Adopting economy and space saving concept, we introduce tender care range of intensive care radiant heat warmer, which is a simple and convenient way of management in hypothermia & hypobilirubinaemia. Ergonomically designed & extensively tested, we can offer these intensive care radiant heat warmer in different combination. Further, these can also be offered with or without phototherapy to suit the thermal requirement of hyperubin high-risk, low birth weight infants.

Features:

• Available with various combination of baby beds
• Heating Box is Swivel type / Height adjustable to take X-ray
• Full cradle length Heaters to avoid hot and cold zone in cradle thus providing uniform heat over entire mattress
• Spark Proof Quartz / Ceramic Heating System
• 800 Watt Quartz Infrared / Ceramic Heaters Provide Optimal environment

• It is a simple low cost warmer
• The warmer is intended for short term & procedural care (e.g Emergency Resuscitation in Delivery Room / Operation Theater of Maternity Homes) where permanent wall installation is desirable

• Model on Front Page: Export Quality Radiant Heat Warmer with Fixed Bassinet.
• Model A: Radiant Heat Warmer Stand.
• Model B: Radiant Heat Warmer with Infant Care Trolley.
• Model C: Radiant Heat Warmer with Oval Trolley.
• Model D: Export Quality Radiant Heat Warmer Fixed Bassinet with Three Drawers.
• Model E: Export Quality Radiant Heat Warmer Fixed Bassinet with One Drawers.
• Model F: Height Adjustable Radiant Heat Warmer Stand.

• The warmer source unit features latest technology in heating systems
• We offer two types of full cradle length heating system with full parabolic reflectors & safety guards

Precise Cradle Temperature Control:

This feature utilizes intelligent circuit to prevent overshoot & maintains cradle temperature within +/- 0.2°C of present level, thereby stress on infant due to variations in cradle environmental temperature minimizes. It always acts as WATCHDOG as an Air over temperature Cutoff when system operates in Servo mode.

Manual Warming Facility:

Provides user selectable Heater output for pre-selectable interval of time when instant and simple heating is required during emergency/resuscitation procedures.

"For further details see attachment"

Neonatal resuscitation unit offered by us come with CPAP module, oxygen administration facility, low pressure slow suction and warming facility with infrared radiant heat source. Its modular construction as well as a wide range of controller selection option starting from basic air temperature controller (to control cradle temperature) to latest microprocessor based intensive can temperature controller with easy view display makes them one of the most preferred in the markets.

Mechanical Specifications:

• Convenient working level with 6mm thick imported acrylic collapsible side support
• Accessible from all sides
• Acrylic Tray with Foam mattress
• Trays & structure fabrication in steel
• IV pole & Facility to take X-ray
• Head up /down facility (continuous variable)
• 3 Drawer storage cabinet mounted on heavy duty casters

• Power Source: 230 VAC +/-10%, 50Hz.
• Control Method: Proportionate Power Control
• Heater Capacity: 600 Watts
• Light Source: 60 Watts bulb to Examine babies
• Power Consumption: 850 Watts

• Skin +1°C HI
• Skin -1°C LO
• Skin >38°C OVR
• Skin/Air Sensor Failure PRB
• Power Failure: Audio Visual
• Resolution: 0.1 °C
• Accuracy : 0.1 °C
• Air +1.5°C HI
• Air - 3°C LO
• Air > 39°C OVR
• Heating Failure HEAT OFF

• Skin > 38°C
• Air > 39°

• On Front Page: Neonatal Resuscitation Unit Fixed Cradle without CPAP with 1 Drawer & Storage Capacity
• MODEL A: Neonatal Resuscitation Unit Fixed Cradle with CPAP with Under Surface Phototherapy
• MODEL B: Neonatal Resuscitation Unit with CPAP with Trolley
• MODEL C: Neonatal Resuscitation Unit Fixed Cradle without CPAP
• MODEL D: Export Quality Neonatal Resuscitation Unit Fixed Cradle without CPAP with 3 Drawers

