We provide quality epoxy flooring, such as:

 

• Epoxil SL25/MH25: A four-pack epoxy based self-levelling system ideally suited for 1-3mm monolithic floors. It is characteristic of high gloss anti skid and hygienic properties for Pharmaceutical units,food processing areas, Automobile showrooms, Operation theatres and Laboratories.
• Epoxil SL25/MH64: A two-pack epoxy for floor screeds for 3mm and above. This system has rapid setting properties and minimises application time for subsequent top coats. This also sets on moist surfaces.
• Epoxil BC34/MH34: An epoxy binder for broadcast flooring. It is a 3-pack system consisting of coloured aggregates in addition to the resin and hardener.
• Epoxil MC700: A single-pack polyurethane system which can be pigmented and applied as a top coat on epoxy surfaces or PU itself. It is characteristic of high gloss and hardness.
• Epoxil MC500: A single-pack PU used for screeds and broadcast floors. This can also be used as a penetrating sealer for concrete surfaces in active wet and oily conditions.
• Epoxil SL235/MH85: An epoxy system for chemical resistant floors and heavy duty applications.
• Epoxil EPU52/MH52: An epoxy/urethane hybrid self-leveliing system with outstanding abrasion resistance hardness and adhesion to under prepared surfaces. It has the normal high gloss of epoxy floorings with improved flexibility.
• Epoxil WB106: A water based epoxy flooring with breathability characteristics.

 We manufacture and supply a qualitative range of surface coatings, which are formulated from premium quality raw materials that are sourced from reliable suppliers in the country and abroad. Epoxy coatings offer excellent chemical resistance and are extensively used in a wide range of industries for chemical storage, anti-corrosive protection and sterile environments such as pharmaceutical and food processing plants. A major application of these surface coatings, lacquers is in metal containers and drums for packing chemicals and food products as per the requirements of the customers.

	Type	Application
EP-6001 MH-6001	2-pack epoxy system	A Chemical resistant side/seam lacquer for tin containers and internal lining of solvent storage tanks with high chemical and solvent resistance.
EP-5002 MH-5002	2-pack epoxy system	A Chemical resistant side/seam lacquer for tin containers and protective coating for saline water.
EP-491 S	Single pack epoxy lacquer.	A Chemical resistant side/seam lacquer for tin containers with mild chemical resistance.
EP-7000	Stoving epoxy system	A Chemical resistant epoxy phenolic lacquer with excellent chemical resistance.
Epoxil-CT	2-pack epoxy coal tar compound.	Coaltar modified epoxy coating for damp surfaces and metallic structures and concrete reservoirs.
Epoxil-MC-500	1 Pack PU	Water resistant polyurethane primer/barrier coat.
Epoxil-WB 104/MH-104	2-Pack Water based epoxy coating	An ideal coating for walls, floors and all masonry surfaces. Allows breathing and promotes adhesion on porous substrates.
Epoxil-WR7	Single Pack Colourless coating.	Masonry water repellent coating for concrete and porous surfaces allows water-vapour permeability and prevents water ingress.
Epoxil-PU 16	Single Pack Polyurethane	Clear / pigmented elastomeric coating for walls in Pharmaceutical units  and Hospitals. A dense and sheen appearance is Characteristics of this paint.

EP-106 is a modified epoxy tri-functional resin which when cured with conventional hardeners improves thermal resistance of electrical castings and mouldings effectively, thereby upgrading the class of insulation.

Physical Characteristics:

Type	Modified Epoxy Novolac resin- “Functionality –3” approx.
Specific gravity	1.16 –1.17
Solid content (%)	80% in MEK
Viscosity at 25oC	70 – 90 ps
Epoxide equiva;ent	170 – 190
Appearance	Honey coloured viscous liquid

Special features:

• Improved heat resistance Class “C”
• Good peel strength
• Impact resistance
• Binder for mica, glass fabric etc.
• Good chemical resistance

Compatibility:

With all grades of cold and hot curing epoxy hardeners, conventional fillers and flame retardant additives.

Typical properties of epoxy mouldings ( Glass fiber filled) by ASTM test methods.

