Maxima Motion & Controls Private Limited

Material : Polyamide, Bearing hub
Weight :

0.03 kg
Description :

2 deep groove ball bearings
F=150 N

Use for slot 8 profile
Order No :

ACC-Castor-8

Material : Pressure Die-Cast Aluminium
Weight :

0.30 kg
Description :

JE-30CR Joint-8: Corner joint for PS3030CR-8 profile

JE-40CR Joint-8: Corner joint for PS4040CR-8 profile

Comes with cover
Order No :

JE-30CR Joint-8
JE-40CR Joint-8

Material : Polyamide
Description :

End cover of profile
Thickness: 4mm
Order No :
Black Color Light Grey

ACC-EC2020-6
-

ACC-EC2040-6
-

ACC-EC3030-8


ACC-EC3030G-8

ACC-EC3030CR-8
-

ACC-EC3060-8
-

ACC-EC4040-8


ACC-EC4040G-8

ACC-EC4040CR-8


ACC-EC4040CRG-8

ACC-EC4080-8


ACC-EC4080G-8

ACC-EC8080-8
-

ACC-EC4545-10


ACC-EC4545G-10

ACC-EC4545CR-10
-

ACC-EC4590-10
-

ACC-EC9090-10
-

ACC-EC4560-10
-

ACC-EC6060-10

Material : Black coated steel
Weight : 0.44 kg
Description :

Fix construction to the floor. A hole for floor dowel can be made by slot adjusting the bracket

Used with hammer head screw JE-HH8x20-10

Used for PS4545－10 series profile
Order No :

JE-FB90x210-10

Material : Pressure Die-Cast Aluminium
Weight : 0.89 kg/m
Description : For simple, right angled and power-lock conection.

Used with button head screw M4x8, rhombus nut JE-RN4-6, 4 flash washer.

Used for PS2020-6 series Profile
Order No : JE-GE2020-6

Material : Casted GD-Zn
Weight : 0.02 kg
Description : For simple, right angled and power-lock conection.

Usedwith button head screw M6x12, rhombus nut
JE-RN6-8/3030, or lozenge nut JE-LN6-8.

Used for PS3030-8 series Profile
Order No : JE-GE2028-8

Material : Pressure Die-Cast Aluminium
Weight : 0.05 kg
Description : For simple, right angled and power-lock conection.

Used with hammer head screw JE-HH8x20-8.

Used for PS4040-8 series Profile
Order No : JE-GE4040-8

Material : Pressure Die-Cast Aluminium
Weight : 0.15 kg
Description :

For simple, right angled and power-lock connection

Used with hammer head screw JE-HH8x25-10

Used for PS4545-10 series and PS6060-10 profile
Order No :

JE-GE4288-10

Material : Pressure Die-Cast Alumin
Weight :

0.06 kg
Description :

For simple, right angled and power-lock connection

Used with hammer head screw JE-HH8x25-10

Used for PS4545-10 series and PS6060-10 profile
Order No :

JE-GE4342-10

Material : Zinc Plated Steel
Description : Slot-8mm threading cutting screw with flange nut M8 size12

Used with gusset element JE-GE4040-8

Used for PS4040-8 series profile
Order No : JE-HH8x20-8

Material : polyamide
Weight :

0.04 kg
Description :

For PS3030-8 use with:
JE-BH6x12, JE-RN6-8/3030

For PS4040-8 use with:
JE-BH6x16, JE-RN6-8/4040 or
JE-CS8x16, JE-HRN8-8/4040

For PS4545-10 use with:
JE-CS8x16, JE-RN8-10
Order No :

ACC-Handle

Material : Polyamide
Weight :

0.008 kg
Description :

Use for PS2020-6 series Profile

Use with C'sunk screw M4x8 and rhombus nut JE-RN4-6
Order No :

ACC-H2020-

Material : Polyamide
Weight :

0.08 kg
Description :

Use for PS3030-8 profile

Use with C'sunk screw M6x16 and rhombus nut JE-RN6-8/3030
Order No :

ACC-H6140-8

Material : Zinc Die-Cast Steel
Weight :

0.06 kg
Description :

Used to connect profiles at right angle

Replacing brackets for aesthetic appearance 2xM8 set screw supplied
Used for PS4545－10 profile, Type A and Type B
Order No :

JE-IB38x32-10/A
JE-IB38x32-10/B

Material : Clear Anodised Aluminium
Weight : 0.19 kg
Description :

JE-Joint Connector-8 supplied with 4 pieces M6 set screw, to be used in PS4040-8 series profile,

JE-Joint Connector-10 supplied with 4 pieces M8 set screw, to be used in PS4545-10 series profile.
Order No :

JE-Joint Connector-8
JE-Joint Connector-10

Material : Pressure Die-Cast Aluminium
Weight :

0.54 kg
Description :

