Meedo Tools

Extra 6mm square high speed parting/turning tool bit for use with #82511 Cutter Set.

Rectangular Tool Bits quality high speed steel. This is recommended for use on non-ferrous metals only which are basically soft or have low final strength.

Quality: 1.3207 (HSS-E)
Height tolerance: H13
width tolerance +- 2 mm
Härte = 64 - 67 HRC
available Length in mm:
50 - 100 - 150 - 200 - 250
for turning, boring out, grooving etc; especially for grinding as profile cutters
very high wear resistance and long tool life.
For use at high cutting speeds and for steels that are difficult to machine

the square tool bits we offer are designed for perfection and are appreciated for the durability, sturdy construction and reliability. These square tool bits are fabricated using qualitative raw material procured from reliable vendors.

Chrome Alloy Die Nut.

they are also high speed operators to be used on all types of material.

Convex cutters operate on a very high speed for cutting gear teeth.

cylindrical cutters which is available in various sizes and specifications. These are widely used for surface cutting and finishing in all types of materials and are offered in highly competitive prices. Our cylindrical cutters are known for their various notable features such as dimensional accuracy, corrosion resistance and optimum performance.

Double angle cutters are used for serrations, grooves and other angular surfaces.

which is highly acclaimed for its dimensional accuracy and longer service life. These angle cutters are widely used in general purpose machines for various applications and are available at a highly affordable price. To meet the variegated requirements of our clients, we offer customization facility on our range of product.

Single cutters are used for bevelling, they can be produced in single right and left angle.

• Designed for Counter Sinking Holes for Centers or for enlarging existing hole
• Odd number of Flutes eliminates Chatter in most applications, while providing better accuracy than a Single Flute Countersink
• Spiral Flute is ideal for difficult-to-cut materials, interrupted Cuts and Chip removal from blind holes.
• Available in 60°, 82° or 90°
• Made from High Speed Steel

our boring mills work in an envelope of 12ft. X 10ft. X 54 inches depth.

slotting cutters

• kvns a2™ very narrow slotters for all flat-bottom and cut-off operations.
• kssm™ features patent-pending rapid cam adjustment mechanism.
• adjustable or fixed pockets.
• superior surface finishes.

roll forged or fully ground

material: f4341,4341,9341,m2,m42,m35

point angle: 118degree or 118/135 degree(split point)

flute: n or va (parabolic)

standard: din338

taper shank twist drills din 345 taper shank drill twist drill size 6 0 mm -120 0 mm x 0 5 mm

core drill are cutting tools used to create cylindrical holes. Bits are held in a tool called a drill, which rotates them and provides torque and axial force to create the hole. Specialized bits are also available for non-cylindrical-shaped holes.

Range : 2 - 150 mm.
Method:Base on EA-10/10

taper shank machine reamer - Spiral flute.

Used for opening out and finishing existing holes to H7 tolerance in most ferrous and non-ferrous metals.

Flute Geometry - 7º Helix Left hand spiral.
Bevel Lead - 45º a Side

To obtain the best results when using reamers it is essential to make them work. It is a common fault to prepare holes for reaming with too little stock left in. If insufficient stock is left in the hole before reaming then the reamer will rub quickly, show wear and will result in loss of diameter. It is equally important for performance not to leave too much stock in the hole.

reamers must combine both hardness in the cutting edges, for long life, . . . . Spiral fluted machine reamer. A machine reamer only has a very slight lead in.

General hand reaming

the h. T. M. Universal tool & cutter grinder is a robust machine capable of dealing with a wide range of tool and grinder operations. It is available as a steel cabinet mounted ,machine and is designed for the rapid sharpening of h. S. S milling cutters, spiral mills, metal slitting sew, and face cutters, reamers, tap and with suitable attachments lathe tools, end mills, formed cutters etc.

circular thread rolling dies for Precision Thread Rolling of Fasteners, auto-parts and components. These rolls are Generally made from Cold work Tools Steel

• design for use in turret lathes, screw machines, drill presses.
• ground with a 45° chamfer, suitable for reaming most materials.
• available in straight or spiral flute.
• use for difficult to ream materials.
• made from high speed steel.

face cutters are extensively used in the production such as tool & cutter grinder milling machine, lathe machine, hexwa machine and beach grinder machine and are available in varying diameters and widths. Our products are manufactured using top quality raw material and are known for their excellent performance and optimum quality.

slotting cutters are supplied from 50mm dia (2”) to 150mm dia (6”) and thickness from 6mm (1/4”) to 25mm (1”)

• Use to Ream holes for Standard Taper Pins
• Have a taper of 1/4" to the foot (1 in 48)
• Available in Straight, Spiral or Helical Flutes
• Straight and Spiral Flute are intended for hand reaming in easy to ream materials
• Helical Flute is designed for Machine Reaming
• Made from High Speed Steel

FLAT THREAD ROLLING DIES
STRAIGHT KNURLING
DIAMOND KNURLING.