Our range of silicon cables come with silicone rubber insulation and are conventionally fibre glass braided,ensuring excellent electrical properties & high thermal resistance. It helps the cables to withstand maximum continuous temperature of 150/180°C for continuous & 250°C for short-circuit operations.

It can also withstand minimum working temperatures of -55°C and helps in maintaining circuit continuity even in fire as silicone rubber burns into an insulating ash. Further our cables are also resistant to moisture, ozone radiation & chemicals.

General Construction (Conforming to IS 9968) Conductor : Annealed tinned copper wires solid (Class 1), Stranded (Class2), Flexible (Class 5) Complying with the requirement of IS 8130-1984 applied

Separator Tape: Suitable material separator tape may be applied over the conductor.

Insulation : General Service elastometer compound type ie 1 of IS 6380-1984. Heat Resisting elastometer compound type ie 2 of IS 6380-1984. Silicon Rubber type. IE 5 of IS 6380-1984

Core Identification: Colored insulations, Nos. PE tape colored proof tape. Nos. Printing

Filers: Natural or synthetic fibres or elastometer suitable for the operating temperature and compatible with the insulating material.

Sheath: General service sheath Type SE1/SE2 of IS 6380-1984. Heavy duty Sheath Type SE#/SE$/of IS 6380-1984

Our range of trailing cables are designed for meeting reeling-unreeling purposes and find application in material handling applications. We offer these cables with EPR insulation & PCP sheath.

We offer clients a wide range of composite cables that feature power and control cable in same cable. It helps in saving space & successfully meets the specific operating requirements of the industries. We hold expertise in manufacturing them in both rubber and PVC finishes.

In keeping with the company's commitment to technology advancement, elastometer materials such as Polychloroprene (PCP). Chloro-Sulphoneted Polythelene (CSP), Nitirile Rubber/PVC blends, Ethylene Propelene Rubber (EPR).

Elastomeric compounds for insulating adn setting of cables are formulated to meet the requirement of IS 6380, BS 6899, IEC 60502 and other international specification.

Mansfield Cable presents complete range of LT, PVC insulated, Armoured & Unarmoured power cable for nearly every application, Manufactured on latest machines & tested on highly sophisticated test equipments, Mansfield power cables ensure fault free operation over a prolonged period of time.

Cross linked polythene (XLPE) is a thermosetting material obtained by forming cross linkages in polythene molecules. In the past two decades PVC had been the preferred material for insulating cables. It suffered from inherent disadvantages because of its thermoplastic nature. This restricted the maximum operating temperature of the conductor and ability to withstand thermal overloads. It also had higher dielectric loss.

Control Cables differ from Power Cable in their application that they are used to carry control signal of low power strength, but can be subjected to severe working temperature condition like heaters, boilers and can be exposed to oil, chemicals and other solvents.

Mansfield presents control cables to suit Indian industry requirement. Its specially formulated outer sheath (jacket) is indigenously designed to withstand harshest of environmental conditions. Available in tinned and bare copper conductors.

Mansfield Control Cables can be customized as per requirement. For more than 5 cores, cores are grey colored with individual core number printed in numerial and word through out the length.

FRLS XLPE Cables

XLPE Cables can also be used with FRLS PVC sheathing to meet flame retardent low smoke properties.

Process Instruments, Equipments, Transducers Require Transmitting Low Level Signal Transmission To Different Places In Plant. These Places may house boiler and turbine where temperature is well 100C or chemical reactors which add toxic fumes and liquids in the environment. Mansfield Instrumentation Cables are designed, manufactured and tested for such conditions. Mansfield Instrumentation Cables assure signal transmission free from external noise with zero signal loss and minimum distortion. Instrumentation Cables are also manufactured as per customer requirement and specification.

Sizes Covered : 0.25mm, 0.5mm, 0.75 mm, 1.0mm, 1.5mm, 2.5mm

Fire Survival Cable (Type FS) is used for the emergency circuit connected between emergency power source and the fire extinguishing system. It has special characteristic in addition to low smoke emission and low halogen property to maintain circuit integrity to essential service under severe fire conditions.

Conductor	Annealed Copper /Aluminium Wire
Fire Proof Layer	Elastomer/ Rubber (IS:6380)
Insulation	Same as 2. But optional
Filler	Suitable filler after laying up (optional)
Binder Tape	Binder Tape Two layers of glass fibre tape
Inner Sheath	HOFR-FRLS Elastomer (Rubber)
Armouring/ Screening	Suitable annealed Galvanised Steel wire/ TinnedCopper-wire braided.
Overall Sheath	HOFR-FRLS Elastomer (Rubber)

At present Aluminium and Copper Welding Cables are covered under IS: 9875-1981. The earlier IS: 434/1984, Covered only VIR covering. Whereas, the present specification covers Welding Cables under two categories.

Cable with General Purpose rubber compound covering (GPR).

Cable with Heat Resistant, Oil and Flame retardant compound covering (HOFR)

Conductor:

• Copper Conductor: The conductor shall be composed of plain or tinned annealed high conductor copper wires complying with IS:8130-1984. The conductor formation shall be according to class 6 of IS: 8130/1984.
• Aluminium Conductor: The conductor shall be composed of Aluminium wires somplying with IS 8130/1984. The conductor formation shall be according to IS: 8130-1984.

Separator:
The separator shall be dry paper, polyester tape or any other suitable material. The conductor shall be covered with a separator. The separator tape shall be sp applied as to give complete coverage to the conduction.

Covering : GPR/HOFR
The general purpose rubber compound shall comply with requirements of type SE1 to IS: 6380-1984. The heat resisting normally duty oil resisting flame retardent (HOFR) compound shall comply with the requirement of Type SE 3 to IS:6380-1971. The covering shall consists of one of the following applied over the conductor and separator.

Mansfield manufacturers comprehensive range of wiring cables to B.I.S, British Standards or Defence specifications or in accordance with customer requirements.
The cables are resistant to toxic vapour, oils and heat. Aircraft wiring cables are also suitable for industrial applications.

The British Standards states the requirements for 'Nyvin' type cables for aircraft wiring. The cables are suitable for use in circuits in which the voltage between conductors, between a conductor and a metal braid, surrounding it and between a conductor and the aircraft structure nowhere exceeds 600 volts r.m.s and in which the frequency does not exceed 1600 c/s.