Wheel And Tyre Equipments |
|
|
We offer to our clients wheel and tyre equipments as per the requirements. The products are approved by all the vehicle & tyre manufacturers in India viz., Maruti, Tata motors, Hyundai, Ford, Mahindra, Skoda, Eicher, Hindustan Motors, Nissan , Appollo, JK Tyres, Ceat, Bridgestone, Goodyear, Reliance, Essar,HPCL, BPCL, IOCL,Elf gas etc.
|
Automatic Tyre Inflator | | We offer to our clients automatic tyre inflator.
- Suitable for Cars, LCVs & Trucks
- Faster tyre inflation
- Editable default set pressure
- Decide Fast / Slow filling range
MODELS :
- Air-o-jet D
- Air-o-jet H (for Buses & Trucks)
SALIENT FEATURES :
- Selectable units of pressure display, PSI, Kg/Cm2, KPa or Bar units
- Increment and Decrement keys for setting desired Tyre Pressure
- Audio & Visual Indication on reaching Set Pressure
- ON / OFF control of LCD Backlight
- Confirmation request for Set Pressure of 50 PSI and above
- Power saving facility during Idling
- Air leak detection and Auto Cutoff for conserving Air
- Self checking On-Line Error Code display
- Very Intelligent Software :
a) Detects the Tyre size b) Decides Fast / Slow filling range c) Editable default Set Pressure - IP65 compliant (Dust and Water Proof)
- Confirmation request for Set Pressure of 100 PSI and above (Air-o-jet H)
TECHNICAL SPECIFICATIONS
| Pressure Setting Range | 0 - 150 PSI | | Resolution | 0.5 PSI (0.035 Kg/Cm2 / 0.035 Bar / 3.5 KPa) | | Accuracy | ± 0.5% of full scale | | Display | 4 Digit, 1.2" height LCD | | Maximum Input Pressure | 164 PSI | | Maximum Over Pressure | 250 PSI | | Power supply | 170V - 265V AC, Single phase, 47 - 63 Hz | | Power consumption | 30 watts |
STANDARD ACCESSORIES
| 7 Meter Braided Hose with closed Type Nozzle (For Air-o-jet D) | 1 No. | | 15 Meter Braided Hose with closed Type Nozzle (For Air-o-jet H) | 1 No. | | 3 Meter Braided Hose | 1 No. |
OPTIONAL ACCESSORIES
| Auto Drain Filter for filtering moisture, dust and oil particles | 1 No. | | Floor mounting stand with illuminated display and Tyre Pressure charts | 1 No. | | Remote Control Unit (wired) | 1 No. | | 
 | | Request a Quote | |
| Wheel Balancer |
| We offer to our clients wheel balancer.
- Five ALU functions
- Self calibration
- Automatic distance input
- Wheel dimensions data bank
MODELS :
- WB - VL – 65
- WB - DL – 65
SALIENT FEATURES :
- Static (Single plane) and Dynamic (Two plane) balancing
- Simultaneous display of Inner and Outer plane results
- Five modes of Alloy wheel functions
- Two modes of measurements – Normal and Fine
- Split weight mode (Spokes Program)
- Optimisation program
- Self checking, on-line ERROR display facility
- Dimension setting in "INCH" or "MM"
- Unit conversion in "grams" / "ounces"
- Self calibration
- Automatic distance input
- Mid centering device for positioning of wheels accurately
- Quick change Lock Nut to ensure fast mounting and removal of wheel
- Rim distance input confirmation through Beep sound
- Spin count
- Wheel dimensions databank
- Auto unbalance recalculation w/o wheel Run on input parameters change
- Automatic start with Wheel guard closure
- Multi-operator program
- Date wise and User wise Spin count report generation
- Eccentricity measurement
TECHNICAL SPECIFICATIONS
| Maximum wheel weight | 65 kg | | Maximum wheel diameter | 39" (990 mm) | | Maximum wheel width | 21" (533 mm) | | Rim diameter | 10" to 24" (254 mm to 610 mm) | | Rim width | 1.5" to 20" (38 mm to 508 mm) | | Rim distance By distance measuring rod By keypad entry | 4 mm to 236 mm 4 mm to 550 mm | Resolution
Fine mode
Normal mode |
1 gm
5 gm | | Maximum unbalance measurement | 300 gm | | Accuracy | 1 gm | | Position Accuracy | ± 1° | | Balancing speed | 200 RPM | | Spin time | 8 to 16 sec. | | Motor | AC Motor 230V, Single Phase, 50 Hz | | Power supply | 230V Single Phase, 50 Hz | | Ambient temperature | 0ºC to +50º | | Humidity | RH below 90% Non condensing |
STANDARD ACCESSORIES
| Weight Plier | 1 No. | | Caliper | 1 No. | | Mid centering device kit with Wheel seating cones | 1 Set. |
OPTIONAL ACCESSORIES
| Wheel Guard | 1 Set | | Wheel seating cone for various sizes | 1 Set | | Double ended Wheel seating cone | 1 No. | | Universal flange kit | 1 Set | | Weight fixing gauge (for Alloy wheels) | 1 No. | | Sticker weight remover | 1 No. | | | Request a Quote |
Tyre Changer | | We offer to our clients tyre charger.
