A 53Type
A/B

AaSTM

Grade

Chemical Requirement Percent (%) Mechanical requirements

C Max

Mn Max

P Max

S Max

Si Max

Ni

Cr.

Mo

Cu

Others

Tensile Strength mini-MPa/Psi

Yeild Strength mini-MPa/Psi

Elong Mini %

Impact C Test at F

0.25 0.30

0.95 1.20

0.05 0.05

0.06 0.06

---

0.40 max 0.40 max

0.15max 0.15 max

0.40 max

0.40 max

0.08 max 0.08 max

330-48000 415-60000

205-30000 240 -3500

36 29.5

-

-

A106

A B C

0.25 0.30 0.35

0.27-0.93 0.29-1.06 0.29-1.06

0.035 0.025 0.025

0.10mini 0.10mini 0.10mini

0.4max 0.40max 0.40max

0.40 max 0.40 max 0.40max

0.15max 0.15 max 0.15max

0.40 max 0.40max 0.40max

0.40 max

0.08 max 0.08 max 0.08max

330-48000 415-60000 415-70000

205-30000 240 -3500 275-40000

L35-T-25 L30-T16.5 L30-T16.5

---

We offer to our clients different grades of titanium and tantalum metals that are used in the manufacturing of tubes for heat exchangers, condensers, cooling coils, chemical desalination, anodes, jigs, fixtures and baskets, surgical implants, tanks. Apart from this, some of their other uses include:
• Rocket motor, structural forging and fasteners, pressure vessels, gas and chemical pumps, cryogenic parts, ordnance equipment, marine components, steam turbine blades and many more.
Technical Specifications:

Nominal Composition
Midhani Grade	Spec ASTM	Ti	Fe	O2	N	Application
Titanium & Titanium Alloys [ASTM - B265/B348/B338/B381]
Titan 12	Grade 1	99.8	0.2	0.1	0.05	Tubes for heat exchangers, condensers, Chemical desalination, anodes, jigs, fixtures and baskets, surgical implants
Titan 15	Grade 2	99.7	0.25	0.2	0.06
Titan 31 Titan 31 (ELI)	Grade 5, Grade 23	6 AI, 4V, Bal Ti	-	-	-	Rocket motor, structural forgings and fasteners, pressure vessels, gas and chemical pumps, crygenic parts, ordance equipment, marine components, steam turbine blades

We offer to our clients beryllium copper alloy products that are available in strip, plate, rod, wire, squares in all shape & size. Technical Specifications: Alloy (NGK) Product

Chemical composition (wt%)		Major Feature
25	Be Ni_Co Ni Co Fe Cu Be Ni Co Fe	1.80~2.00 0.20min 0.6max 99.5min	# High strength # Fatigue Strength # High Electrical conductivity # Wear resistance # Non magnetic permeability	Strip Plate Rod wire Forged Product
165	Be Ni_Co Ni Co Fe Cu Be Ni Co Fe	1.80~2.00 0.20min 0.6max 99.5min		Strip Plate
11	Be Ni_ Cu Be Ni	0.2 ~0.6 1.4~2.2 99.5min	High strength Fatigue Strength High Electrical conductivity Wear resistance Non magnetic permability	Strip Plate Rod wire Forged Product
165	Be Ni_Co Ni Co Fe Cu Be Ni Co Fe	1.80~2.00 0.20min 0.6max 99.5min		Strip Plate
7	Be Ni Co A$ Cu Be Ni Co A$	0.2~0.4 1.8~2.5 0.6max 99.0min.
25-K	Be Ni Co Ni Co Fe Pb Cu Be Ni Co Fe pb	1.80~2.00 0.20min 0.6max. 0.5~1.2 99.5min	Machinability High strength Fatigue strength High electrical conductivity Non magnetic permability	Rod

Technical Specifications: Midhani GradeSimilar GradeFe NiCr Co Cu AIMoMn Ti Si C Others Application

Nominal Compositon
Super Alloys / Heat Resistant Alloys
Superfer MDS	Incoloy DS	Bal	37	18	-	0.5	-	-	-	0.2	2.1	0.1	-	Furnace parts and heat tratment jigs in carburising and nitriding furnaces
Superfer 800/800H	Incoloy 800/800H	Bal	32	21	-	-	-	0.3	-	1.5 max	0.3	1max	0.1 max	Furnace equipment,steam boilers, heat exchangers and piping in chemical industry, reformer, baffle plates/tubes in fertilizer plants
Superni 600	Inconel 600	10maxl	bal	15.5	-	-	-	-	0.5	-	-	-	-	Furnace parts and heat tratment jigs
Superni 601	Inconel 601	bal	62.6	23.05	-	0.10	1.48	-	0.80	-	0.37	0.025	-	High temp heat resistant alloy
Superni 75	Nimonic 75	3	bal	19.5	-	-	-	-	0.3	-	0.1	-	W-0.5	Gas Turbine Parts
Superni 76	Hastelloy	18.5	bal	0.2	-	9.0	1.0	-	-	0.3	0.1	-	-	Gas Turbine Parts