For angled joint or rotary profile arm,

Used for PS4545-10, PS4545L-10 profile,
Order No :

JE-KJ4545-10

Material : Pressure Die-Cast Aluminium
Weight :

0.54 kg
Description :

For angled joint or rotary profile arm,

Used for PS4545-10, PS4545L-10 profile,
Order No :

JE-KJ4545-10

(H) (W) (X) Load/pc
Dia 50 67 20 25 50 kg
Order No :

2470-UAK-050-P30
With Brake

2475-UAK-050-P30

User Servo Motor

• S: Synchronous motor
• A: Asynchronous motor
• M: Main spindle motor

Motor frame size

03, 04, 05, 06, 07

Lenght in mm

Material : Polyamide (M6 square nut: Steel)
Weight : 0.03 kg
Description :

ACC-MB94001-8
used for PS3030-8 series Profile A1= 8mm A2=2.2mm

ACC-MB94002-8
used for PS4040-8 series profile A1= 12 mm, A2=4.5mm

ACC-MB94004-10
used for PS4545-10 series profile A1= 9 mm A2=6.0 mm

ACC-MB94100 Spacer Spacer Thickness=3 mm
Order No :

ACC-MB94001-8
ACC-MB94002-8
ACC-MB94004-10
ACC-MB94100

The Rotary Indexing Rings of the NR series have the following special features:

• High indexing accuracy as locking feature is positioned on the far outside
• Large centre hole
• Flat design
• High dynamics as drive is directly outside on the rotating ring
• Simple control units - identical to control of the familiar NC types
• Rotating ring, bored to customer's drawing specifications, mandatory element of scope of supply

Material : Zinc Plated Steel
Description :

For simple, right angled and power-lock con­nection
Used for PS4545-10 series, PS6060-10 profile

Length: 60, 80, 110
Order No : JE-CS 12x60 (or 80,110)

Material : Stainless Steel
Weight :

0.2 kg
Description :

Floor mounted type for hold mounting to floor with Diameter 10 mm hole
Order No :

FM-SS65M10x100
FM-SS65M12x100
FM-SS65M12x150
Floor Mounted Type

FM-SSF65M10x100
FM-SSF65M12x100
FM-SSF65M12x150

Material : Zinc Plated Steel
Weight : 0.015 kg
Description : Together with button head screw M8x20.

For simple, right angled and power-lock conection.

Used for PS4040-8 series Profile.
Order No : JE-SJT8-8

Material : PVC Extrude
Weight : 0.04 kg / m
Description :

Standard length: 2 m
Black color

ACC-US2000-8 use for slot 8 series profile
ACC-US2000-10 use for slot 10 series profile
Order No :

ACC-UP2000-8
ACC-UP2000-10

The Host Controller is the interface between modules and PC. It provides its own intelligence for managing the whole bus system without the processing power from the PC.

This module is the heart of the whole system. It performs the coordination between the PC and the other modules. Modules connected to the network will be automatically detected, and reported to the PC.

It is the base module of the whole network, and the PC must always be turned on to keep the network alive.

This module receives control signals from dig-ital field devices (sensors, switches and etc). External loads can also be switched via its digital outputs from the control system. Each input point incorporates a noise or debounce rejection filter. The filter time constant can be freely programmable. All input points contains an optocoupler which provides electrical isolation between the module and the field devices. Different modes can be selected to perform special functions like fastcounting. All input point statuses are indicated by LEDs. All the output points are electrically isolated through the use of optocouplers. Small inductive loads (relays) can be connected directly without external protection. Different modes can be selected to perform special functions like one-shot pulse. All output point statuses are indicated by LEDs.

This module is an intelligent closed loop precision servo motion controller for standard
industrial current or speed motor drives.

Input and output signal statuses are indicated by LEDs.

This module is a mixed I/O module that receives control signal from analogue field devices (temperature sensor, level sensor, etc) as well as digital field devices (sensor, switches, etc). External analogue loads can also be set via its analogue outputs and external digital load can be switched via its digital outputs from the control system. Each input point incorporates a noise or debounce rejection filter. The filter time constant can be freely programmable. All digital input points contains an optocoupler which provides electrical Isolation between the module and the field device. Different modes can be selected to perform special functions like fast-counting. All digital input point statuses are indicated by LEDs. All the digital output points are electrically isolated through the use of optocouplers. Small inductive loads (relays) can be connected directly without external protection. Different modes can be selected to perform special functions like one-shot pulse. All digital output point statuses are indicated by LEDs.

I-step Motor is a hybrid 2 Phase step motor providing high performance output and reliability. This series comes in standard Nema 23 & Nema 34 size.

This motors are matched with the i-step series of drives and indexer, in many applications, requiring speed and torque.

I-step motors are also being used with various industry standard 2 Phase driver, delivering high standard results in demanding applications.

