 |
|
Catalog
With our expertise in the market, we are amongst one of the leading and trusted manufacturers of dashboard instruments and other accessories, which find a great usage in the automobile industry. Backed by state-of-the-art infrastructure and well defined quality policy, we manufacture flawless range of instruments, which undergo intense reliability tests and endurance performance test before they are sent at the client's end. The range of products we offer include :
|
|
SPEEDOMETERS
SPEEDOMETER TWO WHEELER & FOUR WHEELER
SPEEDOMETER TWO WHEELER
Type NS Design:
Ratio, W 1.0, 1.4, 1.125, 0.95, 0.625
Dial Range 0-80, 0-100, 0-120, 0-140 Km/h
Diameter Ø 48mm / 60mm / 80mm / 85mm / 100mm
Sweep Angle 130°, 180°, 240°, 252°, 270°.
Odo Meter 5 / 6 Digits
Movement Clock wise / Anti Clock wise.
Suitable 2 wheelers / 3 wheelers
Four Wheeler
Type Smith Design
Ratio, W 1.0, 1.4, 1.125, 0.95, 0.625
Dial Range 0-80, 0-100, 0-120, 0-140, 0-160 Km/h
Diameter Ø 60mm / 80mm / 85mm / 100mm / 140mm
Sweep Angle 130°, 180°, 240°, 252°, 270°.
Odo Meter 5 / 6 / 7 Digits
Movement Clock wise / Anti Clock wise.
Suitable Car, Jeeps, Truck, Tractor
|
|
HOUR-CUM-RPMMETER (MECHANICAL /ELECTRONICS)
Type Smith Design:
Ratio, W 1.0, 1.2, 1.4, 1.125
Hour Rate Engine hours as desired
Dial Range 0-1000, 0-2500, 0-5000 RPMs
Diameter Ø 60mm / 80mm / 85mm / 100mm
odo Meter 5/6 Digits
Movement Clock wise / Anti Clock wise.
Suitable Constant Machinery (Construction/Material handling equipment)
|
|
|
|
VINTAGE TRACTOR METERS
We are pioneer production unit for vintage Tractors and motorcycle gauges and meters. We have reproduced vintage, Ammeter, oil, Tractor meters, Temperature gauges Senders exactly as per the requirements of vintage Tractors, the modus operandi is that we undertake to reproduce any thing and every thing to glorify and to keep a living testament of old glory.
WE CARE FOR NOSTALGIA
Allis Chalmers
Caterpillar
Case I / H
Ford
John Deere
Massey Ferguson
Oliver
Deutze
IHC Farmall
|
|
ELECTRICAL PRESSURE (TRANSDUCERS/SWITCHES)
Pressure transduceres for electrical oil pressure gauges are avialable in 0-7Kg/ cm2 and 0-10kg/cm2. Robustly built with accuracy and fully calibrated, electrical oil pressure gauges in NS designs available in 52mm/ 60mm dia. Pressure switch in available with S.P.DT switch, Diaphragm type construction ideal for engines, generator for low lube and crank case oil pressure.
|
|
|
|
TEMPRATURE GAUGE (ELECTRICAL/MECHANICAL)
Type Vapour Pressure, Bourdon (Imported) Capillary Type
Range 40°-120° c / 60°-210° c.
Sweep Concentric / Eccentric
Max Length 10,000 m.m.
Suitable for Car, Trucks, Tractors, Stationery Engines.
Special Features:
Built - in red glow bulb for over heat
Snap - on contact system
|
|
OIL/AIR PRESSURE GAUGE
Type Mechanical Bourdon Tube Type (Imported)
Range 0-3 kg / cm² - 0-5 kg / cm² - 0-16 kg / cm²
Sweep Angle Eccentric / Concentric.
Suitable Car, Trucks, Tractor, Stationery Engines Compressors.