• Controlled Resuscitation with CPAP module
• Oxygen administration facility
• Low pressure slow suction
• Warming with Infrared Radiant Heat Source

• Ambulance
• Passenger Car
• Inter-departmental transport in the hospital

• Transparent hood structure for immediate visual checkup and reduces Radiant Heat loss by the infant
• Thermal Maintenance by digital temperature controller
• Dual safety mechanism is provided to monitor both rises in incubator & temperature over heating of heater
• Standby heating function
• Different power source may be used
• Compact, Light weight and Sturdy
• The trolley equipped with a smooth up and down mechanism

• Electrical Requirement: 12 V DC Car battery or 230 V AC
• Display: Skin or set temperature on large bright Led display
• Temperature Controller: Electronic Temperature Controller
• Optional Accessories: Oxygen powered suction, Oxygen Powered CPAP Resuscitator
• Heating Controller: Electrical & Battery operated
• Alarm: Over temperature alarm for skin temperature
• Dimensions: L 40" x W 18.5" x H 48"

• Continuous Monitoring of Respiration Rate of the Baby
• Audio-visual alarm of Apnea, i.e. if Breathing Stops
• Settable High and Low Respiration Alarms
• Mains and battery Operation Facility

• Range: 0 to 120 Breaths per Minute.
• Accuracy: +/-2 Breaths above 30 Breaths per Minute.

• High: 60to 120 Breaths per Minute
• Low: 0 to 60Breaths per Minute
• Delay: 5,10,15,20,25, 30 seconds

• Stainless Steel Removable sub assemblies like Baby Tray and Blower System for ease of Disinfection/Fumigation
• Main Cabinet Fabricated in Mild Steel painted with Epoxy Paint
• Acrylic Canopy with front admittance and 4 port holes. Excellent access and sealing through gloves on port holes
• Fresh air ventilation through filter
• Humidity indication by Hygrometer
• Inlet for Oxygen, I.V. Fluids
• Respiratory tubing and Ancillary Probes or electrodes
• I.V. Stand facility
• Single Spacious Storage Cabinet

• Temperature Controller: Servo Proportionate Controller
• Skin Mode Control: Body Temperature to 38°C.
• Air Mode Control: Canopy Temperature to 39°C.
• Resolution: 0.1°C
• Accuracy: +/- 0.2°C

• Skin +1°C Audio visual alarm
• Skin -1 C Audio visual alarm
• Air >39°C Audio visual alarm
• Power Failure Audio visual alarm

• When Skin Temperature exceeds 38°C
• When Air Temperature exceeds 39°C
• Power Source: 230+/-10% Volts AC 50 Hz
• Power Consumption: 600 Watts
• Heater Capacity: 500 Watts

• Temperature Controller: Air Proportionate Controller
• Control Range: Canopy Temperature to 39°C
• Resolution: 0.1 °C
• Accuracy: +/- 0.2°C

• Air >39°C Audio visual alarm
• Power Failure Audio visual alarm

• Air Temperature exceeds 39°C
• Power Source: 230+/-10% Volts AC 50 Hz.
• Power Consumption: 600 Watts
• Heater Capacity: 500 Watts

• Silicone Autoclavable Resuscitation bag ( any one Bag as shown above) with 40cm H2O safety valve
• Tube and Reservoir Bag

• Sizes 00 & 01

• Foot operated, Mucus Trap

• Silicone autoclavable sizes 000, 00, 0

• Penlight Handle, Blades Straight (Miller) Sizes 0 and 1, Curved ( Mac) Size 2

• Sizes 2.5,3.0,3.5,4.0 with malleable stillette and polycarbonate connectors

Widely used for preventing and treating hyper-bilirubinaemia, we offer various phototherapy units models that are highly effectively in providing phototherapy units to neonates under different nursing conditions. These phototherapy units are designed as per international standards and come with blue tubes of wavelength in the range of 400 to 520 mm as well as with the combination of day light tube.