Moulding qualities	Excellent
Moulding temperatures (OF)	300 – 330 at 300 to 5000 psi
Specific gravity	1.8 – 2.0
Tensile strength (psi)	10000 – 30000
Elongation (%)	4
Compressive strength (psi)	25000 – 40000
Flexural strength (psi)	10000 – 60000
Resistance to heat (oF)	300 – 500 (continuous)
Heat distortion temperature	250 – 400 oC
Volume resistivity	> 1014 Ohms- cm
Dielectric strength	300 – 400 (15.7 KV/mm) (1/8 inch thick V/ ml)
Dielectric constant	3.5 – 5.0
Arc resistance (sec)	120 – 180
Burning Rate	Self extinguishing

Description : A three pack epoxy system made from selected polymers,designed to cure to a resellient and flexible surface.Its outstanding feature is its unique property to regain its normal surface nature after removing the source of impact or indentation.The surface feel is soft and flexible which is ideally suited for heavy load bearing movement without physical deformity to the floor.

Special features: 

• A resellient surface with low surface tension.
• High compressive strength.
• Good abrasion strength.
• Good chemical resistance.
• Good colour retention properties.
• Excellent bonding properties.
• Easy maintenance and cleanability.

Applications :

• Pharmacutical floors.
• Hospital corridors and operation theatres.
• Computer laboratories.
• Automobile garages and showrooms.
• Food processing units.
• Artificial sports turfs.
• Oil installations.

Physical properties :  

Appearance :

Pack A  :  Clear liquid  
Pack B  :  Thin liquid
Pack C  :   amorphous powder: Pigment : as per shade card.

Mixing ratio :
                                 
Pack A:Pack B:Pack C :  2:1:3 parts by weight.

Pot –life:

For 500 gms mass at 25 deg C	35-45 mins.
Touch dry	3.5 – 4.5 Hrs.
Open to use	24 Hrs. at low humidity of 60%.
Full cure	Minimum 7 days.

Specific gravity: 

Pack A :  1.05 – 1.10  
Pack B  :  0.94-0.97
Pack C  :   2.4-2.6

Mixed density  :    1.6 – 1.8 gms/cc
Coverage :    1.6  - 1.7 Kgs / sq.mtr at 1mm thickness.

Packing:

Pack A : 10 kgs
Pack B : 5 kgs
Pack C : 15 kgs

Directions of use  :   Weigh out PackA and mix PackB into it in a clean vessel thoroughly using a mechanical mixer at slow speed. Gradually start addition of the powder until a homogenous mix is attained. A gentle temperature rise indicates complete mixing.Give atleast 3 –4 minutes to achieve this state. Pour the contents into another vessel and pour on the marked area.Spread evenly using a notched trowel and removing air bubles with spike roller.

Surface preparation : Clean the surface using mechanical ads and degreasing chemicals.In case of oil contaminated surfaces, use our special primer, Epoxil – prm..  in two coats. Patch repair the surface where required to a uniform finish before applying Epoxil – FL511.

Cleaning of tools should be done with epoxy thiners only. All handling precautions and directions should be followed strictly.

Description: EPOXIL PU 52 is a two-pack high build, hard wearing polyurethane flooring forming a tough durable finish with anti-microbial and anti-skid properties.It can be cleaned with hot water.

Application areas :  

• Pharmaceutical floors/warehouses.
• Hospitals and Operation theatres.
• Ambulance floors.
• Food processing units / Breweries.
• Testing Laboratories.
• Clean room areas.

Advantages :  

• Low odour.
• Anti-skid.
• Adhesion to wood, concrete and porous surfaces.
• High abrasion resistance.
• Aesthetic appearance.
• Fast setting / return to service.
• Flexible ,withstands impact and temperature variation & humidity.
• Available in shades as per our shade card.

Processsing instructions  :

• Surface preparation methods recommended for concrete should be followed,such as acid etching, solvent degreasing are mandatory.
• Fresh concrete should be cured for 28 days before application.
• EPOXIL- 701PRM primer should be applied by brush and allowed to dry to a tacky state (not fully cured) before application.
• The components of EPOXIL-PU52 should be mixed in a mechanical mixer at slow speed and poured in marked area 2kg per sqmtr/ mm.
• Use of notched trowels and spike rollers to deareate the mix is recommended.
• A dust free environment during application leaves a glossy surface.

