|
Condition Monitoring Equipment
|
We use latest technology and sophisticated machines to offer wide range of industrial equipment that include condition monitoring equipment. Our engineering accessories are manufactured from qualitative raw material and are known for their excellent performance and durability. We also fabricate our products in different specifications as per the clients' requirements. Our wide gamut of equipment includes bearing analyzer, electric motor checker, analog electric motor checker, portable motor checker, digital motor checker, vibration meter etc.
|
| Analog Electric Motor Checker |  | Item Code:EMC25 We offer a wide range of electric motor checker (EMC25) which is a portable diagnostic tool and is widely used for rapid checking of electric three-phase machines. Any electrical fault could lead to inefficient operation or tripping of overloads, reduced machine performance. In such cases EMC-25 is a perfect tool for detecting the fault without dismantling the equipment. These electric motor checker is also used for quality checking of stored motors before they are being installed.
Having three separate operating modes, these can measure different types of fault caused by:
- Faulty insulation
- Open circuits
- Loose connections
- Short circuits
- Rotor defects
While installation, motor is tested with a high voltage of 500V DC supplied by the instrument and possess following specifications:
Technical Specifications:
Insulation Resistance ± 5%
| 0-20 Megohms at 500 VDC, max.
current 0.25mA
| Resistance ± 2%
| 0-60 ohms in 6 ranges (0.2 ohms
F.S.D. in range 6
| Inductance ± 2%
| 0-300mH in 6 ranges (1mH F.S.D. in
range 6)
| Operating Temp. range
| 0 - 55oC
| Size
| 220x130x70
| Weight
| 1000gms (Approx.)
| Power
| 1.5V x 6AA size cells
|
| | Send Business Enquiry |
| Digital Motor Checker | | Item Code:EMC28 We offer precisely engineered range of digital motor checker
EMC 28 which is available with three separate operating modes and used to
measure different types of faults such as:
- Faulty
insulation
- Open
circuits
- Loose
connections
- Short
circuits
- Rotor
defects
Further, this is a portable diagnostic tool that is widely
used in electronic industry for rapid on - site checks of electric motor and
other three - phase machines. These also detect any electrical fault in the
motors that may lead to reduced machine performance, inefficient operation or
tripping of overloads. The motor insulation is tested with a high voltage of
500V DC which is supplied by the instrument.
These machines are simple to operate possessing a shock
proofed rubber body and fabricated with stainless band and are used to measure:
- Insulation resistance (IR) measurement
- Resistance measurement
- Inductance measurement
- Identify open and short circuits / loose
connections in a winding coil
- Identify
inter return shorts
- Detect
rotor bar problems without dismounting the rotor
- Inductance
of the winding with respect to different positions for rotor for
detecting blow holes or cracks in the rotor bars
Specifications:
Insulation
|
Resolution
|
0 - 200 M Ohms at 500 V DC ± ( 2% 1digit)
|
0.1 M Ohms resolution
|
0 - 2000 M Ohms at 1000 V DC ± ( 2% 1digit)
|
0.1 M Ohms resolution
|
|
|
Resistance:Range
|
Resolution
|
0 - 200 mili ohms
|
0.10 mili ohms
|
0 - 2 Ohms
|
0.001 ohms
|
0 - 20 Ohms
|
0.01 ohms
|
0 - 200 Ohms
|
0.10 ohms
|
|
|
Inductance:Range
|
Resolution
|
0 - 2 MH
|
0.001 MH
|
0 – 20 MH
|
0.01 MH
|
0 -200 MH
|
0.1 MH
|
|
|
Features
|
Specification
|
Display
|
3 ½ LCD
|
Low battery Indication
|
Yes
|
Operating Temp. Range
|
0- 55ºC
|
Size
|
210 x 125 x 65
|
Weight
|
980 g (approx)
|
| | Send Business Enquiry |
| Digital Motor Checker | | Item Code:EMC38 We offer a wide range of digital motor checker (EMC 38) which
is used to detect any electrical fault that may lead to reduced machine
performance, inefficient operation or tripping of overloads. This equipment is
advantageous over conventional checkers as it does not require dismantling of
machine and is used for:
- Insulation resistance (IR) measurement
- Resistance measurement
- Inductance measurement
- Identify
open and short circuits / loose connections in a winding coil
- Identify
intertern shorts
- Detect
rotor bar problems without dismounting the rotor
- Inductance
of the winding with respect to different positions for rotor for
- Simple
operation, accurate & quick assessment of motor condition
- To
check quality and condition of motors that have to be installed
Equipped with three separate operating modes, this machine
is used to measure different types of faults such as like fully insulation,
open circuits / loose connections, short circuits and rotor defects. Motor
insulation is tested with a high voltage of 500V & 1000V DC supplied by the
instrument and it consist of some standards accessories such as Test leads --1
set , Shoulder strap, Carry case, cells 6nos. The machine is also
available with rechargeable cells and charger optional accessories.
