We formulate and supply optimum quality epoxy floor coating through our advanced manufacturing unit. Our range of floor coatings is available with the following special features such as:
 

• Excellent  corrosion resistance
• Adhesion  to the bare metal, concrete
• Resistant  to industrial chemicals, water and petroleum products
• Excellent gloss retention

Application areas of our floor coatings are mentioned in the tabulated form:
 

Metcon  Product Selection	Recommended  Application
MCC 2704 FC Epoxy Special Primer	100% Epoxy primer with excellent corrosion resistance and   adhesion to the Bare Metal, Concrete etc. It is suitable of base coat primer   for any flooring system.
Metcon MCC-2700    Epoxy Top Coat	A tough, Hardwearing Coating which provides an excellent  resistance to industrial chemicals, water & petroleum products and  excellent adhesion to bare metals and treated surfaces.
Metcon MCC 2800 (FS) Floor Screed	Has mechanical properties greater than concrete within 24  Hrs of Application.  It provides  excellent resistance to a wide range  of industrial chemicals.  It is a three  component epoxy based screed designed for resurfacing & Repair of Concrete  Surfaces..
MCC  2706 FC Epoxy Floor Coating	Epoxy Floor Top Coat providing a joint less, Oil &  Water Resistant covering when applied over Epoxy Floor Screed.
MCC 2800 (FS) Chemical &   Abrasion  Resistant  Epoxy   Floor  Screed	Screed Designed for resurfacing and repair of concrete  surfaces.  It offers outstanding  Abrasion and impact resistance is also an ideal material for forming coving  at Floor/Wall interfaces.
Mepoxy SL 2706	Provides a seamless washable hygiene floor top coat with  excellent aesthetic appeal and gloss ideal as Top Coat for clean room in  Pharmaceuticals, Electronic Assembly Units, Hospitals, Flight Kitchens, Food  Processing Units, Engineering Units, Breweries etc.
MCC-  2507 XE   1 K PU Clear Primer	Bonds with a variety of surfaces such as Mild Steel,  Castings, Painted Surfaces, Concrete, Wood, and a Good   Range of Non – Ferrous Metals.  MCC -2507 XE Primer Coat prevents Creep Corrosion, Pitting and Moisture  Ingress. The Primer is compatible with wide range of Solvent & Water  Based Top Coats.

We provide premium quality coat primer, wall coat, waterproofing membrane coating, waterproof coatings, wall sealant and many more in our hospital and cleanroom sterile finishes. Our range is widely used across various applications forthe following properties such as:
 

• Water resistance
• Dirt resistance
• Zero  volatile organic content

Some of the application areas of our hospital and clean roomsterile finishes includes the following:         
 

Metcon  Product Selection	Recommended  Application
MCC 5109 Tough Coat Primer	The Primer fulfils low VOC requirements in clean room wall  applications; strengthens substrate and receives Water Borne Polyurethane  Wall coatings.
MCC 5160 Aqueous Polyurethane Wall Coat	Provides Clean Room Wall finish with dirt stain and water  resistance. The coating is available with permissible Biocides for use in  Food processing & Grain storage, Pharma = Sterile Area Coatings, Drugs  Production, Storage, Packaging. Best Suited for Sugar,  Alcohol ,Beer  and Beverage Bottling Plants
MCC 5161 EX Elastocoat Decorative Waterproof Membrane  Coating	Provides Electrometric Wall coating for walls subject to  condensation, Sterile treatments.
MCC 5152  Glossy  &  MCC 5153 Matt Aqueous Polyurethane Wood Lacquer	Meets with the industrial demand for Zero Volatile Organic  Content (VOC). Highly suited for door paneling required in Clean Room  Finishes.
MCC – 3201 Oil, Stain, Dirt and Water Repellent Clear  Lacquer	A thin film coating for External and internal Painted for  maintaining New-like, dirt & Stain free looks.  Best suited for Hospitals, restaurants,  Industrial kitchens and any surface in need of excellent washability.
Crackseal MCC-007 Masonry Wall Sealant	Polymeric Sealant for waterproofing and jointing crevices  in Clean Room and Masonry applications.
Polycem MCC 124	Meets the demand for Clean Room applications requiring  Dampness/ moisture sealer for arresting seepage from wall capillaries and  crevices.

