Power Products

Designed and developed as per the specifications of our clients our wide range of GPS Master Clocks Model: MC-1 is in wide demand across the globe. These are used for addressing key power and cater to process industry time synchronisation requirements.

Features:

• Model MC-1 is having a duo design that uses DSP for IRIG-B signal generation
• It can provide facility to program the parameters by local PC connection via serial port
• Time zone correction, hour setting, serial data format selection are password protected configurations to avoid unauthorized access
• occupies the size of 19"X12"X3.5"
• supplied complete with all hardware and software required for the installation, including the antenna, antenna mounting kit, 10 meters antenna cable, 3 meters RS-232 cable and 10 meters RG58 co-axial cable
• BNC connector links the antenna to co-axial cable, Model MC-1 provides time synchronization accuracy better than 1 microsecond between distant locations
• Reliable GPS receiver with 12 parallel channel tracking
• Multiple time code output formats
• Front panel display of local time &position
• Electrically Isolated Outputs & Inputs
• Multiple format RS232 serial communication.
• Broadcast function
• Password protected configuration
• No data loss even if GPS is not locked
• Output distribution unit available.

We manufacture a wide range of Remote Time Display Unit Model: TDU- 64 which is a versatile, multi-featured time code driven clock display. Customized as per the specifications of our clients, this unit decodes and displays all versions of serial communication based formats, IRIG-B modulated and TTL time codes.

Features and specifications:

• Serial communication decoding supports NGTS, NMEA and T-Formats
• IRIG-B decoding supports the 1 kHz modulated format (B1) and the TTL format (B)
• IRIG-B date decoding is supported for the IEEE 1344 standard
• It retains time during loss of power and absence of time code. Automatic detection of time code type and date encoding is also available
• +12 to -11 hour time zone offset setting
• half hour offsets
• programmable time and date when time code is absent
• The 100mm display can be viewed from a distance of over 40m
• TDU-64 is ideally suitable to many application where one wishes to have sight of the time from long distance
• The rugged aluminum case makes TDU-64 ideal for demanding industrial environments. Flush LED display of TDU-64 offers a wide angle viewing comfort
• Used as large process display that accepts inputs either in TTY current loop, BCD format or serial port devices like PLC/ RTU/ IEDs
• This extends its application for factory and process automation requirements
• digit time display unit
• 100mm digit height
• Rack/Wall/Panel/Free stand mounting options
• Real time clock in minutes, hours & seconds
• NGTS/NMEA/T-format/IRIG-B input interface
• +12 to -11 hour time zone of set
• Retains time during loss of power/time code
• Large display for easy viewing from a distance.

Masibus manufactures high quality power transducers of various types to help you manage and conserve electricity. All electrical parameters such as current, voltage, active power, reactive power, energy, frequency and power factor can be accurately measured. A corresponding linearized signal is then transmitted for various applications such as SCADA, S/S automation, energy measurement,remote indication, check metering etc.
Power transducer series offers an economical and accurate means of current & voltage measurement on systems where the waveform is a pure sine wave.
Transducers are calibrated to true RMS value of the sine wave. They can also be used with distorted waveforms where high accuracy is not required


Features:

• High accuracy class
• 0.25%
• Confirms to IEC
• 60688
• Power transducers
• for all requirements
• Excellent long term
• stability
• Low burden
• Transient protected
• Both 1-ph & 3-ph
• versions available
• Good isolation &
• impulse resistance
• Minimum ripple at
• the output
• Fast response
• Full power factor
• range operation
• ABS DIN rail
• mounting

Features:-

1) Maximum up to 128 point capability in increment of 64 (2 scanner card)

2) 1 millisecond resolution.

3) 10 microseconds scan time.

4) Sequential memory of 220+ event messages per 64 point scanner card.

5) Six RS-232 port

6) IRIG-B for time synchronization.

7)Windows based RCW software for analysis.

 

About Sequential Event Recorder (Model SER 128+):-

 

The Model SER 128+ is a complete Masibus event recording system for small-scale monitoring applications. Its extensive communication facilities make it especially valuable as front end instrumentation for offloading to higher level hosts via modem devices. At the same time, the Model SER 128+ serves as a local indication and recording source for ongoing events data.

 

The system is designed in building block fashion for configuring the required capacity with room for future expansion. Its capacity ranges in 64 point increments from a minimum of 64 point increments from a minimum of 64 points (one scanner card) up to a maximum of 128 points for a single cage system.

 

The Masibus Model SER 128+'s sequential memory is capable of queuing over 220 event message per 64 points on each scanner card. The distribution of memory on separate scanner cards in 64 point increments ensures that the failure of individual cards will not destroy the system's entire memory bank. In addition, the Model SER 128+ features event storage for analysis purposes in the form of a circular historical buffer, whose design is unique in events recording instrumentation. It stores the last2000 event captured, which can be easily accessed for pre-and post-fault analysis. By using a keyboard entry, a list of all events in the buffer of events occurring since the last request can be requested, which is particularly useful in unmanned applications.

 

In all, there are six different RS232C ASCII output ports available on the Model SER 128+, with a seventh port configured to accept an IRIG-B clock synchronization input.

 

Inherent reliability and security ensure the integrity of events data.

 

A crystal controlled clock that can be synchronized to the AC line, hourly input line, IRIG-B, or satellite receiver. There is battery back-up for both date and time and historical buffer. Finally, a programmable security code is available to limit access to the system.