Metafab Engineers, FaridabadMetafab Engineers, Faridabad

Our Collection
Walking sincerely on the path of designing an accurate With an aim to provide complete customer satisfaction, we managed to design and develop an exquisite range of servicing equipments for automobile servicing workshops. Surging in the markets with our consistent efforts, we present the following products to our clientèle for all their requirement related to workshop automation:


Pneumatic Hanger / Component Hanger
Pneumatic Hanger / Component Hanger

We offer a host of high quality pneumatic / component hangers to our prestigious clients. These pneumatic hangers are efficiently designed and perfected by our dexterous designers and engineers based on the requirements of the clients and keeping in view their manufacturing standards. It is designed with a simple wall mounting structure and an efficient inbuilt pneumatic system. Through these two hose reels are provided with two Blow guns so that one unit of pneumatic hanger can be used for servicing of two different bikes on separate ramps. It is pre-installed with a lubricator to increase the efficiency and life of both the Blow guns.

Ask for Quote


Hydro Electric Ramps

The hydro electric ramps provided by us are designed perfectly by our engineers to suit the requirements of our esteemed clients related to the automotive servicing industry. These ramps consist of a lift table facilitated with an inbuilt sliding mechanism to facilitate the parking of bikes on them. These hydroelectric ramps are also equipped with a center stand and a vice to provide support to the center stand and front wheel of the bike. We have equipped it with a power pack to energize the lift table cylinder for up and down movement of the lift table. The ramp of the power pack, with its feature of manual operation can also be operated in the case of power failure. These hydroelectric ramps are available in four models listed below:

• Standard Ramp
• Express Ramp
• Manual Ramp
• Collapsible Ramp

Hydro Electric Ramps
Ask for Quote


Hydraulic Power Pack
Hydraulic Power Pack

We also design hydraulic power packs for various requirements of our clients all over India. These hydraulic power packs are used for different purposes in the automotive servicing workshops. These power packs are designed for inciting the lift of ramps etc. efficiently and according to the requirements of our clients. These specially designed power packs are equipped with operating valves to operate their motors like Solenoid, Hand Lever Valve and Niddle Valve. Our Power packs are available with both automatic and manual arrangements so that the workshop operations are not hindered due to power failure.

Ask for Quote


Engine Working Station

This special workstation is designed for operating the engine in the service station .This work station is equipped with all necessary equipment's & arrangement for operating the engine. It helps the mechanics to service the engine in a healthy and safe environment as it is The Heart of the Bike, so it becomes more important to handle "This Mechanical Heart" of the bike in the most efficient manner to provide excellent service to the customer.

Engine Working Station
Ask for Quote


Wheel Rim Truing Fixture
Wheel Rim Truing Fixture

We offer a hi-tech fixture for checking & correcting the distorted rim of a motorcycle wheel. These rim truing fixtures are used to accurately correct the distortion in the rim and bring them back to their original shape. These fixtures are designed in a way to accurately measure the extent of running out and wobbling in the wheel through two dial gauges that are mounted on the special locations.

Our designers have designed these fixtures with a detail on its every aspect and their dial gauges are placed outside the direct contact of the rim in order to prevent any kind of damages to them.

Ask for Quote


Tools Trolley / CO-Analyser Trolley

We offer specially designed tools trolley which are used for keeping the most expensive and sophisticated tools at a safe place that are to be utilized in a service station during servicing of a two wheeler. These trolleys are designed by our engineers keeping in view the most important and common tools that are used while servicing. These are often equipped with PU inserts to assist in maintaining proper inventory control of the tools. Along with it, they are provided with enough space to place the entire dismantled engine and its important components and a writing base to help the mechanics to write anything neatly.

The compact trollies manufactured by us are very important to carry all the expensive equipments and tools used in the workshop, also called Co-analyser. These trolly's are also equipped with a power box to supply electricity to the printer and the co-analyser.

Tools Trolley / CO-Analyser Trolley
Ask for Quote


Pneumatic Waste Oil Collector
Pneumatic Waste Oil Collector

A special product called pneumatic waste oil collector is manufactured and designed by us to lessen the inconvenience faced by the service station mechanics while changing the engine oil of the two wheelers. All the components of this collector like oil cylinder, measuring jar and steel tray are designed accurately from the finest materials to efficiently cater to the requirements of our clients. It is provided with a small measuring jar in order to check the oil level and the impurities present in it before draining it out from the tank. The waste oil is collected into the main tank through an adjustable stainless steel tray and a oil level tube is fixed with it to indicate the level of oil present in the main tank.

Ask for Quote


Automatic Waste Oil Disposer

One of the common problems of the workshop of a service station is to dispose off the waste oil. To overpower this problem, we have designed an automatic equipment that can efficiently dispose off the waste engine oil filled in it through its internal disposal processes. The operations of this equipment is automatically controlled and is very accurately designed with a large storage capacity. It helps our clients in keeping their workshop's environment hygenic and clean.

Automatic Waste Oil Disposer
Ask for Quote


Battery Charger & Tester
Battery Charger & Tester

The battery charger provided by us to the clients, is designed to assist our clients in charging the batteries of the two wheelers that are brought into the workshop for overhauling. These battery chargers are designed in a way to make them capable of charging eighteen batteries at a time. We have equipped it with twelve stations with a charging current of 0.25 and 0.5 ampere and six other stations with a charging current of 0.75 and 1 ampere. Along with it, we also manufacture battery tester for small workshops that are used to check the bearable load and condition of the two wheeler batteries, through a load tester provided with the unit.

Ask for Quote


Air Drying Unit

The air drying unit is manufactured by us and designed to make the mechanic able to dry the bike after washing it. Our equipment is designed in a way so that it can be mounted easily on a wall near the washing bay, without occupying any floor area. It is operated with a push button switch and is provided with a nozzle through which a stream of pressurized warm air comes out to make the bike dry quickly and to prevent any occurrence of rust and corrosion. While designing these units we have taken care of incorporating all the safety measures to avoid any mishap and provide ultimate satisfaction to the clients.

Air Drying Unit
Ask for Quote


Auto Controlled High Pressure Bike Washer
Auto Controlled High Pressure Bike Washer

We specialize in manufacturing auto controlled high pressure bike washer used in the service stations for washing the bikes. These high pressure washers are operated by a light weight motor and compact equipped with a triple piston design. They are also provided with polymer wheels to impart them mobility. The outlet water pressure of these washers can be adjusted accordingly to suit its various application areas. The by-pass return mechanism incorporated into it makes it consume very less water. Moreover these washers are designed with perfection to minimize noise and vibrations so that they can be used in different environments.

Ask for Quote


Multi Jet Washer

Often in the service stations there is a need of cleaning the dismantled parts and small components of the two wheeler engine before they are finally re-assembled. So, we have come up with a multi jet washer which uses kerosene oil as a media for cleaning these components through a high pressure multi jet sprayer provided inside the chamber of the unit. The cleaning job is assisted by a special blowgun and nylon brush. The wastage of kerosene oil used in cleaning is prevented through the availability of special filters provided at the outlet and inlet of the unit.

These washers are also provided with an additional accessory that is the rotary disc with the help of which a heavy component of up to 25 kg can be loaded into it for cleaning purposes.

Multi Jet Washer
Ask for Quote




Catalog
Member IndiaMART.comCopyright © Metafab Engineers, Faridabad, All Rights Reserved (Terms of Use)
Developed by IndiaMART InterMESH Limited