- Fully Automatic
- Suitable for Car & LCV tyres
- Tubeless Tyre Operation
- Fast removal of tyres
MODELS :
SALIENT FEATURES :
- Pneumatically operated tilting type vertical column
- Pneumatic Twin Cylinders for firm clamping
- Four Jaw self centering chuck
- Alloy Wheel Plastic protector for jaws
- Sliding horizontal arm with pneumatic locking system
- Pneumatic locking of Hexagonal shaft
- Clockwise and Anticlockwise rotation of turn table using Electric Motor
- Bead breaking by pneumatically operated cylinders
- Tubeless tyre operation with Inflating device and Manometer
- Built-in Air Tank for Tubeless operation
- Individual pedal for vertical column tilting
- Individual pedal for Tubeless tyre Inflation
- Built-in FRL (Filter, Regulator and Lubricator)
- Motorcycle adopter (Optional)
TECHNICAL SPECIFICATIONS
| Rim clamping from inside | 12” – 24” (305 – 610 mm) | | Rim clamping from outside | 10” – 22” (254 – 559 mm) | | Max. wheel diameter | 40" (1016 mm) | | Max. wheel width | 3” – 15” (76 – 380 mm) | | Operating pressure | 8 – 10 bar | | Bead breaker force | 2500 kg | | Noise level | <70 db | | Electrical Motor | 1 HP | | Power Supply | 220 - 240 V AC, Single Phase, 50Hz |
STANDARD ACCESSORIES
| Inflation Gun | 1 No. | | Jaw cover | 1 Set. | | Tyre lever | 1 No. | | FRL Unit | 1 No. |
OPTIONAL ACCESSORIES
| Motorcycle Adapter | 1 No. | | Plastic mounting head | 1 No. | | Motorcycle mounting head | 1 No. | |
| | Request a Quote | |
| Wheel Aligner |
| We offer to our clients wheel aligner.
- Wireless / Cableless
- RF ZIGBEE data communication
- Rapid Runout compensation
- Quick Wheel Alignment facility
- More number of Alignments per day – higher productivity
- Multi-Language software
MODELS :
- R pac Super (8x6) (Fully Loaded)
- R pac Premium Plus (8x6)
- R pac Premium (6x6)
- C pac Premium (6x6)
- R pac Optima (6x4)
SALIENT FEATURES :
- Data communication (RF 2.4 GHz)
- Field programmable 15 RF Channels
- Sensor arms with unique design to work independently either in RF or Cable
- Simultaneous Front and Rear wheel alignment (4x4)
- Four point Runout compensation in single rotation
- Thrust angle compensation
- Unlimited Memory for Vehicle Specifications
- Power failure data protection
- Animated Pictorial Display of angles during alignment
- Three Color Bar display for adjustment of all angles
- Automatic tracking of Left and Right turns for Caster measurements
- Automatic tracking of Left and Right turns for Kingpin measurements
- Electronic on-line arms leveling
- Adjustment of Camber in wheel jacked-up position
- Spoiler program (for low body vehicles)
- Facility for enabling the Optional features in the field itself
- Quick Wheel Alignment program
- Rear Setback & Track width difference
- Multimedia Speaker for Voice prompt
- Data Manager Software for storing alignment results
- Printout for sensor calibration values
- 3-D Pictorial & Three color text Printout
- Software upgradation through CD Drive
- WINDOWS XP Software, CD Drive & Inkjet Printer
OPTIONAL FEATURES
- Electronic Rotary Plate (For measuring Lock Angle & Toe out on Turns)
- Multi-lingual program
- Measurement of Lock angle & Toe out on Turns
- Auto-charging facility while the sensor arm is operated using cable
- Cable option, while the battery power is low
Download Technical specifications
| | Request a Quote |
|
View all our products / services as a slide show.
|
© Mana Tec Electronics Private Limited. All Rights Reserved (Terms of Use)