We offer EFG machines that are widely appreciated for their simple connectivity with laptop, optically isolated, suitable in ICU's in-built word processor for reporting and many other attributes. The machine is developed using various grades of material and possess following features, specifications as well:

• Complete EEG transfer on cd & playback without additional software
• Operating system windows 98/me/xp/2000
• Auto spike detection
• Comparison of three montages simultaneously
• Brain mapping
• Upgradable to video EEG
• Online, Offline reformatting of Montages, HLF,LLF, Sensitivity & number of Channels
• Splits Screen facility to compare three montages simultaneously
• Montage diagram & Photic Marks on Printout
• Automatic Hyperventilation Timings
• Automatic AC Impedance check
• Brain Map for frequency, Spectral and voltage with Left / Right view
• Compressed Spectral Array (CSA)
• Programmable Colors of each Channels
• Users Programmable Photic Sequences & Events
• Ultra fast automatic paging facility for efficient analysis
• Facility to zoom required portion of data
• Facility to write comments during review
• Facility to send data by e-mail
• Search bar facility to access to any part of data
• User defined protocol for acquisition
• Computerized calculation of Amplitude & Time
• Selected EEG data extraction
• Simultaneous acquisition and Analysis facility
• Facility to mark page in review and print

 
 
Accessories Available

DiscElectrodes	50 Nos
EEGPaste	2 Jars
Groundwire	1 No
USB Cable	1 No
PhoticFlash	1 No
PaperRim(A4 Size)	1 No
ElectrodeBoard	1 No
InstallationCD	1 No
ElectrodeBoard	1 No
CarryBag	1 No

Specifications:

Max. no. of display channels € NC - 2400 € NC - 3200	24 Channels 32 Channels
A/D Conversion	16 bit
Sampling Rate	Sampling Rate
Sensitivity	(1 to 1000uv)
Low Pass Filter	0.1,0.3,1 & 5 Hz
High Pass Filter	15,35,70,100 Hz
Notch Filter	50/60 Hz on/off
Sweep Speed	7.5,15,30 & 60 mm/sec
Input Impedance	> 10 M ohm

We offer a diverse array of EMG machines which are manufactured as per the stated standards. The entire range is designed and developed as per the existing medical standards. Thus we can fulfill the exact requirement of our clients. Cited below are the features of our EMG machines:
 

• Real time data storage & review facilities
• Spontaneous
• Single fibre & jitter EMG
• Interference pattern
• AMUAP
• Turn/amplitude analysis
• Power spectrum

 
NERVE CONDUCTION STUDIES
 

• Motor nerve conduction studies
• Sensory nerve conduction studies
• F-WAVE
• H-REFLEX
• Blink reflex
• Repetitive stimulation/myasthenia
• Refractory period

 
EP STUDIES
 

• AUDITORY
• VISUAL
• SSEP

 
Technical specifications:
 

Channel	:	1,2 0r 4
Sensitivity	:	,0.2,0.5,1,2,,10,20,50,100,500 µV/div; 1,2,3,5 mv/div
High Cut	:	Selectable at 100,200,500 Hz; 1,2,3,5,10 KHz
Low Cut	:	Selectable at 2,20,30,100,200,500 Hz, 1KHz
CMRR	:	> 100 db
Input Impedance	:	> 100 M ohm (common mode)
Noise	:	less than 2µV peak to peak (10 Hz to 10 KHz)

 
Other technical specifications are as follows:
 

• A/D CONVERTER: 14 bit analog digital conversion
• AVERAGER: Number of averages per channel 1 to 400,000 selectable
• SWEEP SPEED: Selectable 1 to 500 ms/div

 
Electrical Stimulator
 
We offer electrical stimulator with stimulus intensity dial and stimulus trigger. It is electrically isolated and has hand held constant current.
 

