Marcus Control & Automation

• Designed for general purpose indoor commercial use as a junction, pull or switch box.
• Hinged cover with latch provides easy access during installation and maintenance

• Designed to house the following safety disconnect equipment:

ABB Controls,Allen Bradley, Cutler Hammer, Siemens I-T-E Max-Flex™, General Electric, Square D 

flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers.

• Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments.
• For use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Impressive styling features make the Eclipse Junior a suitable addition to any high—tech equipment installation.
• For high temperature applications, a gasket retainer may be required, please refer to factory.

• Designed for general purpose indoor commercial use as a junction, pull or switch box.

• Designed for general purpose indoor commercial use as a junction, pull or switch box.

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical       junction boxes or terminal wiring enclosures.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor                   applications for full weather protection.

• Designed to accept standard heavy duty oil tight pushbuttons, switches and pilot lights.
• Provides protection from dirt, dust, oil and water.

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides a degree of protection from falling dirt, dust, oil and water.
• Continuously hinged door may be removed by pulling the hinge pin.
• Door is secured with easily operated stainless steel clamps.
• Provision for padlocking.

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides a degree of protection from falling dirt, dust, oil and water

• Designed to accept standard heavy duty oil tight pushbuttons, switches and pilot lights.
• Provides protection from dirt, dust, oil and water.

• Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
• A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.

• Designed for indoor use to enclose controls, instruments, and components which do not require oil-tight or       dust-tight protection.
• Ideal for applications where components may be easily mounted and wired prior to installation of wrapper            and door

• Designed to accept the following dis­connect switches and circuit breakers:

ABB Controls, Allen Bradley, C-H Westinghouse, General Electric, Siemens I-T-E Max-Flex™, Square D flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers.

• Designed for use as a wiring/junction box.
• Provides protection against rain, sleet, snow and dripping water.

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides a degree of protection from falling dirt, dust, oil and water.

• Designed for indoor housing of metering transformers per Hydro Quebec specifications.

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical      junction boxes or terminal wiring enclosures.
• Provides a degree of protection from falling dirt, dust, oil and water.

• Designed for use as a wiring/junction box.
• Provides protection against rain, sleet, snow and dripping water.
• Drip shield top and seam-free sides, front and back.

• Designed for indoor housing of metering transformers.
• 2 cutouts in top of each cabinet with metering plates included.
• Removable inner panel.

• Designed to accept 22mm miniature oil tight pushbuttons, switches and pilot lights.
• Provides protection from dirt, dust, oil and water.

• Ideal as a housing for video screens.
• Flexible design provides panel mount or rack mount capabilities for a variety of applications.
• Generally used in combination with other modular console components (ie. base, pedestal, and/or desk).
• Available in either Standard (supported by Base, Pedestal, or Standard Desk) or Deep (supported by Deep Desk only) format.
• Smooth lines and clean edges provide an attractive, contemporary appearance.

• Generally used in combination with other modular console components (ie. base, pedestal, and/or turret).
• Provides an ideal sloped surface for mounting keyboards, switches, indicator lights, and/or dials.
• Open top permits mounting of a turret (usually for CRT applications) or an optional hinged desk cover (providing a flat, sturdy desk surface).
• Available in either Standard (will support Standard Turret only) or Deep (will support Deep Turret only) format.
• Smooth lines and clean edges provide an attractive, contemporary appearance.

• Ideal as a housing for video screens.
• Flexible design provides panel mount or rack mount capabilities for a variety of applications.
• Generally used in combination with other modular console components (ie. base, pedestal, and/or desk).
• Available in either Standard (supported by Base, Pedestal, or Standard Desk) or Deep (supported by Deep Desk only) format.
• Smooth lines and clean edges provide an attractive, contemporary appearance.

