CNC Vertical Machining Centers (VMC) :

Milltronics has designed and manufactured quality CNC machines for the metal cutting industry for over 30 years. Milltronics markets its 50+ diverse product models under three divisions: Milltronics CNC Machines, Partner Machines and International Machine Tools.

Horizontal Machining Centers (HMC) :

We offer Horizontal Machining Centre with high level of standardisation. It provides an excellent price-performance ratio while maintaining a high degree of flexibility. This machine was specifically designed for robust processes: proven components, adequate speeds and a wide range of standard equipment that can be extended at any time.

Turning Centers / Lathes :

All lathes utilize a heavy-duty construction of typical “V” ways on our smaller toolroom lathes and manual engine lathes, oversized linear rails on the smaller slant bed lathes with rigid box way construction on the larger slant beds and all combination lathes.  All combination lathes incorporate manual operation, handwheel teach and full CNC operation with either conversational or standard ISO programming.  Select models are available with a Fanuc or Siemens control as well.  Feature for feature, pound for pound, nothing competes with our turning centers.

Bridge Mills :

Belted spindle configuration.  Huge travels and table surfaces place this machine right between the lightweight routers and heavyweight cast iron bridge machines.  Ideal for large fabricated parts, plates, aluminum molds and wood patterns. Travels from 100x50" to 150x80".

We market CNC Water Jet Cutting Machines manufactured by OMAX Corporation, USA. OMAX is a leading manufacturer of high-pressure water-jet cutting machines. These abrasive water jet cutting machines are CNC based and are used to machine variety material. The machine uses slurry of pressurized water at 55,000 psi and abrasive garnet. The manufacturer offers a complete line of machining tool components including centers, pumps, controllers, software and accessories. OMAX offers patented abrasive jet controller that has a built-in expert system. Moreover, the OMAX software for CNC based Water Jet Cutting Machines makes it easy to machine bis & small parts to highest of precision and in the fastest possible time that too at the lowest cost. The buyers of this machines also receive life time free software updates from OMAX.

Water Jet Cutting Machines we offer is ideal for different types of production runs including tooling, short-run production, JIT manufacturing, prototype making etc. The CNC water jet cutting machines need no tool change or complex assembling of fixtures, reducing the set-up time by at least 50%.

Following materials can be machined using CNC water jet cutting machines :

Stainless Steel	Mild Steel	Brass
Copper	Aluminum	Titanium
Glass	Ceramic	Tool Steel
Stone	Marble	Alumina
Rubber	Plastic	Composites and more…

Model       X-Y Travel (Cutting Envelope)

2626    - 29" x 26" (737 mm x 660 mm)
2626xp - 29" x 25" (737 mm x 635 mm) (Extreme Accuracy) 
2652    - 52" x 26" (1321 mm x 660 mm)
5555    - 55" x 55" (1397 mm x 1397 mm)
55100  - 100" x 55" (2540 mm x 1397 mm)
60120  - 126" x 62" (3200 mm x 1575 mm)
80160  - 168" x 80" (4267 mm x 2030 mm )
80X     - 165" x 80" (4191 mm x 2032 mm) (Expandable X Axis)

Accessories :

Tilt-A-Jet : The Tilt-A-Jet lets the OMAX Jet Machining Center achieve virtually zero taper with most materials. The Tilt-A-Jet can position the nozzle at an angle calculated by the software to exactly offset the taper from the abrasive jet.

Precision Optical Locator (POL) : The POL is designed to let you accurately place parts on the OMAX for secondary machining operations.

Drill head attachment : The OMAX Drill Attachment permits reliable piercing of laminates and composites prior to abrasive water jet cutting. The OMAX Drill accurately pierces small diameter holes in laminates and composite material.

Adjustable tilt nozzle : Manually adjusted to tilt Nozzle at a fixed angle from 0 to 45° which allows cutting a part at an angle in one direction.

Terrain Follower : Automatically and accurately cut parts from materials with irregular or warped surfaces without the need for special programming.

Mini Jet Nozzle : It is ideal for making parts with intricate shapes or where narrow cut with minimum possible taper is desired.

Solids Removal System (SRS) : Removes waste garnet from the catcher tank and deposits it into a dump hopper.