Material : Polyamide
Weight : 0.03 kg
Description :

Used for tying cables with strap
Order No :

ACC-UCBB

Material : Casted GD-Zn
Weight : 0.025 kg
Description : Suitable for profiles which needed to be Moved subsequently.

For PS3030-8 series profile:
use with socket head cap head screw M6x25 & half round nut
JE-HRN6-8/3030.

For PS4040-8 series profile:
use with socket head cap head screw M8x30 & half round nut
JE-HRN8-8.

For PS4545-10 series profile:
use with socket head cap head screw M8x30 & rhombus nut
JE-RN8-10.
Order No : JE-UJT16-8
JE-UJT20-8

Material : Pressure Die-Cast Aluminium
Weight : 0.10 kg
Description :

Designed for connecting profiles at angle

Suitable for constructing ergonomically adjustable working aids such as material support and shelves

Used for PS4545-10, PS4545L-10 profile
Order No :

JE-AB4343-10

Material : Black coated steel
Weight : 0.31 kg
Description :

Connecting profiles at right angle, suitable for supporting frames or to attach slides

Used with hammer head screw JE-HH8x20-10

Used for PS4545－10 series profile
Order No :

JE-AB100x100-10

Material : Zinc Plated Steel
Weight :

0.004 kg
Description :

Economically used in securing light weight construction,

JE-LN4-6 used for PS2020-6 series profile.

JE-LN5(or 6)-8 used for PS3030-8 or PS4040-8 series profile.
Order No :

JE-LN4-6
JE-LN5-8
JE-LN6-8

Material : Zinc Plated Steel
Weight : 0.009 kg
Description :

Sliding block with large supporting surface to hold high forces
Must be installed into T-slot from an open end of extrusion profile
Used for PS4545-10 series profile
Order No :

JE-SB5-10
JE-SB6-10
JE-SB8-10

(H) (W) (X) Load/pc
Dia 75 104.5 30 41.0 80 kg
Dia 100 132.5 28 40.5 100 kg
Dia 125 158.5 29 39.0 120 kg
Dia 150 187.0 35 46.5 140 kg

Material : Zinc Plated Steel
Weight :

0.004 kg
Description :

JE-RN3 (or 4)-6 used for PS2020-6 series profile

JE-RN4 (or 5, 6)-8/3030 used for PS3030-8 profile

JE-RN5 (or 6)-8/4040 used for PS4040-8 series profile

JE-RN4 (or5, 6, 8 )-10 used for PS4545-10 series profile
Order No :

JE-RN3-6
JE-RN4-6
JE-RN4-8/3030
JE-RN5-8/3030
JE-RN6-8/3030
JE-RN4-8/4040
JE-RN5-8/4040
JE-RN6-8/4040
JE-RN4-10
JE-RN5-10
JE-RN6-10
JE-RN8-10

Material : Zinc Plated Steel
Description :

General purpose

BH: Button head screw
CS: Socket cap screw
C'sunk: Counter sunk screw

Length: M4x8,
M5x10,12,16,20
M6x10,12,16,20,25,30
M8x12,16,20,25,30
Order No :

JE-C'Sunk4x8
JE-C'Sunk6x12 (or 16,20)
JE-C'Sunk8x20
JE-BH4x8
JE-BH5x10 (or 12,16,20)
JE-BH6x10 (or 12,16,20,25,30)
JE-BH8x12 (or 16,20,25,30)
JE-CS4x8
JE-CS5x10 (or 12,16,20)
JE-CS6x10 (or 12,16,20,25,30)
JE-CS8x12 (or 16,20,25,30)

Material : Zinc Plated Steel
Description :

For simple, right angled and power-lock con­nection
Used for PS4545-10 series profile
Order No : JE-BH12x30-10

Material : Pressure Die-Cast Aluminium
Weight : 0.001 kg
Description :

Light duty nut
Used for PS4040-8 series profile
Order No :

JE-TN4-8
JE-TN5-8

Material : Polyamide Magnetic
Weight : 0.05 kg
Description :

Plastic case magnetic lock supplied with head screw M5x6

For PS3030-8 use with:
JE-CS6x16, JE-RN6-8/3030

For PS4040-8 use with:
JE-CS6x20, JE-RN6-8/4040 or
JE-LN6-8

For PS4545-10 use with:
JE-CS6x20, JE-RN6-10
Order No :

ACC-MGL

The Rotary Indexing Tables of our TC series have the following advantages:

• Robust design
• Smooth, jerk and impact free motion
• High load capacity
• Short switching times
• Long service life
• High degree of reliability
• Simple control

ial :
Tool Slider Snap Hook

Nylon Black
Zinc Plated Steel
Weight :
Tool Slider Snap Hook

0.01 kg
0.03 kg
Description :

Use for overhanging over profile construction
Order No :
Tool Slider Snap Hook

ACC-TS93001
ACC-TSSH