We are one of the leading manufacturers of lifting equipment such as two post lifts, four post lift and alignment scissor lift. Designed in compliance with international quality standards, the lifting equipment are available in various lifting capacities as per application requirement. The base plate free design of two-post lift enables easy working under the car, while the asymmetrical design of posts provides wider drive through clearance. Provided with electro-hydraulic power system, the scissor lift maximize the efficiency of workshop and enhance easier operation.

The features of various lifting equipment are given below:

Two post lifts

Features:

• Asymmetrical design of posts provides wider drive through clearance
• Electromagnetic valve controls the safety lock release from one side
• Base plate free design makes easy working under the car
• Limit switch on the top ensures safety to vehicles
• Lifting height max 2000mm
• Minimum height 120mm
• Three stage lifting arm structure accommodates small vehicles
• Screw type adapters

Four post lifts

Features:

• Lifting capacity from 3t to 6t is available
• 1850mm basic lifting height
• 4800mm runways, (different runway length sand column size can be supplied on request)
• Hydraulic/Electro control system
• Lifting time : 55-65secs
• Ramps included in price

Alignment scissor lift

Features:

• Electro-hydraulic power system
• Four cylinder structure ensures safe operation
• 3-ton lifting capacity
• Small frame size, only 115mm when installed
• Easy operation
• Surface mounted, step by step installation and operation guide provided
• Scissor lift is designed to maximize the efficiency of your workshop and all to work all around a vehicle without hurdles

With the assistance of our engineering excellence, we have emerged as a renowned manufacturer of wheel balance. Available in various models, our wheel balancer are provided with high-capacity and high-stability microprocessor control. Equipped with inch to millimeter and gram to ounce conversion function our balancers also have self-calibration and self-diagnosis functions. Our wheel balancer is provided with safety guard switch for operator protection and second brake function for fast and accurate results.

The features of our various wheel balancers are as follows:

Car wheel balancer (mt-wb-650)

Features:

• 3-ALU program and static programme
• Equipped with inch to millimeter and gram to ounce conversion function
• High-capacity and high-stability microprocessor control
• Self-calibration and self-diagnosis functions
• Equipped with safety guard switch for operator protection

Car wheel balancer (mt-wb-650pb)

Features:

• Equipped with inch to millimeter and gram to ounce conversion function
• 3-ALU program and static program
• Self-calibration and self-diagnosis
• Electrical parts are imported, the microprocessor is composed of integrate circuit, with high-capacity and high-stability
• The designed second brake function makes the operation quick and accurate
• Maximum diameter inside the cover is 1200mm

Car wheel balancer (mt-wb-650c)

Features:

• Equipped with safety guard switch for operator protection
• Second brake function for fast and accurate results
• Maximum wheel diameter inside the cover is 1000mm
• High-capacity and high-stability microprocessor control
• 3-ALU program and static programme
• Equipped with inch to millimeter and gram to ounce conversion function
• Self-calibration and self-diagnosis functions

Car wheel balancer (mt-wb-650ds)

Features:

• Self-calibration and self-diagnosis functions
• High-capacity and high-stability microprocessor control
• 3-ALU program and static programme
• Equipped with inch to millimeter and gram to ounce conversion function
• Equipped with safety guard switch for operator protection
• Second brake function for fast and accurate results
• Value A and D can be input automatically, making the operation easier

Catering to the requirement of automobile industry, we have been engaged in offering tyre equipment. Our range including tyre changer, pneumatic tyre spreader and pneumatic tyre and wheel lift are manufactured to meet the defined process demand. The tyre changer is capable of handling rims without adding any additional accessory.  The vertical manually - operated tyre spreaders are widely used for all type of tyre from cars to light truck.

The features of our tyre equipment are given below:

Tyre changer MT-TC-550AT +Ha1

Features:

• Multi-step control pedal, help mount tyres easily and precisely
• Clamping arm of press formed 5mm steel plate ensure strong tyre holding
• Tool box under the vertical arm and bead breaker is convenient for putting tools and parts
• CE compliant air tank
• Helping arms, can handle the low profile, stiff tyres. Third help arm is optional
• Washer and scale on the turntable are replaceable wear parts
• Pneumatically tilt able vertical arm saves operation time

Tyre changer MT-TC-550SA

Features:

• MT-TC-550S a semi-automatic tyre changer, is suitable for handling 10 – 23 (250-585mm) wide, low profile and stiff tyres
• Capable of handling 20 (500mm) rims without any additional accessory
• Protection against biting for the clamp, the lever, the mounting head and the bead breaker shoe (which can prevent rim damage by improper handling) are available optionally
• Multi-step foot pedal control can stop the clamp at any position
• Helping arm control pedal for anywhere clamping is also available as option

Tyre changer MT-TC-550AT

Features:

• MT-TC-550AT full-automatic tyre changer, is suitable for handling 10 – 23 tyres, (250-585 mm)
• Capable of handling 20 (500m) aluminum rims without adding any additional accessory
• Multi-step foot pedal control can stop the clamp at any position
• Protection against biting the clamp, the lever, the mounting head and the bead breaker shoe, (which can prevent rim damage by improper handling) are optional

Tyre changer MT-TC-680SA

Features:

• Universal self-centering chuck with clockwise and anti-clockwise rotation

Pneumatic tyre spreader:

• The air powered tyre spreader (pedestal Base) is designed for clamping, spreading and lifting car tyres during repair
• One can also do trye inspection cutting, buffing with dust extraction, insert tubes and patching

Pneumatic tyre and wheel lift (MT-850 ptls)

Air Operated and wheel lift

• Very easy to use, MT-850 PTLS handles wheels up to 80kg weight picks up from the floor and places on wheel balancer or tyre changer
• Three axes universal motion saves time and operator fatigue

Manual vertical car tyre spreader (MT-850-vts)

Features:

• Adjustable tyre spreaders
• 4 tilt setting
• 360 swivel top

Product Description:

The vertical manually - operated tyre spreaders are widely used for all type of tyre ranging from cars to light truck.