Greenerd Press & Machine Company, Inc. USA :

We are a trusted agent of Greenerd Press & Machine Company, Inc. USA, in India offering different types of hydraulic presses manufactured by them. We have marketed numerous standard and custom made hydraulic presses for Greenerd in India, Bangladesh & Sri Lanka. Greenerd's hydraulic presses are rugged, heavy-duty machines, built to stand up to the hard effects of any three-shift manufacturing. These hydraulic presses demand minimum maintenance and deliver years of trouble-free operation.

The different types of Greenerd hydraulic presses, we market are best suitable for :

• Compression Mouding of Plastic components
• Trimming of forged components
• Straightening of large shafts
• Forming of Precision Metal Parts

Tianjin Tianduan Press Co., Ltd. China :

We market hydraulic press made by TIANDUAN – China. The company has been manufacturing difernt types of Hydraulic Presses (varying capacity from 80 kN to 100000 kN (1000 Tons)

These Hydraulic Presses are of world class quality and are widely used in the field of auto industry, metal extrusion, aviation, chemical machinery, powder metallurgy, electrical appliances, die manufacturing etc. The different types of hydraulic presses offered are :

• Forging Hydraulic Press
• Squeeze Casting Hydraulic Press
• Hydraulic Chassis Member Press
• Single Action Hydraulic Stamping Press
• Double Action Hydraulic Drawing Press
• Four Column Hydraulic Press
• Hydraulic Press For Welding Plastics of Automobiles
• Four Column Upstroke Type Hydraulic Press
• Frame Type Hydraulic Press
• Explosive Compacting Hydraulic Press
• Hydraulic Crimping Press
• Hydraulic Press with C-frame for Straightening
• Metal Extrusion Hydraulic Press
• Plastic Product Hydraulic Press
• Glass Fiber Reinforced Plastic Hydraulic Press
• Ceramics Product Hydraulic Press
• Abrasive Product Hydraulic Press
• Powder Product Hydraulic Press
• Wheel Mounting Hydraulic Press
• Hydraulic Fine-blanking Press
• Die Spotting Hydraulic Press
  

CNC HAP - 3 Axis CNC Press Brakes :

• Standard 3 Axis Y1, Y2 and X
• Synchronized Cylinders with proportional valve technologies to provide maximum precision in bending angles
• Standard CYBELEC DNC 60PS Controller – Easy Usage, High storage Capacity, Full Service Suport, Robust Construction
• Optional ER70 – DELEM Controller – 2D Fraphical Bending Simulation, 10.4” TFT Display
• AC Motorized Back Gauge with Ball Screwed Shaft in X-Axis for Auto Adjustment.
• Anti Deflection System (Manual / Motorized) – Optional
  

CNC AP – 4 Axis CNC Press Brakes :

• Standard 4 Axis Y1, Y2, X and R (Optional X1 + X2, R1 + R2 and Z1 + Z2)
• Standard Back Gauge with X & R Axis Driven by AC Servo Motor Tolerance 0.01 mm
• Synchronized Cylinders with proportional valve technologies to provide maximum precision in bending angles
• Standard Graphic Controllers – CYBELEC  MODEVA 10 with PC1200 or DELEM 69W
• Optional Controllers - CYBELEC ModEva 15S 3D, ModEva 12, DELEM 69W 3D, ER-80 (3D), ER-90 (3D) 
• Standard Anti Deflection System (Manual) / Optional (Motorized)
  

 
CNC SAP - High Speed Press Brake :

• High Speed Fall Movement & Up Movement (200 mm/sec)
• Standard Graphic Controllers – CYBELEC  MODEVA 10S with PC1200 or DELEM 66W 2D Graphics or ER-80 (3D) or ER-90 (3D) 
• Optional Controllers - CYBELEC ModEva 15S 3D, ModEva 12 3D, DELEM 69W 3D
• Optional Front Support Arm with CNC Control (AP3 + AP4 Axis) 
• Standard Anti Deflection System Motorized
  
• Long X Stroke (800 mm) and Long R Stroke (250 mm)

CNC HVR – Hydraulic Variable Rake Guillotine Shear :

• CYBLEC DNC 61 G Controller
• Automatic hydraulic Blade Gap Adjustment, angle adjustment, stroke adjustment
• Optional X1, X2 Back gauge for Angular Cutting

ERMAKSAN has obtained the principle of providing customer satisfaction by product quality and durability, technology, price and after sales support.