Repetition Rates	0.5 Hz to 10 pps regular or random repetition rates depending upon stimulus type, Sweep speed & protocol
Pulse Width	0.05, 0.1, 0.2, 0.3, 0.5, 0.8, 1 ms
Stimulus intensity	0-350 V (0-120 ma) adjustable
Triggering System	Two Independent foot switches to allow hand free triggering, Single Shot Triggering & Multiple Shot Triggering

 
 
Auditory Stimulator
 

• Source:  Head Phone
• Stimulation Mode:  Click Sound
• Pulse Width: 0.05, 0.1, 0.2, 0.5, 0.8, 1 ms
• Tone Frequency: 0.5 to 10 KHz
• Presentation:  Left, Right, Biaural
• Intensity: 0 to 130 db
• Stimulus Phase: Condensation, Rare faction or Alternating
• White Noise: Contra lateral masking from 0 to 80 db

 
Visual Stimulator
 

We offer polygraph for various medical purposes according to the existing medical standards. Our polygraphs are offered with transducers which is a device that converts one form of physical energy to electrical energy or vice versa. To record parameters which are not available in electrical form e.g. pulse, respiration, temperature, phono cardiogramme and others appropriate transducer is to be used.
 
Following are the transducers manufactured by us:
 

• PRESSURE  

• VOLUME     

• MUSCLE  

• ACTIVITY/FORCE  

• RESPIRATION   BELT 

• ISOTONIC 

•  FINE   MOVEMENT 

• PULSE

• RESPIRATION(THERMISTOR)

• TEMPERATURE INTERNAL 

• TEMPERATURE SURFACE

• PHYSIOGRAPH STIMULATOR (Optional)

• A Turn Controlled Pulse Generator

• MODE : SINGLE, EXTERNAL & REPETATIVE

• PULSEWIDTH : 0.5and 1.5 ms Switch selectable

• REPETATIVE FREQUENCY : 0.5,1,2,3,5,7,10,15,20,50 & 100Hz

• TWIN PULSES : Provided Delay adjustable from 5 to 250ms

• OUTPUT VOLTAGE : 0 to 30Volts{Two positions 0-3 & 0-30 Volts vernier controlled)

ACCESSORIES
 
The following accessories are supplied free of charge with each console:
 

Extra Pen	01
Extra Cradle	01
Fuses	10
Earthing Cord	01
Chart Paper	10 Pkts. each of 250 sheets
Ink	½ Ltr.
Instruction Manual	01

 

We offer student physiograph which is used to record bio-electrical potentials such as EEG, Pulse, Respiration, ECG, ENG, EMG, blood pressure and others. It is developed from light metal for lightness and compactness. It has outstanding performance, owing to the adoption of integrated circuits. Some of its special features include:

• Single & Three (2+1) Channel
  
• Easy to Operate-even by a beginner
  
• Designed on the concept of couples for specific recordings
  
• High Sensitive
  
• Rugged
  
• Versatile
  
• Accurate
  
• Reliable
  
• Time & Event Channel (Optional)
  

It has trouble free, precise and easy operation. Compact design enables to carry it around. "MEDICAID" STUDENT PHYSIOGRAPH comprises of:

• Main Console
  
• Couplers
  
• Transducers
  
• Accessories like electrodes.
  

MAIN CONSOLE

• The main console houses chart drive, ink pen recording system, main amplifier and housing for plug in couplers.
  
• Electronically controlled 9 chart speeds provided are .5, 1, 2, 5, 10, 20, 25, 30 & 50 mm/sec. Any other speeds are provided against specific requirements
• Speed selection is easy and instantaneous.
• Channel width is 70 mm.
• Ink writing Pen is 120 mm in length to minimize arc distortion.

Its main amplifier is fitted in the console having switch selectable sensitivity range from 50 microvolts per cm to 100 millivolts per cm in 11 steps as 50, 100, 200, 500 µv/cm and 1, 2, 5, 10, 20, 50 and 100 mv/cm.


COUPLERS

We offer a range of couplers that are used for recording different parameters. They are modular interchangeable in the same console or from console to console and one can easily plug them in or out in few seconds. The standard range of couplers is as follows:

 

BIOPOTENTIAL COUPLER:	recording all AC phenomena like ECG, EEG, EMG, ENG etc. It is supplied with 3 pin junction box, EEG-EMG electrodes and paste etc
EKG COUPLER	For recording clinical ECG, It is supplied with 5 pin junction box. Limb & Chest Electrodes and Jelly
STRAINGAGE COUPLER	For recording from all Medicaid straingage transducers and used to record muscle activity force, effect of drug on heart activity. Blood pressure from cannulated animals, volume changes etc.
PULSE-RESPIRATION COUPLER	For recording pulse or respiratory activity using Medicaid's pulse, Respiration Belt or Respiration transducer
TEMPERATURE COUPLER	For recording internal or surface temperature through Medicaids temperature Transducer
ISOTONIC COUPLER	Using it along with Medicaid's Isotonic Fine Movement transducer one can perform experiment on Isolated Uterus and Isolated Intestine

We offer a wide array of medical equipment which is reckoned for their reliability and accuracy. Our range of ECT machine is approved and accepted by the medical fraternity. These are trusted as they give accurate results during operation and other activities.
 
Following are some of the details of our ECT machines:

• Parameters Display on LCD
  
• Auto Stimulus Voltage
  
• Auto Impedance check
  
• Output display in joules as well as in mill coulombs
  
• In built rechargeable battery with charger
  
• Over 2500 satisfied customers Standard Accessories
  

Technical Specifications of our ECT machines are:
 

Model	BPE - 791 BPI - 791
Pulse Configuration	Bidirectional square wave
Output Current	0.9 Ampere (constant)
Frequency Range	20 to 90 Hz in 6 steps
Pulse Width	0.1              to 2 cms. In 6 steps
Mode	Timer & Manual
Stimulus Duration in Timer Mode	to 5.9 sec. in step of 0.1 sec. Time is displayed on LCD and down counting starts on pressing the TREAT switch
Minimum Power	2.7 joules for 220 ohm patient impedance
Maximum Power	160 joules for 220 ohm patient impedance
Energy Display	Energy in joules gets calculated automatically by built in microcomputer and displayed on LCD panel meter in both Timer and Manual mode
Charge	12 to 1400 mill coulombs in both manual and timer mode
Impedance Check	Impedance of patient is displayed as Pass/Fail on LCD
Size	370 X 250 X 100(H)

We offer a wide range of biofeedback equipments which are manufactured in accordance to the medical standards. These are offered in various models which makes it more relevant to the medical fraternity. To make it more clients specific we also offer customization of our range.
 
Cited below are some of the features of our biofeedback equipments and their features: 
 
GSR BIOFEEDBACK "BIOTRAINER" (GBF-2000)
 
During uneasiness, anxiety and tension sympathetic nerve system is tensed; perspiration increases and GSR (galvanic skin resistance) drops GBF-2000 which helps trainee perform self-control over emotional responses leading to relaxation.
 
Perspiration decreases and GSR rises, thus our GSR BIOFEEDBACK "BIOTRAINER" (GBF-2000) is developed with the following features: 
 

DISPLAY	17 Light steps on screen (Green 11.yellow 1. Red 5) GSR balanced (starting) Value and also the changes in the GSR value in K - ohm is displayed on LCD panel meter
SOUND	Melodic variation in 17 steps
SENSITIVIY	3 steps 2%, 5% and 10%
POWER	220 VAC, 50 Hz
DIMENSIONS	420 x 210 x 125 (H) mm
OUTPUT	Provided for Recorder, Oscilloscope Computer and others
ACCESSORIES	Set of silver electrodes Headphones

 
 
TEMPERATURE BIOFEEDBACK "BIOTRAINER" (TBF-6000)
 
Increasing stress causes peripheral blood vessels to constrict which lessens blood flow to the hands and feet thus lowering extremity temperature. For those who experience the discomfort of cold hand and feet or headache when under stress caused by constricted blood vessels in the head Temperature biofeedback is very useful.
 
DISPLAY LCD panel meter for temperature in °C video feedback - 17 light Steps (green 11.0 yellow 1 Red 5), has following features:
 

SOUND	Melodic variation in 17 steps
SENSITIVITY	3 steps 0.05, 0.02, 0.5 °C
TRANSDUCER	Solid State Sensor
POWER	20 VAC, 50 Hz
DIMENSIONS	420X210X125 (H) mm
OUTPUT	Provided for Recorder, Oscilloscope Computer and others
ACCESSORIES	Temperature sensor prob/Headphone

 
 
EMG BIOFEEDBACK "BIOTRAINER" (MBF-4000)
 
Tension headaches are caused because of muscle contractions of the scalp, face and neck. For preventing and curing the tension headache one has to learn to relax these muscles. Different techniques are used to teach muscle relaxation with the most successful results having been obtained by using EMG BIOFEEDBACK.
Three feedback modes are

We offer a wide range of highly specialized and performance oriented PFT machines. These are manufactured in adherence to the existing medical standards. along with the standardized range we can also customize them according to the requirements of our clients.