Manually and calibration certified, this equipment is known
to possess following technical specifications:
Insulation
|
Resistance
|
0
- 200 M Ohms at 500 V DC ± ( 2% 1digit)
|
0.1
M Ohms resolution
|
0
- 2000 M Ohms at 1000 V DC ± ( 2% 1digit)
|
0.1
M Ohms resolution
|
|
|
Resistance:Range
|
Resolution
|
0
- 200 milliohms
|
0.10
milliohms
|
0
- 2 Ohms
|
0.001
ohms
|
0
- 20 Ohms
|
0.01
ohms
|
0
- 200 Ohms
|
0.10
ohms
|
|
|
Inductance:Range
|
Resolution
|
0
- 2 MH
|
0.001
MH
|
0
– 20 MH
|
0.01
MH
|
0
-200 MH
|
0.1
MH
|
0
- 2000 MH
|
1
MH
|
|
|
Features
|
Specifications
|
Display
|
3
½ LCD
|
Low
battery Indication
|
Yes
|
Operating
Temp. Range
|
0-
55ºC
|
Size
|
210 X 125 X 60 mm
|
| Weight |
1000 g (approx) |
| | Send Business Enquiry |
| Vibration Meter | | Item Code:VIB-30-Plus Precisely engineered, our range of Vibration Meter VIB-30
Plus is a simply designed tool for preventive maintenance and is manufactured
in compliance with ISO standards. It is a perfect tool for condition monitoring
which is a basic need for need maintenance.
Features of product are:
- Pocket
size and Light weight
- M
sealed membrane keypad
Technical Data:
Measuring Range
|
0.1
to 199.9 mm/s RMS , PEAKVelocity |
Resolution
|
0.1mm/s
|
Accuracy
|
/-
( 2% 0.1 mm/s )
|
Frequency
Range
|
10
to 1KZ
|
Display
|
LCD
|
Back
Light
|
Yes
|
Auto
Off
|
Yes
|
Battery
Low Indication
|
Yes
|
Power
Supply
|
9V
- 6F22
|
Weight
|
200gms
|
Accelerometer
|
Piezo
electric type
|
Standard
Accessories:
- Accelerometer
- Magnetic Base
- Hand- held Probe
- Cable
- Manual
- Battery
- Calibration Certificate
- Carry bag
| | Send Business Enquiry |
| Vibration Tester | | Item Code:VTAC-50 We offer precisely engineered range of Vibration Tester
VTAC-50 that are designed in accordance with ISO recommendation 2372 and is a
perfect tool for an overall assessment of machine condition.
It comprises of a microprocessor which is a combination of
the function of a vibration tester and laser tachometer. It is a useful tool
for maintenance personnel as it can monitor all significant aspect of
mechanical machine condition during a single inspection round.
These are used
to:
- Check
the operating condition of preventive maintenance
- Monitoring
General machine condition which includes the effect of structural
looseness, misalignment and out - of - balance on machine working order to
avoid routine replacement of serviceable bearings
- Detect
impeding problems in time for planned repair and replacements, avoiding
both breakdowns and unnecessary production stops
Requiring few input data, this instrument allows an instant
interpretation of machine condition and
includes the supply of the following:
- Direct
indication of machine vibration condition in terms of good - reduced - bad
- Digital
display of vibration severity
- Non-contact
measurement
Technical Data:
| Velocity measuring range |
0.1 to 100mm/s, RMS |
| Resolution |
0.1 mm/s |
| Accuracy |
/-0.1%( 2% of reading) |
| Laser tachometer measuring range |
10 to 20000 rpm |
| Measuring distance |
10 feet |
| Resolution |
1rpm |
| Accuracy |
/-(1rev 0.1% of reading) |
| Temperature range |
0 to 50C |
| Power |
9V - 6F22 |
| Size |
196x100x40mm |
| Display |
LCD (4X16 characters) |
| Back Light |
Yes |
| Auto Off |
Yes |
| Keypad |
Sealed membrane |
| Battery Low indication |
Yes |
| Casing |
ABS |
| Weight |
680 gms (approx) |
| | Send Business Enquiry |
| Vibration Tester | | Item Code:AVD-80 Designed and developed as per the specifications of our
clients, our wide range of vibration tester (AVD-80) is a diagnostic tool for
preventive maintenance and is recommended with ISO standards.
Need based maintenance is the latest trends of the industry
and involves low maintenance costs and optimum life machinery. Condition
monitoring is basic need for need maintenance and our instrument is a perfect
tool.