  

Our wide rang of primers and coatings are formulated to meetthe stringent demands of water treatment plant. Widely used as protectivemeasures for piping and clarifiers, our primers and coatings have followingspecial features such as:

• Excellent  adhesion
• Moisture Tolerance
• Wear & impact resistance
• Gloss  retention
• Weather proof

Some of the recommended applications of our coatings andprimers are in tabulated form:

Metcon  Product Selection	Recommended  Application
MCC-2801 X Epoxy  High Build Solvent  less Coating	To improve barrier protection in off shore structures,  petrochemicals, paper mills, under water structures, pen stocks, cross  country pipelines…etc.  The coating is  a self priming layer and over coats is compatible. Protects M.S. and concrete  in confined areas and satisfies   Low  VOC requirements.
MCC-2802 Epoxy Polysulphide Coating	Provides excellent adhesion along with moisture tolerance  and electrometric properties to the Epoxy Coating. Highly suited for  underwater structures.
MCC -1103  Epoxy  Zinc Rich Primer	Long-Life Primer on steel under corrosive environment  especially in underwater structures. Primer for blast cleaned steel during  storage, fabrication and construction.
MCC-2907 High Build Polyurethane Coal Tar Coating	Is recommended for protection of MS /RCC substrate  subjected to continuous water immersion, exposure to marine environment, high  humidity or subsoil conditions.
MCC-2501 Vinac Copolymer Coating	A fast drying coating exhibiting  excellent color / gloss retention,  resilience, scratch hardness, weathering and resistance to mild acids,  alkalis and salt water.
MCC - 5160 XE Waterproofing Membrane For Masonry/ RCC/ M.S  substrate MCC – 2507 XE  1 K  PU  Clear Primer MCC -  2508 XE   I K PU Coal Tar Paint	Suited for weathering, water resistant, flexo-hard  features, bond strength, wear & impact resistance. The membrane will meet  the requirements of Water tank linings, cross country pipe wrapping and  impermeable lining for dyke walls and partitions..  The coating is designed to suit normal  traffic.

 

We formulate and offer premium quality wood coating using qualitative chemicals in the production process. Our range is available invarious grades to meet the exact requirements of application areas. Some of thesalient features of our wood coating include the following:

• Excellent   gloss
• Dust  & water resistant
• Chemical resistant
• Weather  resistant

Some of the application areas are given in the tabulatedform:
 

Metcon  Product Selection	Recommended  Application
MCC - 2905 PU 2K Wood Lacquer Related Products MCC - 2904 PU 2K   Wood Sealer Special Thinner for PU 2K Wood Lacquer	Decorative Coating in Glossy, Semi-Glossy, Matt furniture  Coating for Long Lasting & aesthetic good looks, silky smooth feel,  water, chemical, stain and weather resistant finish
MCC – 3201 Nanocoat	Dust, water stain and chemical resistant thin film lacquer  for wooden and steel furniture, Wooden partitions, parquet floors, stairways,  heritage wood-work, handicrafts, wood paneling, door- window frames and wood  shuttering. Imparts lasting new look to   painted and finished surfaces
MCC-2608 Acrylic 1K WoodcoatRelated Products MCC - 2609 Acrylic 1K Wood Filler/ Primer Special Thinner for Acrylic Lacquer	Economical & effective quick dry wood coating for  Industrial and Residential wood finishes, garden furniture, hand railings etc.  Suited for Timber, wood frames, Shuttering work and rapid production of  wooden handles and any type of lacquering requirements.
MCC - 2404  PU 1k  Wood Lacquer Related Products MCC - 2403  PU  1k Wood Sealer Special Thinner for PU 1K Wood Lacquer	Wood lacquer in glossy, semi glossy and Matt finishes for  Indoor and Out door use. Best suited for waterproof, decorative and termite  resistant coatings required for MDF Panelling, Flush doors, water splash  zones , Wooden planks & rafters in   roof construction for   bungalows, cottages and houses in hill stations.
MCC 5152 /5153 PUD Wood Lacquer MCC  5150 Aqueous  Wood Sealer	Environmentally friendly, low VOC Waterborne PU dispersion  Coating for Wooden Furniture in Glossy and Matt Finishes. Excellent water,  stain and weather resistance for indoor and out door furniture.

 

We formulate and provide optimum quality corrosion preventive coatings. Our coatings are manufactured using best chemical available through the sophisticated manufacturing unit. Some of the salient features of our primer corrosion preventive coatings include the following:

• Adhesion  to bare metals and treated surfaces
• Excellent  resistance to industrial chemicals, water & petroleum products
• Resistant to Hydraulic oil and Transformer oil
• Excellent gloss retention.                               
  

The application areas of our corrosion preventive coatingsare given in the tabulated form as below:       
           

Metcon  Product Selection	Recommended  Application
MCC-2902 PU Aliphatic Finish Coating	Aliphatic Acrylic Polyurethane Coating is specially  formulated for exterior coating where high gloss, aesthetic appearance along  with excellent gloss retention excellent durability are desired
MCC-2700 Epoxy Top Coat	A tough, hardwearing coating which provides an excellent  resistance to industrial chemicals, water & petroleum products and  excellent adhesion to bare metals and treated surfaces
MCC-1109 Air Drying Synthetic Oil Resistant Primer	It gives excellent adhesion to mild steel and wooden  surfaces. After complete curing it gives a tough film which provides a long  term protection against mild atmospheric conditions. It is resistant to  Hydraulic oil and Transformer oil
MCC-2801 X Epoxy   High Build  Coating	Used as Epoxy coating to improve barrier protection for a  range of anti corrosive coating system in a wide range of environments  including off shore structures, