Medical & Control Instruments House Private Limited

• Universal Inputs - mA, Volt, pulse .
• Programmable Batching control .
• On-Off / Continuous control outputs.
• Dual 6 digit programmable Totaliser.
• Battery backed totaliser counters.
• Fully front panel programmable.
• Tamper proof Software Calibration.
• Wide supply tolerance - 90 to 270V.

Simulates / measures 9 T/Cs & 3 RTD s.
Built-in cold Junction Compensation.
0.05% Accuracy.
Potentiometer free Digital setting.
Bold, Back lit LCD Display.
User configurable ranges/output steps.
Stepping up/down feature.
Powered by AA (1.5V) batteries.
Carrying pouch for Hands-off field work.

Simulate or Measure mA & V signals.
0.035% Accuracy.
Potentiometer free Digital setting.
Bold, Back lit LCD Display.
User configurable ranges/output steps.
Stepping up/down feature.
Powered by AA (1.5V) batteries.
Hip pouch for Hands-off field work.

Variety of outputs and inputs
Easy configuration and interactive display messages
Direct Digit Access
Settings and Readings in percentage
Single Key Functions
Memory Stepping
Logging off field data for calibration report
Battery protect functions.

Variety of outputs and inputs Easy configuration and Einteractive display messages
Direct Digit Access
Settings and Readings in percentage
Single Key Functions
Memory Stepping
Logging off field data for calibration report
Battery protect functions

The Isolators and signal converters range is very wide and includes universal input Signal Converters, Universal input Signal multipliers, and Universal input Signal Isolators. This also includes Digital and analog Signal Multipliers, Signal Converters and Signal Isolators. Our special range of Signal Conditioners has programmable multi point lineariser.

Powered from 4-20mA signal loop.
4 digit LCD display.
Sq.root/Linear indication of Input.
Fully keyboard programmable.
Linear /Sq.root Selection.
Alarm type,Value are Programmable.
Rangeable in Engineering units.
Alarm indication on display.
Flush panel / Field Mounting.

Wide choice of Input types.
Fully programmable through keypad.
5 Digit LED Display.
Linearisation of T/C & RTD.
Realistic cold junction compensation.
Sq.root / Linear indication of mA / V.
Rangeable in Engineering units.
Open sensor Indication.
Two potential free contacts.
Optional Retransmission output.

• Accepts mA/V inputs
• Built in Transmitter powering
• Square root / linear selection
• Powerful software features
• Fully configurable through keypad
• 5 digit rate of flow display
• 8 digit totaliser with battery back-up
• Optional retransmission output
• Optional alarm / Pulse output contacts
• 110 V / 220 V AC mains powered.

Accepts mA/V inputs
Built in Transmitter powering
Square root / linear selection
Powerful software features
Fully configurable through keypad
5 digit rate of flow display
6 digit totaliser with battery back-up
Optional retransmission output
Optional alarm / Pulse output contacts
110 V / 220 V AC mains powered

18-bit Sigma Delta Signal Conversion
10 msec- output response time
Wide choice of Input Types.
Linearisation of T/C and RTD inputs.
Supports 4 wire RTD
31-point Characteriser Module.
Realistic Cold Junction Compensation.
Three Port Isolation.
Plug-in Terminal block for easy maintenance

• Pressure & Temp.Compensation
• mA,Volt,Pulse-Flow Input
• Dual Six Digit displays
• Battery backed Totalised Counter
• Flow Computed re-transmission Output
• Front Panel Programmability
• Tamper proof Software Calibration
• Set of Powerful modules
• Wide Supply tolerance-90 to 270V.

• Universal Inputs
• 16 Bit Sigma Delta A/D
• Inter Channel Isolation
• Dual Redundant Com Ports
• Easily Expandable
• MODBUS Connectivity.

• Universal Inputs - mA, Volt, pulse .
• Dual Six digit 8 mm LED displays.
• Accepts auxiliary process inputs.
• Universal retransmission output.
• Battery backed totaliser counters.
• Alarms for Flow rate and Counter.
• Fully front panel programmable.
• Tamper proof Software Calibration.
• Set of Powerful Software Modules.
• Wide supply tolerance - 90 to 270V.

• Microcontroller based design
• Configurable through configurator
• One model for both T/Cs & RTDs
• Linearisation of T/C and RTD inputs
• Realistic Cold Junction Compensation
• Input to output isolation
• IP-65 weather proof enclosure.

Microcontroller based designOccupies just 22.5mm of Din railPlug in terminals for easy replacementAccepts 9 types of T/Cs & Pt,Ni RTDsLinearisation of T/C & RTD inputsOptoisolated outputConfigurable through configurator.

• Communication through Hart modem
• Remote Configurable through configurator
• One model for both T/C & RTDs
• Linearsation of T/C and RTD inputs
• Realistic Cold Junction Compensation
• Input to output isolation
• IP-65 weather proof enclosure

Wide choice of Input Types.
Software selectable mA & V output.
Three Port Isolation.
Linearisation of T/C and RTD inputs.
Realistic Cold Junction Compensation.
Fully Configurable through Keypad.
Accepts non-standard Signal Inputs.
Powering Options: 20-35V DC / Mains.
Dual output Model available

Microcontroller based electronics.
Wide choice of Inputs mA/mV/V.
Field selectable mA & V output.
Three Port Isolation.
Optional Dual output.
Trimpot free Ranging.
User Friendly LED navigation.
Powering Options: 20-35V DC / Mains.

SmartindUniversal Inputs - T/C, RTD, mA, V.
Dual Input and Dual Indication.
Potential Free contact outputs.
Fully Front panel Programmable.
Isolated Retransmission output.
Tamper Proof Software Calibration.
Wide supply Tolerance- 90 to 270V.
Set of Powerful Software Modules.

Indicating Trip Module.
Wide choice of Input types.
Linearisation of T/C & RTD inputs.
Square rooting of mA & V inputs.
Fully programmable through keypad.
Setpoint / Indication in Engg. units.
Two potential free contacts.
Din Rail / Back panel mounting.

The Controller range has Single loop PID controllers with Dual or single indication and on-off controllers or Trip Modules. The PID controllers are capable of giving 4-20mA control output or contact output.

Wide choice of Input types.
Built-in Transmitter Powering.
Configurable control parameters.
Autotune capability.
Control output options.
Contact / Analog ouput options.
5 digit Dual display.
Linearisation of T/C & RTD inputs.
Realisitic cold junction compensation.
Display in Engineering units.
Bumpless auto manual transfer.

Dual Redundant Hardware
High Input Impedance
Independent Power Supply CKTS
Enhanced Reliability
Short Ckt Protected Outputs
Three Port Isolation
Excellent DC and A.C.Performance
Bi-Polar I/P & O/P
Wide Bandwidth

Excites upto 8 Load Cells
High Sensitivity : ±1 Count / mV
High Stability 18 bit Conversion
Load Cell Non-Linearities Compensated
Battery backed 'TARE' facility
Programmable Software Filter
5-digit LED display
Two Potential free Alarm Contacts
Optional - mA / V Output (Isolated)
Optional - MODBUS connectivity to
DCS/ PLC/ SCADA.

• Very High Accuracy
• Microcontroller based design
• Configurable through configurator
• One model for both T/Cs & RTDs
• Linearisation of T/C and RTD inputs
• Realistic Cold Junction Compensation
• Input to output isolation
• IP-65 weather proof enclosure