Packing   :  

Pack A   :   20 Kgs      
Pack  B   :  5 kgs

Safety instructions :  Epoxil PU52 components are dermatic to skin in the wet state and use of protective clothing is strongly recommended. Inhalation can cause damage and precautions should be taken.This material should be stored away from moisture and heat. Disposal of empty containers should be followed as per the clients directives.

Disclaimer : The above information is based on typical formulation recipes and may vary due to environmental conditions and quality of worksmanship and floor conditions provided at the time of execution.

Description  :   Epoxil – PU 700  is a specially modified anionically stabilized non-yellowing aliphatic urethane dispersion in white base. It has excellent adhesion,wettabtility and barrier film properties,even on wet surfaces of concrete,plaster,metal,plastic,marble and previously painted surfaces.

Applications  :

• Pharmaceutical units (Floors & walls).
• Computer rooms.
• Hospital corridors.
• Automobile work shops.
• Food processing units.
• Industrial shop floors.
• Coastal area buildings.
• Off-shore installations.
• Sub-zero temperature structures.

Outstanding features  :  

• Excellent U.V. resistance.
• Very good abrasion resistance.
• Excellent gloss retention.
• Elastomeric character.
• Good chemical resistance.
• Long term duraility.
• Solvent free,user friendly.

Typical properties :

Weights solids %	45-48
Volume solids %	36
PVC %	18
VOC gms/ ltr	250

Cured film properties  :

Gloss 60 deg	74
Impact resistance(direct)	> 160 in-lb
Flexibility	32 % conical mandrel.
Hardness (Pencil)	3H
Rub test	90 (IPA) , >200 (MEK)

Chemical resistance :  1 hr. soak test  :

10 % ammonia	No effect.
Isopropanol	Minor change in appearance
Bleaching chem	No effect.
Vinegar	No effect.
50 % ethanol/H20	No effect.
Olive oil	No effect.
Syn .enamel	No effect.

We offer a variety of epoxy laminates for bangles and logos, that  find applications in the jewelry and other industries. These are clear epoxy laminates compositions, that provide high glossy finish to various types of bangles, badges, logos and other artificial floral water looks. Our range of lamination is available in accordance with clients' specific demands.

 

• Epoxil 43CL/MH 43:A clear epoxy laminating composition for bangles and logos with a soft feel and high gloss.
• Epoxil 34/MH 34: A clear epoxy laminating composition with a hard glossy finish for Bangles/badges/logos and artificial floral water looks, also know as DOMING RESIN.
• Epoxil 25/MH25: A clear high viscous glossy non-sagging epoxy for special applications in the bangle industry.

We manufacture and export epoxy adhesive - grouting compounds.

 

• Epoxil 34/MH 34: A very low viscosity injectable grout for civil application.
• Epoxil 133F/MH-91: A 2-pack epoxy 100% solid pourable mix used for lining as a crusher backing compound. It gains strength rapidly and very economical too.
• Epoxil 70F/MH 70: A free flowing epoxy compound to seal various types of filter media to metallic frames. A high temperature modification is also available.
• Epoxil 52F/MH 52: A flexible type of sealant for floor tiles, moving joints and concrete expansion joints.
• Epoxil 61/MH 93: An equal volume general purpose adhesive for industrial and domestic repair purposes, with quick setting properties.

We manufacture and provide electrical insulating resins.

 

• Epoxil-106: A single-pack class-H insulating resin for glass mica tapes
• Epoxil-538/MH-85: A cold curing 'F' Class 2- pack epoxy system for FRP application and moulding jobs.
• Epoxil-23/MH-91: Cold setting epoxy potting resin for capacitors and cast insulators.
• Epoxil-56L/MH-92: Hot curing 'F' class epoxy binder for Mica Sheets.

We manufacture and supply modified epoxy resins, also known as epoxxy hardeners.

 

• Epoxil-27/MH-64: A unique fast setting underwater curing epoxy for adhesives, coatings, mortars.
• Epoxil-28/MH-84: A high tack epoxy adhesive for fixing glazed tiles and concrete slabs.
• Epoxil-701/MH-25: A water dispersible epoxy mortar with cementitious modification.
• Epoxil-401: A glossy water based epoxy coating.
• Epoxil-PRM: A common primer for epoxy paints.
• Substitute of common grades of modified epoxies and a range of hardeners tailormade to reduce cost and improve performance of grades commonly available.