• Generally used in combination with other modular console components (ie. base, pedestal, and/or turret).
• Provides an ideal sloped surface for mounting keyboards, switches, indicator lights, and/or dials.
• Open top permits mounting of a turret (usually for CRT applications) or an optional hinged desk cover (providing a flat, sturdy desk surface).
• Available in either Standard (will support Standard Turret only) or Deep (will support Deep Turret only) format.
• Smooth lines and clean edges provide an attractive, contemporary appearance.

• Serves as an economical housing for operator interface applications.
• Provides an ideal sloped surface for mounting keyboards, switches, indicator lights, and/or dials.
• Provides panel mounting capabilities for a variety of applications.
  Generally used as a stand alone enclosure. Possible to put side by side with base on a single plinth (ie. 36" wide consolet with 24" base with terminal all together on a 60" plinth.
• Optional casters (require plinth) allow for a completely mobile, NEMA rated work station.
• Smooth lines and clean edges provide an attractive, contemporary appearance.

• Flexible design provides panel mount or rack mount capabilities for a variety of applications.
• Generally used in combination with other modular console components (ie. another base, terminal, desk and/or turret).
• Available in either single or dual access format.
• Smooth lines and clean edges provide an attractive, contemporary appearance.

• Flexible design provides panel mount or rack mount capabilities for a variety of applications.
• Generally used in combination with other modular console components (ie. another base, terminal, desk and/or turret).
• Smooth lines and clean edges provide an attractive, contemporary appearance.
• Door profiles provide increased strength and are pre-punched to provide mounting options.

• Ideal as a housing for a complete personal computer system including video screen, keyboard and PLC.
• Flexible design provides panel mount or rack mount capabilities for a variety of applications.
• Generally used in combination with other modular console components (ie. base or pedestal). Mounting on base provides extra room for PLC’s and/or printer-paper stands.
• Optional casters (require plinth) allow for a completely mobile, NEMA rated work station.
• Smooth lines and clean edges provide an attractive, contemporary appearance.

• Designed to bolt together in any number of units for maximum flexibility and ease of transportation. The UHDM system consists of a Master enclosure to house the flange mounted disconnect switch and interlocking Slave enclosures which may be added or removed as required. Master enclosure units will accept the following disconnect switches and circuit breakers:

• ABB Controls
• Allen Bradley
• C-H Westinghouse 
• General Electric
• I-T-E Max-Flex™
• Square D

flange mounted variable depth operating mechanism for disconnect switches and circuit breakers.

• The IMET product line provides users with a rugged housing for industrial control and operator interface in        harsh industrial environments.
• Modular design permits joining of units together for large scale and mixed use applications.
• A broad range of industry standard sizes are offered. Units are constructed to imperial dimensions and               hardware sizes, with metric sizing provided for convenient reference.

• The product provides users with a rugged housing for industrial control and operator interface in harsh industrial environments.
• Modular design permits joining of units together for large scale and mixed use applications.
• A broad range of industry standard sizes are offered. Units are constructed to imperial dimensions and hardware sizes, with metric sizing provided for convenient reference.

• The IPC product line provides users with a rugged housing for industrial control, operator interface and computer equipment in harsh industrial environments.
• Modular design permits joining of units for large scale and mixed use applications.
• Increasingly, PC technology is utilized on the factory floor. The PC enclosure provides a secure housing for standard PC components.
• A broad range of industry standard sizes are offered. Units are constructed to imperial dimensions and hardware sizes, with metric sizing provided for convenient reference.

• Designed for indoor use to house controls, instruments and components not requiring oil-tight or dust-tight protection

• Designed for indoor use to house controls, instruments and components not requiring oil-tight or dust-tight protection.
• Door is fastened with a slotted 1/4 turn latch; doors 30” and higher are provided with two latches.
• To remove door, a tool is required to remove the #8 screw which captivates hinge.

• Designed for use as a wiring/junction box.
• Provides protection against rain, sleet, snow and dripping water.

