Totally enclosed metallurgical specimen sample cutting machines suited for wet cutting of odd as well as conventional shaped samples and sizes. These models come with a variety of table bed choices i.e. 'T' slotted with a screw feed in 'Y' axis or with both 'X' & 'Y' axis adjustable movement. A job holding vice is fitted on top of the compound table for clamping the specimen. These models come with an external operating handle. A re-circulating coolant system is also provided and pump sizes vary according to the various models. These machines are equipped with rexine splash guards in addition to the side and rear paneling. Machines that have a dual axis movement come with an option of an extension 'X' axis handle outside the machine. Internal lighting is provided in all enclosed models as well as toughened glass view windows on the front sliding doors.

Sr.No.	Model	Table Axis	Capacity	Motor  HP
1	LSW - 2	Single 'Y' Only	Upto 25mmØ	2
2	LSW - 3	Single 'Y' Only	Upto 35mmØ	2
3	LSW - 5	Single 'Y' Only	Upto 50mmØ	5
4	LSW -5/c5 /	Single 'X' & 'Y'	Upto 50mmØ	5
5	LSW - 10/c	Single 'X' & 'Y'	Upto 75mmØ	10
6	LSW -15/c	Single 'X' & 'Y'	Upto 100mmØ	15

Our masonary brick refractory cutting machines are used to cut refractory bricks, blocks, tiles, marble, stones, concrete, glass and many more. These special machines are provided for large refractories, cement pipes, prestressed concretes, M.S. plates , etc. We have designed it to provide a smooth cutting process. This machine has a foot operated cutting head. Also its cutting head height is adjustable vertically in 8 levels with a spring-loaded knob located in the front of the machine for operator convenience. An Aluminum Roll-O-Matic table equipped with a self-gripping rubber surface holds the job in place. The table is moved on rails with frictionless bearings for cutting of non-metal materials like refractory bricks, glass, ceramics, tiles, alumina, mag - spinel bricks as well as tubes. The diamond saw for your requirement is 18" (450mm) in diameter (quoted separately below). The machine is equipped with an effective re-circulating coolant system. The machine has rear splash guards to prevent coolant spillage. Its starters for the main motor and the coolant pump motor are placed on the front side of the machine for operator's convenience.

Following are the optional equipment that can be added:

• Angular cuts of up to 45° are achievable with our angular cutting guide
• Beveled cuts are made easy with our tilting attachment for bricks
• Extension table attached with the main roll-o-matic table can be added for extra long jobs. This machine is equipped with safety guards for the cutting saw as well as for the V- belts and pulleys.

We also offer our clients the ring cutting machines for the ring cutting purpose which are been used to cut tyre rings made of aluminium. These machines are designed as per the tyre rings and can be customized as per the clients need.

Our special purpose Block Riser Cutting Machines used for diecast cylinder block cutting machine. This machine is very user- friendly and away from complexities. We ensure of their efficiency in working and functionality which matches the highest quality standard.

We are prominent manufacturer of special purpose machines which are designed to cut engine head risers of aluminum castings. It works with a capacity from 15 HP to 40 Hp and has a saw diameter from 16 inches to 39 inches.

Our Granite Slab Sawing Machines are used in cutting of marble, granite, stone, steel and non ferrous plates. It has a stroke of -1 M onwards making it a suitable machine. This machine is manufactured in the following grades :

• OHTM / 5 - OHTM / 20 Manual
• OHTA/5-OHTA/30 Semi auto

MODEL	THK	MOTOR	SAW BLADE DIA
OHTM-5	15	5	300mm(12”)
OHTM-7.5	25	7.5	250mm(14”)
OHTM-10	40	10	400mm(16”)
OHTM-20	65	20	500mm(20”)

   Semi auto OHTA/5 - OHTM/30
    In Semi-Auto models the clamping is manual and the feed is through a geared head which moves the cutting head to and fro to complete the cutting cycle.

HYDRAULIC COLD SAW(PLC/NC CONTROL) Automatic/Semi Automatic /Complete cutting system
NON FERROUS CAPACITY FROM 150mm TO 300mm dia
SONICUT Machine Parameters for Billet sawing machines.

MODEL	BILLET	MOTOR HP	SAW BLADE DIA
SAHC-25	150 MM	25	450MM(18")
SAHC-30	200 MM	30	500MM(20")
SAHC-40	250 MM	40	715MM(28")
SAHC-50	300 MM	50	915MM(36")

  A complete system includes :

• Infeed gravity loader for storing billets from where the billets can be transfered one at a time.
• Infeed roller conveyer through which the billet is conveyed for cutting.
• Length stopper for sizing the material precisely.
• Outfeed roller conveyer for discharging cut billets away.
• Storage table to store cut billets and if required a multifunctional table with strapping arrangement.

