3 Pass Heat exchanger
- Riello burner
- High density polystyrene foam as insulation medium
- Light inensity > 1000 Lux
MODELS :
- ME - PB 700 Plus
- ME - PB 700
- ME - PB 700 Eco Plus
- ME - PB 700 Eco
SALIENT FEATURES :
PANELS :
- The cabin is built with in-house made glued sandwich panels filled with White polystyrene foam as insulation material.
- The solidity of the glue connections and the compression resistance, insures high grade and stable panel.
- The powder coated sheet metal givesa very high quality and resistant finish on the sides of the panel.
- Due to our specific sandwich panel construction, there are no Thermo transfers between inside and outside of the booth.
LIGHTS :
- Standard supply of Paint Booth with 10 ceiling light boxes each with 3x36 Watts.
- Cool white light Neon tube.
- Electronic ballast as standard for energy saving.
- Ceiling light box corner also with inclination angle to allow more light reflects.
PLENUM & FILTERING :
- Air plenum feature first pre-filter class EU3 in Thermic group.
- Fine filter in ceiling class EU5.
- Air plenum built with our special design air deflector to allow more smooth and even distribution of air stream and avoid turbulences.
- Standard air plenum is single galvanized sheet.
FLOORING :
- Standard supply with metal base 300mm height.
- Two row K700 capacity galvanized grids floor
- Three row of reinforced checkered plates.
- Paint stop floor filter EU2 with filter frame.
- The whole flooring will be supported by transverse and longitudinal floor profiles.
AIR HANDLING UNITS (Thermic Unit / Extraction Unit) :
- Standard Paint Booth includes the Thermic unit but with option of extraction unit.
- Thermic unit with stainless steel heat exchanger unit and 1x5.5 kw motor and 18" centrifugal fan (ME-PB 700 Eco & ME-PB 700 Eco Plus)
- Damper controller make Belimo
- Diesel oil burner make Riello as standard.
- All the panels for the air handling units with easy removable door for the exchange of pre -filter.
- 7.5kw motor with 18" twin fan (ME-PB 700 Plus & ME-PB 700).
- Extraction unit, standard will be 1x5.5 kw motor and 1x18" fan, with manual adjustable damper (ME-PB 700 Eco Plus)
- Extraction unit, standard will be 1x7.5 kw motor and 1x18" fan, with manual adjustable damper (ME-PB 700 Plus)
- Full function control panel, standard with CE approval electric components.
All our control box with:
a) Thermostat 0-110°C
b) Electric wiring cable
c) Fan motor start / stop
d) Burner start / stop
e) Emergency stop
f) Digital temperature setting
g) Timer adjustment
h) Operating hour counter
Download Technical specifications
| 
 | | Request a Quote | |
| A/C Gas Charger |
| We offer to our clients A/C gas charger.
- Automatic AC recovery, recycling & recharging
- LED display
MODEL :
SALIENT FEATURES :
| Type of refrigerant | R134A | | Recovery & Recycling / Vacuum / Recharging | Automatic | | Oil Reintegration | Manual | | Operation | Operator Intervention | | Control panel | Membrane key pad | | Display | LED & Digital | | Automatic Leak Indication | Manometer | | Electronic scale | Yes | | Alarms for Hi-Pressure / Empty & Full Bottle | Yes | | Refrigerant bottle | 10 kgs | | RS 232 Serial Port for future Software updates | Yes |
TECHNICAL SPECIFICATIONS
| Recovery / Recycling rate | Max 300 gm / min in liquid phase | | Vacuum pump capacity | 84 l/min capacity, 0.1 mbar vacuum | | Vacuum Pressure | 0.1m bar | | Compressor | 12cc / 0.33 HP | Electronic scale resolution
Refrigerant
Oil |
10 gm
5 gm | | Filters for humidity & acidity | 2 Nos. | | Working temperature range | 11 - 49°C | | Power Supply | 230V , 50 Hz, Single Phase | | Power Consumption | 800 watts (Approx) |
STANDARD ACCESSORIES
| High Pressure Red Hose (2 meters) | 1 No. | | Low Pressure Blue Hose (2 meters) | 1 No. | | Red Quick Coupler | 1 No. | | Blue Quick Coupler | 1 No. | | | Request a Quote |
Diesel Smoke Meter | | We offer to our clients diesel smoke meter.
