Meditek Speciality

These Floor Model centrifuges are designed for Blood Bank applications. The heavy duty steel fabricated centrifuge is provided with stainless steel inner chamber and effectively insulated to provide sufficient cooling of the chamber. The features include 30 Program Memory, CFC Free cooling system with pre-cooling facility, Isolated cooling control allowing continuous cooling when the centrifuge is switched off by the timer, Maintenance free brush less induction motor drive, Electronic lid lock with facility to open in case of power failure, Rotor identification, Working RCF read out, Rotor Speed Range from 100 to 4500 RPM in 10 RPM increment, 1-120 Minutes timer with 1 minute increment and remaining time indication, Acceleration/Deceleration time in the range of 100 to 240 seconds and indication of Rotor in Motion, Imbalance and auto cut off, Safe lid open and Mechanical lid lock for increased safety.

A range of centrifuges for general purpose use in Pathology Labs, Small Hospitals Schools and Colleges. The centrifuge with 5 step speed regulator is provided with Fixed Angle Rotor Head.

Meditek Speciality Centrifuges are designed & developed for centrifuging larger volume centrifuge tubes, bottles, blood bags etc. The sturdily built unit is fabricated from steel and epoxy powder coated with stain less steel table top. The unit is provided with control panel with step less speed control,digital speed indicator, and 0-99 minutes digital timer with a bypass switch for operating beyond 99 minutes and automatic switching off alarm signal and digital temperature control cum indicator (for model RC 7500). The unit is also provided with dynamic brake, zero start interlock , lid locking switch and safety cut off in case of imbalance.

The range of centrifuges are designed for general purpose application with the facility of inter-chargeable rotor heads. The features available with.
Model TC 450 A - Step less speed regulator and On/Off switch.
Model TC 450 C - Step less speed regulator, analogue speed indicator, 0-60 Mts. preset timer with by-pass switch and On/Off switch.
Model TC 450 D - Step less speed regulator, Digital speed Indicator, 0-99 Mts. Digital timer with by-pass switch and On/Off Switch.
Model TC 450 S - Programmable step less speed regulator with digital speed indicator, digital display of working RCF value, programmable acceleration /acceleration setting, 1-99 minutes preset digital timer, lid lock, imbalance safety cut off, and zero start interlock.

The range of centrifuges are designed for large volume centrifuge tubes for low speed applications. Different models with their features are:
Model TC 8100 D-With step less variable speed control, digital speed indicator, 1 to 99 minutes digital timer cum indicator with by-pass switch in for infinite time run, dynamic brake, zero start interlock, imbalance detection and safety switch off mechanism, lid lock switch.
Model RC 8100 D -With step less variable speed control, digital speed indicator, 1 to 99 minutes digital timer cum indicator with by-pass switch for infinite time run, alarm at automatic switching off by the timer, dynamic brake, lid locking switch, zero start inter lock, imbalance detection and safety auto switching off mechanism. The cooling of the stainless steel chamber is provided by CFC free cooling system with digital temperature control cum indicator. Working temperature inside the chamber in the range of -10 °C to + 40 °C depending on the capacity and speed of the rotor head.
Model TC 8100 F - Environment Friendly Model with brush less low noise A.C. Induction motor and inverter drive, digital speed indicator, 1 to 99 minutes digital timer cum indicator with by-pass switch for infinite time run, imbalance detection and auto switch off, lid locking switch, zero start interlock and dynamic brake.
Model RC 8100 F- Environment Friendly Model with brush less low noise A.C. Induction motor and inverter drive, digital speed indicator, 1 to 99 minutes digital timer cum indicator with by pass switch for infinite time run, imbalance detection and auto switch off, lid locking switch, zero start interlock and dynamic brake. The cooling of the stainless steel chamber is provided by CFC Free cooling system with digital temperature control cum indicator. Working temperature inside the chamber in the range of -10 °C to + 40 °C depending on the capacity and speed of the rotor head.

A range of centrifuges for general purpose use in Pathology Labs, Small Hospitals, Schools and Colleges. The centrifuge with 5 step speed regulator is provided with Horizontal (Swing Out) Rotor Head.

These centrifuges are designed for use of micro tubes - small capacity tubes, with the facility of inter-changeable rotor heads. The features available with different models in the range are:
Model TC 4815 - Step less speed regulator, analogue speed indicator, 1-60 Mts. preset timer with by-pass switch and On/Off switch.
Model TC 4815 D - Step less speed regulator, Digital speed Indicator, 1-99 Mts. Digital timer with by-pass switch and On/Off switch.
Model TC 4815 S - Programmable step less speed regulator with digital speed indicator, digital display of working RCF value, programmable acceleration / deceleration setting.
1 to 99 minutes preset digital timer, lid lock, imbalance safety cut off, and zero start interlock.
Model RC 4815 S - Programmable step less speed regulator with digital speed indicator, digital display of working RCF value, programmable acceleration / deceleration setting,
1 to 99 minutes preset digital timer with by-pass for infinite time run, alarm at automatic switching off by the timer, zero start interlock, CFC Free cooling system with digital temperature control cum indicator with working chamber temperature in the range of -10°C to + 40 °C, imbalance safety device with auto switch off and lid locking switch. The centrifuging chamber is made of stainless steel.

The range of centrifuges are designed for general purpose application with the facility of inter-changeable rotor heads. The features available with different models in the range are:
Model TC 650 A - Step less speed regulator and On/Off switch.
Model TC 650 C - Step less speed regulator, analogue speed indicator, 0-60 Mts. preset timer with by-pass switch and On/ Off switch.
Model TC 650 D - Step less speed regulator, Digital speed Indicator, 0-99 Mts. Digital timer with by-pass switch and On/Off switch.
Model TC 650 S - Programmable step less speed regulator with digital speed indicator, digital display of working RCF value, programmable acceleration/deceleration setting, 1-99 minutes preset digital timer, lid lock, imbalance safety cut off and zero start interlock.

Model TC 605 A and TC 725 A are centrifuges designed for Pathology Labs, Hospitals, Blood Banks etc. where large number of low volume samples are to be centrifuged. The centrifuge is provided with step less speed regulator and 1 to 60 minutes preset timer with by pass switch and Fixed Angle Rotor Head to carry 5 ml disposable tubes.
Model TC 725 S is provided with programmable step less speed regulator and digital speed indicator, Digital display of working RCF Value, acceleration and deceleration settings, 1 to 99 minutes digital timer, imbalance safety device and zero start interlock.

Model RC 650 S- Programmable step less speed regulator with digital speed indicator, digital display of working RCF value, acceleration / deceleration setting, 1-99 minutes preset digital timer cum indicator, alarm at automatic switching off by the timer, zero start interlock, CFC Free cooling system with digital temperature control cum indicator with working chamber temperature in the range of -10° C to + 40 °C, imbalance safety device with auto switch off and lid locking switch. The centrifuging chamber is made of stainless steel.