We are engaged in offering body repair equipment that is widely appreciated for its quality standards. Our range includes portable spot welding machine, plasma cutting machines and Co₂ mig semi-automatic welding centre. Our portable spot-welding machine is provided with automatic voltage monitoring and control and offers protection against overheat. Our and Co₂ mig semi-automatic welding centre has a digital display, multi-layer bridge commutation and is equipped with heat-able decompression meter.

The features of our body repair equipment are enlisted below:

Portable spot welding machine (MT-SW-1460)

Features:

• Automatic voltage monitoring and control
• Over-heat protection
• Single side and double side welding selectable
• Air filter, lubricator and regulator
• Triangle washer direct projection welding
• Unique double sides welding electrode as option

Portable spot welding machine (MT-SW-1470)

Features:

• Automatic voltage monitoring and control
• Over-heat protection
• Welding tips for vertical pulling is available
• Adopts precise time adjustment system
• Welding functions for different plates such as heat, meson vertical pulling, spot welding, flatten, waveform line, stud, OT type pulling washer, triangle washer
• Digital displays
• Large scale pull strength and ripple line weld

Plasma cutting machine (MT-PC-1650)

Features:

• Over-heat protection
• Choice of cutting torches
• Infinitely variable current controller
• High frequency fast arcing
• Stainless steel, iron, aluminum, steel alloy

Co2 mig semi-automatic welding centre (MT-MW-1550)

Features:

• Unique function for automatic control for output current
• Digital display
• Multi-layer bridge commutation
• 4-roller wire feeding mechanism
• Equipped with heatable decompression meter
• Electric arc adjustment
• High quality weld bead

Co₂ mig semi-automatic welding centre (MT-MW-1560)

Features:

• Unique function for automatic control for output current
• Digital display
• Multi-layer bridge commutation
• 4-roller wire feeding mechanism
• Equipped with heatable decompression meter
• Electric arc adjustment
• High quality weld bead

We are one of the renowned manufacturers and exporters of body paint equipment that finds wide application in automobile industry. Our range infrared lamp is available in three models such as MT-il-1, mt-il-2 and MT-il-3.

Fabricated using aluminum alloy and bright stainless steel our range of infrared lamp (MT-il-3) is fully automatic with LCD digital electric timer and has adjustable pulse ultrasonic paint baking system. Having different baking area as per requirement the infrared lamp is optionally equipped with Philips or Vpower 21 quartz short wave infrared light tubes.

The features of our infrared lamp are given below:

Infrared lamp (MT-il-1, mt-il-2)

Features:

• Choice of single tube or double tubes
• Full-automatic with electric timer
• Holding stand allows side to side, up and down movement; can reach car body roof too
• Made from aluminum alloy, bright stainless steel and other special materials
• Single phase 220v 5/10A, 50Hz, Single tube 1100W, Double tubes 2200W
• Baking area : 800X500mm, 800X800mm
• Temperature : 400C - 750C
• Time setting range: 0min - 60min
• Optionally equipped with Philips or Vpower 21 quartz short wave infrared light tubes
• Distance measuring function available optionally

Infrared lamp (MT-il-3)

Features:

• Made from aluminum alloy, bright stainless steel and other special materials
• Pneumatic lift, turning by 3600 , independent switch
• Single phase 220v 5/10A, 50Hz, Single tube 1100W, Double tubes 2200W
• Adjustable pulse ultrasonic paint baking system
• Temperature controller; temperature range - 400c - 750c
• Optionally equipped with Philips or Vpower 21 quartz short wave infrared light tubes
• Full-automatic with LCD digital electric timer
• Distance measure function, available optionally
• Baking area 1200 X 1000mm
• Time setting range : 0min. - 60min

Catering to the demands of workstations, we offer quality array of lubricating equipment. Our array includes:

• AC Recycling MT-AC-1850FA (Fully automatic)
  
• MT-AC-1850SA (Semi automatic)
  
• Lubricating oil cleaning machine (MT-OCM-1855)
  
• Automatic Transmission Changer (MT-TC-1890 (pneumatic)
• Engine Coolant Cleaning Machine (MT-ESC-1895 (pneumatic)
• Brake Oil Changer (MT-BOC-1900)
• Spray gun washer (NT-SGW-1920)
• Collecting oil machine (MT-OCM-1863)
• Collecting oil machine (MT-OCM-1860)
• Foam Cleaning Machine (MT-FCM-1910)
  
• Lubricating Oil Filler (MT-LOF-1870)

The lubricating equipment is widely used for refrigerant recovery, refrigerant recycling and refrigerant charging.

General functions:

• Refrigerant Recovery: recovery the refrigerant to a tank
• Refrigerant Recycling: separate the refrigerant from oil and water, and purify it for reuse
• Refrigerant Charging: preset charging quantity, and charge refrigerant
• Leakage Test: test leakage in the AC system under vacuum
• Oil Charging: Preset charge quantity and charge oil