Milling And Grinding Accessories

For  Machinning Centre And Milling Machine

• Flame Hardened Bed.
• Accuracy in Parallelism & Squareness within 0.02 mm
• Hardened Bed and Jaws maintain accuracy for long
• Unbreakable ductile iron cast body
• No work piece tilt after clamping
• All parts interchangeable and available as spares
• Tenons and tenon slots provided for effortless trueing of vice on machine table
  

TOOLFAST’ Edge Finder is used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling or jig boring machine tables.

Application:

Edge finder is used for location of edges, shoulders, grooves etc. of work pieces kept on machine table with respect to the
machine spindle. Shank of the Edge Finder is held in the collet or chuck and work table is traversed to cause the rotating tip of the edge finder make contact with the edge of the work piece to be located. Once the rotating tip comes in contact with the work piece, work table is further traversed so that the rotating tip shifts to a concentric position with respect to the shank. Now any movement to "off centre" will cause a distinct 'wobble'. At this point, the distance from the work edge to the centre of machine spindle is equal to half the diameter of the tip of the edge finder. Available in single & double ended tip. In double ended tip, Edge Finder can be held from both ends and both the tips of two different sizes can
be used for edge finding.

Shank and tip of the edge finder are coupled together with the help of an internal spring for independent rotation of both. It is hardened and accurately ground all over to ensure repeatability of work location within 0.01 mm.

‘TOOLFAST’ Grinding Vice - screw type is also a precision machine vice. Body & jaw made of tool steel, hardened, tempered & precision ground.

• Hardened & Tempered to 52 - 56 HRC.
• All sides Parallelism & Squareness within ± 0.005mm.
• Inspection certificate is furnished.

‘TOOLFAST’ Precision Sine Vice is used to obtain precise angles by means of gauge blocks. Apart from its use on milling and grinding machine, this Sine Vice can also be used as a reference for inspection.

• All Hardened & Tempered to 52 - 56 HRC.
• All side Parallelism & Squareness within ± 0.005mm.
• Centre distance of rollers within ± 0.005mm.
• Inspection certificate is furnished.

‘TOOLFAST’ Steel V-Blocks are made of tool steel, hardened, tempered & precision ground on all sides. These are supplied in matched pairs having both sides ‘V’ with one clamp.

• Unbreakable Steel Clamp.
• All Hardened & Tempered 52 - 56 HRC.
• Parallelism & Squareness of all faces & 'V' within ± 0.005mm.
• Inspection certificate is furnished.

‘TOOLFAST’ Magnetic V-Blocks are precision ground V-Blocks with high power magnets. Accurately fitted magnet ensures easy movement of knob. Available in single as well as matched pairs.
These V-blocks have main holding 'V' and bottom face fitted with hardened steel plates having hardness 52-56 HRC.

• Parallelism & Squareness of all faces & 'V' within ± 0.005mm.
• Most suitable for inspection and tool room applications.
• Inspection certificate is furnished
  

HIGH PRECISION TOOL MAKERS VISE Hardness:HRC54o-58o Squareness: Within0.003m/mVL10 mini tool maker vise can be applied for precise process on bigger vises, and it can be used on EDMS and grinding machines.

Refer to the attached PDF for more details.

Most suitable for machining centre or milling machine all steel construction hardened and ground hrc60

features:

• high precision and gang operation
• pull down easy to change jaws
• unlimited longevity
• space saving design
• no "wear" construction
• unlimited clamping range

refer to the attached pdf for more details.

• Universal rotary table
• Collet chuks / Taper holders / Face mill holders / Side lock holders
• Boring and facing heads
• Universal sine vise
• Punch grinder
• Radius and angle dresser
• Tool tightening fixtures
• Universal magnatic stand
• Quick action drill vise

And many more.....