This
instrument is used to measure:
- Vibration
measurements (in terms of RMS velocity in mm/ss Pk-Pk)
- Acceleration
in m/s2 RMS
- Velocity
in mm/s, RMS, Pk-Pk
- Displacement
in mm, RMS, Pk-Pk
Technical Data:
Displacement Measuring Range
Acceleration Measuring Range
Velocity Measuring Range
Resolution
Accuracy
Power Supply
Display matrix LCD
Back
Light
Auto
Off
Battery low indication
Weight
Vibration
Transducer
|
0.1 to 3000um pk-pk,RMS
0.1 to 199.9 m/s2 Peak -PK, RMS
0.1 to 199.9 mm/s RMS, PK-PK
:0.1mm/s
or - (2% 0.1mm/s)
9V - 6 F22
2x8 Dot
Yes
Yes
Yes
200gms
Piezo elctric type Accelerometer
|
The instrument is also available with following standard
deliveries:
- Accelerometer
(Vibration Transducer)
- Magnetic
Base
- Hand-held
probe Cable
- Battery
- Manual
Calibration Certificate
- Carry
bag
| | Send Business Enquiry |
| Vibrometer | | Item Code:VIB-40 Our product range also comprises of vibrometer (VIB-40) which
is designed in confirmation with ISO recommendation 2372 and is a simple diagnostic
tool for preventive maintenance.
It is an instrument used for condition
monitoring which is a basic need for need based maintenance and possess
following features:
- Pocket
size
- Easy
to use
- Economical
- Simple
vibration measurement in terms of RMS velocity in mm/s.
Peak and Acceleration in mm/s, peak
These are also available with standard delivery:
- Accelerometer
- Magnetic
Base
- Hand-held
probe
- Cable
- Battery
- Manual
- Manual Certificate
- Carry
bag
Technical Data:
| Acceleration Measuring RANGE |
0.1 to 200 m/s2 RMS , Peak |
| Velocity Measuring Range |
0.1 to 200 mm/S RMS, Peak |
| Frequency Range |
10 to 1000HZ |
| Rosulution |
0.1 mm/s |
| Accuracy |
or - ( 2% 0.1 mm/s) |
| Power Supply |
9V 6F22 |
| Display |
LCD |
| Back Light |
Yes |
| Auto Off |
Yes |
| Batter Low Indication |
Yes |
| Weight |
200gms |
| VibrationTransducer |
Piezo electric type Accelerometer |
| | Send Business Enquiry |
| Bearing Condition Analyzer | | Item Code:110 We manufacture a wide range of Bearing Condition Analyzer 110 which is a portable Micro Processor based diagnostic tool for comprehensive condition analysis of rotating machinery. Preventive maintenance is necessary in objective measurements of machine condition and our bearing analyzer is a single and easy to use instrument for analyzing bearing condition.
These bearing analyzer is the best instrument for periodic monitoring of bearing conditions and replaces the bearing at the right finite without influencing the production efficiency.
Our bearing analyzer is widely used for:
- Mechanical condition of bearings
- Lubrication condition and damage severity readings for rolling bearings
- Direct radiccation of machine condition in terms of good - reduced - bad
Technical specifications of our bearing analyzer are:
- Measuring range : 0 to 100dB
- Temperature range: 0degreeC to 50degreeC
- Display : 16x4 line Dot Matrix LCD
- Keypad: Sealed membrane
- Auto off
- 9v battery
| | Send Business Enquiry |
| Bearing Condition Analyzer | | Item Code:BVT-111 Our precision engineered range of Bearing Condition Analyzer
BVT-111 is fabricated using advanced technological development and is checking
tool for comprehensive condition analysis of rotating machinery.
These are used
by maintenance personnel for objective measurements of machine condition as a
reliable base for preventive maintenance and used to:
- Vibration
severity according to ISO recommendations.
- Analyze
bearing condition
- Check
rotational speed
It is used for periodic monitoring and bearing condition and
thus replaces the bearing at the right time without influencing the production
efficiency.
These are used for:
- Mechanical vondition of bearings
- Lubrication
condition and damage severity readings for rolling bearings
- Non -
contact measurements of rotational and peripheral velocity
- Vibration
severity measurements according to ISO recommendations
Technical specifications of our instrument are:
Bearing Tester Function
|
|
Measuring range
|
0 to 99dBpv
|
Resolution
|
1 dBpv
|
|
Vibration Tester Function
|
|
Measuring Range
|
0.1 to 99.9mm/s RMS
|
Resolution
|
0.1 mm/s
|
Accuracy
|
/- (2% 0.1 mm/s)
|
|
Laser Tachometer Function
|
|
Measuring range:
|
10 to 20000 RPM
|
Measuring Distance:
|
10 feet
|
Resolution:
|
1 rpm
|
Temperature range:
|
0oC to 50oC
|
Display
|
4x16 line Dot Matrix LCD
|
Keypad:
|
Sealed membrane
|
Auto Off
|
Yes
|
Back Light
|
Yes
|
Standard delivery:
- Bearing
probe
- Head
Phone
- Accelerometer (Magnetic Base, Hand-held probe, Cable)
- Laser
Tachometer Probe
- Reflecting
Tape pad
- User
Manual
- Calibration
Certificate
- Battery
9V
- Carry
Case
| | Send Business Enquiry |
|
|
© MCM Instruments. All Rights Reserved (Terms of Use)