• Digital spirometer with automatic interpretation

• Easily sterilizable pneumotach

• Simple and trouble free technology

• Accurate and precise

• Windows® based user friendly software

• Real time display of flow-volume loops

• Incentive screen for better efforts

• User's configurable 2 nos. Prediction table

• Pediatric encouragement software

• Automatic btps correction

• Multiple report formats with color printout

• Unlimited test result storage and retrieval

• Report can be sent via e-mail

Following are the technical specification:
 

Flow Measurement	Bi-directional digital turbine
Volume Measurement	Flow Integration
Flow Range	0.03-20 l/s
Volume Range	0-12 liters (BTPS)
Flow Accuracy	±2%
Volume Accuracy	±2%
Graph Scale	Meets ATs standards for graph
Power Source	5V from computer through USB port.
Interface	USB
Patients Incentive Screen	Provided
Printer	PC Compatible
Storage	On hard diskdrive
Interpretation	Automatic
Weight	100g.
Temperature	0-50°c
Dimension	165x50x25mm

 

Prediction Table	Indian, ECCS, Knudson 83, Zapletal, Barcelona, ATS94, LAM, ITS White, ITS Black, LLN, user defined predicted calculations
Test Performed	Forced Vital Capacity (FVC), Slow Vital Capacity (SVC), Maximum Voluntary Ventilation (MVV), Respiratory Pattern, Broncho-challenge tests.
Measured Parameters	• FVC • FEV.5 -FEV 1 • FEV 3 - FEV1/FVC • FEV3/FVC - FEF 25-75 • PEF • FEF-25 • FEF-50 • FEF75 * SVC • ERV- IRV • TV • RR • PEFT • FMFT • FIV-1 • FIV1/FIVC • PIF • MVV

 

The BERAGRAPH (BERA-3000) are offered with high performance amplifiers specifically designed to obtain high quality evoked potentials signals. With 14 bit averages, the BERAGRAPH can measure an objective auditory threshold a degree of accuracy greater than 5 db and so distinguish end cochlear deafness from retro cochlear deafness. The auditory stimulator in turn gives burst, logon and click stimulation presented either in condensation, rarefraction or alternating from 0 db to 120 db. The masking intensity can be controlled automatically with the stimulating intensity while maintaining the same programmed difference. With the BERAGRAPH we can get brain stem evoked responses anywhere such as consulting rooms, intensive care units, recovery rooms and others.
 
BRAIN AUDITORY EVOKED RESPONSE (BERA-3000) is one of the models of our Bera. These are offered with the following features:

• Windows 98/ME/XP complaint

• Simple user's friendly software

• Superimposition of curves

• Split screen for comparison of left/right curves

• Smoothing filter on Stored data

• Reformatting of parameters during and after test

• BERA, MLR, LLR & P300 Tests

• Upto 16 waves can be recorded

• Auto markings on curves

Some of the specifications of our range are:

CHANNELS	1, 2 & 4
SWEEP SPEEDS	1 to 1000 ms/div in 19 steps
HIGH CUT	Selectable at 100, 200, 500Hz, 1,2,3,5,10 Khz
LOW CUT	Selectable at 0.2,2,20,30,100,200,500Hz
CMRR	>100db
NOISE	less than 2µv peak to peak (1 Hz to 10 Khz)
INPUT IMPEDANCE	> 100 M ohm (Common mode)
A/D CONVERTER	14 bit analog digital conversion
AVERAGER	Number of averages per channel 1 to 9999 selectable.

AUDITORY STIMULATOR

SOURCE	Headphone
STIMULATION MODE	Click Rarefraction, condensation & alternative Tone
PULSE WIDTH	.05,0.1,0.2,0.5,0.8,1 ms
PRESENTATION	Left, right or both ears
INTENSITY	0-120 db
FREQUENCY	250 Hz to 8000 Hz
WHITE NOISE	Contralateral masking from 0 db to 80 db nhl
RATE	User definable

Polysomnography is a complete recording of the biophysiological changes that occur during sleep. Usually, the polysomnogram or PSG is usually performed at night, during sleep but some labs can accommodate shift weakness and do the test at other times. The PSG monitors body functions including brain (EEG), eye movements (EOG), muscle activity or skeletal muscle activation (EMG), heart Rhythm (ECG) and breathing function and respirations effort sleep.
 