CNC CO2 Flying Optic Laser Cutting Machine :

LASERMAK reflects nowadays latest technology and meets whole expectations by its high performance, high velocity, high accuracy, wide application range, low running and maintenance costs features to the sheet metal working machinery users' utility as a result of R&D labors.

LASERMAK which has reliable, strong, mono block construction and highly dynamism is manufactured by combining ERMAKSAN's 40 year old experience in the sector with components that their quality certified in world markets


CNC Plasma Cutting Machine :

New Plasma Cutting Machine has high and accuracy cutting quality, the advantageous of low working and investing cost, convenient for placing in a production line for automation. 

Our Plasma machines are having User Friendly Operating Panel and is easy to use for even new operator. High Defination Plasma Technology provides high quality cutting on a wide range of material type and thickness. The acceleration of the system, low vibration features and accurate moving system provides high cutting quality on the finished parts in less time.


CNC Punch Press :

Currently three models are available :

1. CPP - Combine Plasma Punch Press
2. RPP - Rotative Head Punch Press
3. FPP - Fixed Head Punch Press

Band Saw Cutting Machines :

We market band saw cutting machines made by DISPA DOKUM Turkey. These quality band saw cutting machines are available in different models, thus assuring befitting machines as per client's application need. DISPA makes semi automatic & fully automatic band saw machines in different series. They are suitable for pivot, column, vertical & circular cutting needs. Some salient features of these machines are :

• Automatic hydraulic pressing with button control
• Option to control cutting speed
• Pressure indicator for band tension
• Suitable for different material dimensions
  
• Warns out-of-order by display screen
• Cover switch for safety
• Showing the number of material cut
• Automatically stops at the number of cut (fed)
• Hydraulic double vice
• Automatically stops when band breaks down
• Hydrolic Tightening & Loosen band
• High quality electric system
  
• Works without problem
• Touch Panel for user convenience

Pipe Profile Cutting Machines :

We offer DISPA DOKUM make, superior quality automatic / semi automatic single vice and double-vice profile cutting machines. These machines are available in variety of models to suit client's specific application need. According to customers application, DISPA's pipe profile cutting machines exhibit the following features :

• Option to choose circuit according to the material due to double circuit motor
  
• Emergency stop button for emergency actions
  
• Motor protecting term for protecting motor and pump, assuring long run
  
• Cooling of saw & removal of chips from the cutting surface by cooling water engine and recycle system placed inside cabinet
  
• Pressing the material from the closest distance to the blade by regulatory moving vice jaw
  
• Moving blade protecting cover for safety
  

We are sole agents of DOOSAN Heavy Industries & Construction Co. for marketing its plastic mold steel in India & other parts of Indian sub-continent. We are supplying high quality plastic mold steel that are special alloy elements in their HP series plastic Mould steel.

Material Characteristics :

• Outstanding Machinability
• Less Residual Stress and Distortion
• Superior Cleanliness, Weldability and Photo-etching
• Better hardness distribution
• Outstanding hardness distribution and Wear Resistance

Manufacturing Characteristics :

MELTING : Superior cleanliness due to High Vacuum degassing process

FORGING : No solidification defect by using 130MN & 42MN Press

HEAT TREAT : Excellent mechanical properties by optimal heat treat

We are Indian representatives & sole agents of DOOSAN Heavy Industries & Construction Co. - an ISO 9001 certified manufacturer of casting & forging products and tool steel. We market forged tool steels, manufactured by Doosan. These steel are well accepted for their toughness in different working conditions and for hot and cold work tool in ferrous and non-ferrous metal applications.

We cater to different sectors like sectors such as electric, electromagnetic, aerodynamic, optical, telecommunication and a host of other industries, with Doosan make forged tool steel.

The Highlights :

• Clean and High Quality : Tool steel offered has superior cleanliness and high quality with a minimum of nonmetallic inclusions through special refining and vacuum-degassing processes.

• Homogeneous Structures : Tool steel we offer is hexahedrally forged by 10,000-ton or 4,200-ton press upsetting and swaging. Its macro-structures and micro-structures are fine and uniform at any cross section.

• Excellent Machine-ability

• High Strength and Toughness at the used temperatures

• High Resistance to Heat-Check and Erosion