FERROUS CAPACITY FROM 100mm TO 250mm dia

MODEL	BILLET	MOTOR HP	ABRASIVE DISC
SOA-30	100mm	30	500mm(20")
SOA-40	150mm	40	600mm(24")
SOA-50	200mm	50	715mm(28")
SOA-75	250mm	75	915mm(36")

     For Ferrous cutting a similar system can be offerd alongwith the cutting machine. These models have an oscillating feature for maximum utility of the abrasive disc.

NOTE: For both the above mentioned models we offer a complete Hydraulic or a Pneumatic system of operation.

We are manufacturing concrete sawing machine and asphalt sawing machine used for taking out cylindrical cores from rocks / blocks etc. It is a portable model and has the ability to take cores in any position from horizontal to vertical position. Our machine has the capacity of 100 mm0 x 150 mm long with extension rod upto 400 mm long. The machine is extensively used for cutting expansion joints in concrete air strips asphalt, grooves for cables / pipes, and cutting on mine sites. Following are the technical aspects of our product:

• Diesel Engine Drive: upto 60 HP
• Electric Drive upto 40 HR
• Wheel - 900 mm

The above models have been developed to produce cleaner cuts with a higher economy on abrasive disc. This is due to the cutting head oscillating at a particular frequency thereby reducing the arc of contact on the material hence reducing heat generation resulting in a longer disc life. Further due to the oscillating cutting motion, larger sections can be cut with a smaller capacity motor. All the above models are complete with a recirculating coolant system built-in. Additionally the above models have optional material handling equipment that can be ordered with the machine and will be quoted separately upon request.

Sr.No.	Model	Type	Motor HP( Kw )	Capacity to Cut Solid Rounds, Squares, Angles, Channels Up To
1	SOM - 10	Manual	10 (7.5)	R = 50, S = 50, A = 65, C = 75 mm
2	SOM - 15	Manual	15 (11)	R = 63, S = 63, A = 75, C =100mm
3	SOM - 20	Manual	20 (15)	R = 75, S = 75, A = 90, C =125mm
4	SOM - 25	Manual	25 (18.5)	R = 80, S = 80, A = 100,C=150mm
5	SOM - 30	Manual	30 (22)	R = 90, S = 90, A = 150,C=175mm
6	SOA - 10	Semi - Auto	10 (7.5)	R = 50, S = 50, A = 65, C = 75 mm
7	SOA -15	Semi - Auto	15 (11)	R = 63, S = 63, A = 75, C =100mm
8	SOA - 20	Semi - Auto	20 (15)	R = 75, S = 75, A = 90, C =125mm
9	SOA - 25	Semi - Auto	25 (18.5)	R = 80, S = 80, A = 100,C=150mm
10	SOA - 30	Semi - Auto	30 (22)	R = 100, S = 100, A = 150,C=175mm
11	SOA - 40	Semi - Auto	40 (30)	R = 150,S =150,A=200,C= 225mm

Our concern is manufacturing core drilling machines are used to take out cylindrical cores from Rocks/Blocks etc. It is a portable model and can take cores in any position from horizontal to vertical position. Its capacity lies in 100 mm Dia. to 300 mm Dia. and 150 mm deep to 250 mm deep with extension rod upto 400 mm long.

We are manufacturing a vast range of laboratory specimen polishing machines. Also, we are also providing variable speed machines along with this machine. Our specimen grinding & polishing machines are extensively used with paper or cloth. These have flexible swing taps with black formica top.Our spectrographic & laboratory specimen polishing machines are qualitative in nature and deliver highly rated performance. Also, we provide variable speed machines with our machine. Our specimen grinding & polishing machines are used with paper or cloth. Adding to our product, magnetic arm for holding are also samples available.

Laboratory Speciman Polishing Machines available in single disc and double disc.

Double disc models:

MODEL	No.Of Disc's	Disc DIA	No. of MOTORS	Type
200-D2	2	200 MM	2 Nos.	Wet
250-D2	2	250 MM	2 Nos.	Wet
350-D2	2	350 MM	2 Nos.	Dry w/Suction

• VARIABLE SPEED MACHINES ALSO AVAILABLE
• SPECIMEN GRINDING & POLISHING MACHINES FOR
• USE WITH PAPER OR CLOTH.
• FLEXIBLE SWING TAPS WITH BLACK FORMICA TOP.

Single disc models

MODEL	No.Of Disc's	Disc DIA	No. of MOTORS	Type
2OO-D1	1	2OO MM	1 Nos.	Wet
25O-D1	1	25O MM	1 Nos.	Wet
35O-D1	1	35O MM	1 Nos.	Dry w/Suction

• VARIABLE SPEED MACHINES ALSO AVAILABLE
• SPECIMEN GRINDING & POLISHING MACHINES FOR
• USE WITH PAPER OR CLOTH.
• MAGNETIC ARM FOR HOLDING SAMPLES AVAILABLE.