We offer to our clients premium range of aluminium and alloy products that successfully meet the varied National and International standards like New IS Old IS, U.S.A (A.A.), Britain (B.S), Germany (DIN), Russia I.S.O., French ND and many others. Technical Specifications:

India New IS Old IS		U.S.A (A.A.)	Britan (B.S)	Canada	Germany (DIN)	Russia	I.S.O.	French ND
19501	1E	1050 (E.C)	1E	C 1S	E-AI 99.5	-	-	-
19500	1B	1050	1B	1S	A-99.55	-	A1-99.5	1050 A
19600	-	1060	-	-	-	-	-	-
19700	-	1070	-	-	AI-99.7	-	AI-99.7	-
19800	1A	1080	1A	-	-	-	AI-99.8	-
19000	1C	1100	1C	2S	AI 99.0	AD	AI-99.0	1200
-	-	2011	FC1	28S	AI-Cu-Bi - PB	-	AI -Cu- Bi -Pb	2011
24345	H15	2014	H15	B26S	AI-Cu-SI	AK	-	-
24534	H14	2017	H14	17S/16S	-	D1	AI -Cu -4Mg Si	-
-	-	2024	-	24S	AI -Cu -Mg.2	-	AI-Cu 4MG 1	2024
31000	N3	3003	N3	3s	AI-Mn	AI-Mn	AI-Mn1	3003
43000	N2	4043	N21	33S	Ai-Si-5	AK	AI-Si5	4043

Technical Specifications: Material DescriptionStandard SpecificationCopper Cu% Lead pb%Tin Sn% Iron Fe%Alluminum AI%Manganese Zn%Others ElementsZinc Zn%Nickle N%

Specification Table of Brass

Free Cutting Brass Type I

IS:319/89 BSS:249 EQUV:BS 2874/86 CZ121pb3

56 to 59

2.0 to 3.5

-

0.35 max

-

IS :3488/89 BSSL249 EQUV:BS 287/86 CZ 124

60 to 63

0.5 to 1.5

-

Forging Brass

IS:319/89 BSS:249 EQUV:BS 2874/86 CZ124

56.5 to 60

0.6 to 2.0

-

0.30 max

-

-

0.2 Max

Remn

-

Special High Tensile Brass for Valves

Grade I General

Grade II general I.O.C

56.5 to 60.0

1.0 to 1.5

-

0.30 max

-

0.2 to 0.5

0.75 Max incl. Fe

Remn.

-

Technical Specifications: Steel Type Quality AISI C Si Mn Cr W V CoMoSi

High Speed Steel	18% W 18%W 5% Co 18%W 10%Co 6/5/2	T1 T4 T5 M2	0.75 0.80 0.75 0.80	0.40 0.40 0.40 0.40	0.40 0.40 0.40 0.40	4.30 4.30 4.30 4.30	18.0 18.0 18.0 6.5	1.00 1.60 1.60 2.00	-5.0 9.5-	- 0.80 0.80 5.00	- -max
Hot Work Steel	9% W 5% W	H21 H11	0.30 0.36	0.20 1.00	0.30 0.40	2.60 5.00	8.5 -	0.40 0.40	- -	- 10	- -max
Non Shrinking Die Steel	HCHC " OHNS " "	D3 D2 01 02 E0300	2.0 1.70 0.95 0.90 1.00	0.30 0.30 - 0.20 0.40	0.30 0.30 1.00 1.90 1.00	12.00 12.00 0.50 0.30 1.00	- 0.5 0.5 - -	0.10 0.10 0.10 0.10	- -	- 0.60 - - 0.10	- -
Construction Steel	EN-8	1040	0.35/0.45	0.10/0.35	0.60/0.90	-	S & P	each (MAX)	0.06	-	-
Spinning	EN -45	92.55	0.50/ 0.60	1.50/ 2.00	0.70/ 1.00	-	S & P	each (MAX)	0.05	-	-
Steel	EN-47	6150	0.45 / 0.55	0.50	0.50 0.80	0.80 / 1.20	-	-	S & P	each (MAX)	0.5

We are stockist, exporter of non ferrous metal, antimony, bismuth, boron, cadmium, chromium, cobalt, indium, iron, lead, lithium, manganese, magnesium, mercury, molybdenum, nimonic, nichrome, tellurium, tin, tungsten, vanadium and zinc. These metals are available in form of powder, granuals, reffels, ingots, chips, sheets, wires, rods(all shape & sizes). We also have a foundry to mix the above alloys as per your requirments.

We have ready stock items of earthing material and electrical fittings for industrial purpose. Electrolytic copper and hot dipped galvanised, earthing material in form of strips, wires, earthing plates, cable trays, poles, wire ropes etc. as per IS, BS, ASTM, DIN and ISO Standards.

Cooling Coils: We manufacture customized cooling coils from titanium, stainless steel, inconel material
Dish Ends: We have a heavy press for manufacturing all kinds of dish end for tanks and vessels. 300 to 2000 mm dia round plates in all kind of metas.
Limpad: We manufacturers limpad as per clients drawings.
Bend / Miter Bends: We are manufacturer of all kinds of pipe fittings. Specialist of bend and miter bend, all size available between 4" to 36", as per your degree and radius.