• Designed to house the following safety disconnect equipment:
  • ABB Controls
  • Allen Bradley 
  • C-H Westinghouse
  • General Electric
  • Siemens I-T-E Max-Flex™
  • Square D 

• Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
• Provides a degree of protection from falling dirt, dust, oil and water.
• Available with front access only or both front and rear access.
• A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.

• Designed to accept standard heavy duty oil tight pushbuttons, switches and pilot lights.
• Ideal for wall or surface mounting to provide the necessary control slope.
• Provides protection from dirt, dust, oil and water.

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Heavy-duty construction provides protection from dirt, dust, oil and water. Sloping front control and instrument panels provide an ideal surface for mounting operator controls or instrumentation.
• Interior mounting is provided for with a removable inner panel located on the rear of the basic console.

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Heavy-duty construction provides protection from dirt, dust, oil and water.
• Sloping front control panel provides an ideal surface for mounting operator controls or instrumentation.
• Interior mounting provision on removable inner panels located on the rear and sides of the enclosure.

• Designed for use as a wiring/junction box.
• Provides protection against rain, sleet, snow and dripping water.

• Designed for indoor use to house controls, instruments and components not requiring oil-tight or dust-tight protection.
• Full swing door using butt hinges.
• Through holes in back for wall mounting.
• Bonding stud is provided on the door and a grounding stud is provided on the box.

• The splitter boxes are designed for distribution of up to 600 V (max) service using either 3 or 4 wires.

• The splitter boxes are designed for distribution of up to 600 V (max) service using either 3 or 4 wires.
• Factory installed splitter blocks.
• Smooth, continuously welded seams ground smooth.

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides a degree of protection from falling dirt, dust, oil and water.

• Designed to accept the following dis­connect switches and circuit breakers:
  • ABB Controls
  • Allen Bradley
  • C-H Westinghouse
  • General Electric
  • Siemens I-T-E Max-Flex™ 
  • Square D

flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers.

• Designed to accept the following dis­connect switches and circuit breakers:
  • ABB Controls
  • Allen Bradley
  • C-H Westinghouse
  • General Electric 
  • Siemens I-T-E Max-Flex™
  • Square D

flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers.

• Heavy duty three point latching mech­­anism with heavy duty roller ends is provided for ease of door closing.
• 15" floor stands are welded to the enclosure.

• Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
• Provides a degree of protection from falling dirt, dust, oil and water.
• Available with front access only or both front and rear access.
• A variety of inner panels, rack mounting angles and swing frames are available to provide flexibility in equipment mounting.

• Designed to accept the following disconnect switches and circuit breakers:
  • ABB Controls
  • Allen Bradley
  • C-H Westinghouse
  • General Electric 
  • Siemens I-T-E Max-Flex™
  • Square D

flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers.

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides a degree of protection from falling dirt, dust, oil and water.

• Designed to house the following safety disconnect equipment:
  • ABB Controls
  • Allen Bradley 
  • Cutler Hammer
  • Siemens I-T-E Max-Flex™
  • General Electric
  • Square D

flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers. Cable version for circuit breakers also available.

• Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
• Impressive styling features like hidden hinges, attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
• A wide range of sizes and practical accessories make this product line a complete package.
• For high temperature applications, a gasket retainer may be required, please refer to factory.

• Designed to enclose electrical and/or electronic equipment in wallmount applications where viewing of component operation is necessary while maintaining protection ratings.
• Impressive styling features like hidden hinges, attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
• A wide range of sizes and practical accessories make this product line a complete package.
• For high temperature applications, a gasket retainer may be required, please refer to factory.
• Full view UV resistant polycarbonate window allow maximum viewing area of inner panel.

• Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
• Impressive styling features like hidden hinges, attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.  
• For high temperature applications, a gasket retainer may be required, please refer to factory.

• Designed to enclose and protect multiple wiring junctions from dirt, dust, oil and water.

• Designed for indoor use to enclose controls, instruments, and components which do not require oil-tight or       dust-tight protection.
• Ideal for applications where components may be easily mounted and wired prior to installation of wrapper            and door.