Inlet Connection Both male female end connections can be provided. M12x1.5, M10x1.0, M10x.1.25, 1/8" BSP, 1/8" NPTF, 3/8"X24 UNF-2B (Internal threading) or as per requirement.
|
|
|
|
AMMETER/VOLTMETER
Type Centre Zero, Moving Magnet Type
Dial 20-0-20, 30-0-30, 50-0-50, 80-0-80 Amp, Aluminium. Back lit. LED Type.
Sweep Angle 66°, 76°, 84°, 90°.
Voltage 12V, 24V
Polarity (+)ve (-)ve Grounded system
Suitable Car, Trucks, Tractors, Stationery Engines.
|
|
FUEL GAUGES/FUEL SENDERS
Type NS Type, Moving Magnet
Range Empty 'E' to Full 'F'
Sweep Angle 76°, 80°, & 55°
Voltage 12v / 24v
Polarity (+)ve (-)ve Grounded system
Suitable for Car, Jeeps, Trucks, Tractors
|
|
|
|
ELECTRICAL TEMPERATURE (SWITCHES/SENDER UNITS)
Type Sender Unit Brass Forged Machined, Ceramic Pallet Specially designed. Electrical Temp Gauge based on NS Moving magnet design.
Voltage 12v / 24v
Range 40° - 120° c
Suitable Car, Truck, Tractors,
Electrical temprature switch, operating on Bi metallice direct snap on type.
Changeover in NC/NO type micro switch, takes place, ideal operating condition, made solidly of brass forgings with specified connection operating temperature 90 to 110'c with differential of 8 to 10'c accuracy +-2'c
|
|
INDUSTRIAL PRESSURE/TEMPERATURE GAUGES
We are a trusted manufacturer, importer, exporter & stockiest of various types of measuring instruments. As we offer certified instruments for ISO, we are an approved supplier to several government agencies & private companies. Our extensive range of instruments offers accurate measurements of temperature, pressure, humidity, flow etc. We cater to various industrial & scientific laboratory, research institutes, manufacturing units etc. Our focus on quality, accuracy and cost effectiveness has been instrumental in earning accolades from all our clients. Our team, infrastructure and personal attention to the exact needs of the client has set us far above from our competitors products:
Mercury Filled Temperature Gauges
Utility Pressure Gauges
Resistance Temperature Detectors
|
|
|
|
HELLA LIGHTS
HELLA is a reputed manufacturer and exporter of distinctive automotive lighting, head lamps, tail lamps, blinker lamps, halogen lamps, work lamps, off-road lamps, side marker lamps, license lamps. These Lamps are made in India under original German leadership and exact Quality standards. More than 40000 garages across Europe. Middle East and South Asian Subcontinents rely on Hella when it comes to after market replacement of lighting products.
Hella supplies a wide range of work lamps with computer calculated free-form reflectors for powerfull illumination of different light patterns.
Using Halogen bulbs as well as innovative HID-Xenon technology.
Version for various mounting possibilities such as surface or flush mounting.
In rectangular, round or in trendy oval shapes.
Detailed Catalogues and Specifications can be provided..
|
|
HYDAULICS PUMPS/PARTS/ACCESSORIES FOR TRACTOR
Exporters of highly engineered products for application in the automotive sector, agricultural equipment industry & construction equipment industry. Exporters of wide range of hydraulic gear pumps, motors & other hydraulic elements confirming to SAE-BIS and DIN Standards. We Export pumps to many countries and are having good number of customer's who buy regularly from us. We are able to meet the varied customers needs with range of over 200 different types of hydraulic pumps with displacements of 0.8cm3/rev. to 153 cm3/rev. pumps are produced in Aluminum. The applications include agriculture tractors, construction equipments, materials handling equipments, earth moving equipments, mining, drilling equipments & road paving.
Features:
All Pumps are tested in our test rig with online records
Endurance testing carried in-house periodically
Assembled & testing in dust free assembly room
Available in standard mountings & connections
Technology development studies in our company are proceeding intensively in order to reduce costs, increase product range, quality & reliability.
Machining, assembling & testing are carried in our plants.
|
|
|
|
TEMPRATURE GAUGE (ELECTRICAL/MECHANICAL)
|
|
|
|
|
|
|