- Battery based RPM measurement
- Suitable for road test using vehicle battery
- RS232C serial port for PC interface
- Portable light weight
MODEL :
SALIENT FEATURES :
- Measures smoke opacity of diesel vehicles in % opacity and K value
- Measurement principle : Partial flow, optics based on folded geometry
- Suitable for free acceleration test
- RPM and Engine oil temperature measurement
- Battery Based RPM measurement suitable for all vehicles
- Portable, Compact and light weight design
- DC operation suitable for “Road Tests” using vehicle battery
- Low voltage indication for battery operation
- Automatic Zero and Span calibration
- Automatic Pressure Regulation
- Handheld, Menu driven LCD remote control unit
- Pass / Fail indication and emission limit in printout
- Vehicle no., vehicle specification, Operator name and test data in printout
- RS232C serial port for PC interface
TECHNICAL SPECIFICATIONS
| Measurement Parameters | Range | Resolution | | Opacity | 0 – 99.9 % | 0.10% | | K-value | 0 – 9.99 m-1 | 0.01 m-1 | | Linearity | ± 0.1 m-1 | | | Repeatability | ± 0.1 m-1 | | | Zero & Span drift | ± 0.1 m-1 | | | Response time – Physical | < 0.4 seconds | | | Response time – Electrical | < 1 milli second | | | Warm up time | < 8 minutes | | | Engine RPM | 200 - 9990 RPM | 10 RPM | | Engine Oil Temperature | 0 - 150º C | 1º C | | Smoke measuring cell length | 215 mm | | | Printer | 24 Column Dot matrix | | | Power Supply | 12V DC (or) 230V AC ± 10%, Single phase, 50Hz | | | Power Consumption | 300 Watts in AC / 100 Watts in DC | | | Operating Temperature | +5° C to +50° C | |
STANDARD ACCESSORIES
| Smoke sampling hose | 1 No. | | Smoke sampling probe - ID 16 mm | 1 No. | | Oil Temperature probe | 1 No. | | Battery cable. | 1 No. |
OPTIONAL ACCESSORIES
| RPM sensor clamp assembly | 1 Set | | Smoke sampling probe – ID 22.5 mm & ID 10 mm | 1 No. | | Smoke test software | 1 No. | | RS232 PC Interface cable | 1 No. | | 24 Column Dot matrix Printer | 1 No. | |
| | Request a Quote | |
| Exhaust Gas Analyser |
| We offer to our clients exhaust gas analyser.
- Measuring CO, HC, CO , O2
- NOx measurement
- NDIR technology
- RS232C serial port for PC interface
- Portable light weight
MODEL :
SALIENT FEATURES :
- RPM Measurement facility using inductive pickup
- 7 Segment LED Display
- Automatic condensate discharge
- Automatic zero calibration
- Digital span calibration
- DC Operation suitable for “Road Tests” using vehicle battery
- Display of Lambda / AFR / PEF
- Petrol / CNG / LPG selection
- Indication for Low / High flow & Low voltage
- Electronic Leak Check facility
- HC Residue Test
OPTIONAL
- NOx measurement as Fifth Gas
- Engine Oil Temperature measurement
- Battery Based RPM measurement suitable for all vehicles
TECHNICAL SPECIFICATIONS
| Measurement Parameters | Range | Resolution | | Carbon monoxide – CO | 0-9.99 % | 0.01% | | Carbon Dioxide – Co2 | 0-19.9% | 0.10% | | Hydro carbon – HC | 0-15000 PPM | 1 PPM | | Oxygen O2 | 0-25% | 0.01% | | Nox | 0-5000 PPM | 1 PPM | | Oil Temperature | 0-150° C | 1° C | | AFR | 7-23% | 0.01% | | Lambda | 0.50-1.50 | 0 | | Engine RPM | 400-9990 RPM | 10 RPM | | Measuring gas Intake | 3 litres / Minute | | | Leak Test | Electronic | | | Condensate Discharge | Automatic | | | Response Time | < 15 sec (for sample probe length of 3m) | | | Warm Up time | < 3 Min | | | Zero & Gas Span Calibration | Automatic | | | Span Calibration | Digital | | | Printer (Optional) | 24 column dot matrix | | | Power Supply | 12V DC(or) 100V – 265V AC Single Phase, 50 Hz | | | Power consumption | 25 W | | | Operating temperature | +5° C to +45° C | |
STANDARD ACCESSORIES
| Sampling Probe Assembly | 1No. | | Battery Cables | 1Set | | Inductive Pickup Cable Assembly | 1 No |
OPTIONAL ACCESSORIES
| Universal Probe Adapter kit for 2/3 wheelers | 1 Set | | NOx Sensor | 1 No. | | Oil Temperature probe | 1 No. | | Gas test software | 1 No. | | RS232 PC Interface cable | 1 No. | | 24 Column Dot matrix Printer | 1 No. | | | Request a Quote |
|
View all our products / services as a slide show.
|
© Mana Tec Electronics Private Limited. All Rights Reserved (Terms of Use)