Features of Phototherapy Units:

• Effective irradiance
• Good color radiation
• Longer tube life
• Elapse time indicator (optional)
• Safety shield
• High lux phototherapy with mirror coated filters
• Easy positioning allowing illumination from any angle thus allowing its use with infant warmers
• Available with overhead source & under surface source
• Models available with DIGITAL BILI TIMER

• Focused blue light
• Longer life
• Separate white tubes
• Efficient heat management
• Compact designs
• Zero maintenance
• Noise free operation
• Easy to operate
• Available with digital bilimeter
  

• Premature
• full term baby

Wall Mounting Phototherapy Unit:

It is a simple low cost phototherapy option for hospital/ institutions / nursing homes where space is a major concern.

Features:

• Permanent fixture on wall
• Two, 2 feet TLD Daylight tubes and Two, 2 feet blue tubes
• Clear filter
• Extra blue tubes as per custom requirement
• Unit available in mild steel (powder coated) fabrication

• Model A : Phototherapy Stand
• Model B : Single Surface Phototherapy
• Model C : CFL Phototherapy Stand
• Model D : Double Surface CFL Phototherapy

• Displays total hours of tube light life up to 3000 hours
• Baby exposure hours or baby phototherapy hours
• Utility Timer 1 - Stop watch for pulse rate measurement
• Utility Timer 2 - Reminder Timer for feeding / medicine dose timing
• Utility Timer 3 - Tube Hours can be set as per requirement
• Useful in calculating total radiation dose
• Available in all models of phototherapy
• Modules available for existing phototherapy

• Overhead source unit & infant care trolley
• Double Surface Phototherapy consists of:
• Overhead source unit and infant care trolley with either
• Fixed Under surface Source
• Portable Under surface Source

• Specially designed Oil free Pump with motor
• Separate non-motorized low power suction for neonates
• Maintenance free
• Electrically operated
• High Vacuum for children
• Low power vacuum for neonates

• It is compact and portable
• Maximum negative pressure up to 110 mm of Hg
• Provided with pressure regulator
• Dial for continuous monitoring of vacuum in mm of Hg
• Unbreakable, Transparent, Auto cleavable polycarbonate fluid JAR
• Operating voltage 220v+/-10% AC
• Available in Portable & Trolley model

• Frame work is made of powder coated aluminum fabrication (No rusting for life time)
• Spring is made up of Stainless Steel material for long wear and tear
• High quality rubber parts and accessories
• Unbreakable, Transparent, Auto cleavable fluid JAR

• Continuous Air Cleansing
• Completely Safe (No Chemical Contamination)
• Highly Effective
• Fumeless and Odorless
• Portable and mounted on Trolley
• Specially designed to suit your needs
• Ecologically friendly
• Electric Safety

• ECO friendly Air sterilizer is a silent & ideal partner for dynamic sterilization
• Used at medical sites like NICU, ICCU, ICU, Operation Theater, Post Operative Wards, Trauma Wards & Casualty rooms
• Suitable for small rooms in Laboratories / Pathology, Microbiology dept. where bacteria or microorganism free air is desired
• Used at homes in a closed especially for allergic patients suffering from respiratory diseases like Asthma
• Can also be used by patients suffering from AIDS to protect from infection
• Ideally suited in Dental Clinic, Physicians Clinic to guard against cross infections from patients

• Its UV rays are kept inside equipment and are prevented from being released outside
• Special measures are taken to prevent direct radiation and hence this unit can be kept on even during Operation or in ICU's, if required continuously
• This unit can be mounted on wall or kept on table ensuring free flow of air from the front (air can therefore be continuously treated even in presence of people the main vehicle of air)

We offer clients advanced technology based apnea monitors. These apnea monitors are microprocessor based are are designed to deliver optimum functionality standards in the given operations. Our process expertise also allow us to carry out in them desired changes and update them with new features as per the changing demands of the medical fraternity.

• An all-in-one model that caters to all the requirements of human weighing
• Designed for convenient weighing of neonates in supine position, infants in sitting position and adults in standing position