Polysomnography (PSG) Video Sleep Study System is developed by highly qualified technocrats’ possessing experience of 30 years in Biomedical Instruments which assures reliability and quality service to the Neurophysiological community.High quality medical EEG/PSG data acquisition amplifier systems, isolated grade using optical isolation components for highest patient safety are manufactured by us. Simultaneous recordings of high quality PSG traces and high resolution digital video offer enhanced diagnostics capabilities.

We are engaged in fabricating a comprehensive range of Microprocessor controlled single channel ECG Machine. we adhere to the set medical standards while manufacturing our ECG machines. These are widely used for performing various medical tests on the patients.


Salient features of this machine:

• Parameters Display on backlit LCD

• Compact lightweight portable easy to us

• Maintenance free digital thermal array printer hence free from friction, non-linearity, damping & stylus heating problems

• Ample clear ECG tracings

• Feathers touch key operation

• In built rechargeable battery with charger

• Automatic & Manual modes

• Very affordable

Following are some of the technical specifications:

Leads	Standard 12 leads
CMRR	Greater than 120 db
Input Impedance	50M ohm
Frequency Response	.05 to 125 Hz (-db)
Time constant	more than 3.2 seconds
A/D Conversion :	10 bit
Noise	+1/4 LSB (less than 1 micro volt peak to peak)
Leakage Current	<10 micro amps
Filters	Digital AC 50 Hz
Recording format	Auto & Manual
Writing Device	Electronic thermal array Printer
Recording Length	2 sec./lead (factory set-Auto format)
Recording Paper	Thermal 50 MM. 30 mtrs.
Sensitivity	5,10 & 20 mm/mv.
Paper Speed	25 & 50 mm/sec.
Recording Tracks	Single channel Automatic trace centering
Print Out	ECG Trace, Gain, Paper Speed, Lead Marking and calibration pulse.
Power Supply	230 V AC/50 Hz
Battery life	>50 ECG’s
Weight	1.5 kg. (with battery)
Dimensions	260 L X 150 W X 75 H (mm)

We offer TMT / Defibrillator with varied specific features which are ststed as under:

• Optically isolated amplifier.

• State-of-the-art Windows based Stress Test Software.

• Wide range of comprehensive reports.

• Medicaid's in-house fabricated medical grade tread mill driven by 2.5 HP Japanese motor.

• Online/Offline printing.

• Graphical representation of ST-HR trends.

• Performs both resting 12 lead ECGs & stress tests on one system

• Antistatic treadmill belt.

• Optional blue truth (wireless) facility.

We offer a wide range of highly specialized and performance oriented Multi Parameter Monitors. These are manufactured in adherence to the existing medical standards. With our expertise we can also customize them according to the requirements of our clients.
 
Cited below are some of the technical specifications:
 

Safety	Meets the requirements of IEC60601
Dimension	330mm (W) x 280mm {H)x 150mm (D)
Weight	6.5kg

 
Operation Environment of our Multi Parameter Monitors is:
 

Power	AC110-220V, 50/60 Hz
Temperature	5-40°C
Humidity	<80%

 
Some of the application areas are as follows:
 

• Adult

• Pediatric

• Neonatal

 
Performance Specifications:
 

Display:	12.1" color TFT Resolution:800 x 600
Trace:	9 waveforms
Sweep speed:	6.25,12.5,25, 50 mm/sec
Indicator:	Alarm indicator, Power indicator, QRS beep & alarm sound
Interface:	Net Port
Battery:	Rechargeable
Trend time:	1-72 hours
Alarm:	3-level audible and visual alarm
Networking:	Can be connected to central monitoring system
Recorder:	Built-in, thermal array

ECG
5-lead selectable
Input:	5-lead: RA; LA; RL; LL; C
Lead selection:	I; II; III; avR; avL; avF; V
ECG selection:	7 channels
Gain waveform:	x0.5;x1; x2; x4
Sweep speed:	12.5mm/s, 25mm/s, 50mm/s
Heart Rate range:	Adult: 15-300bpm; Pediatric/Neonatal: 15-350bpm
Accuracy:	±2bpm or ±2%, whichever is greater
Resolution: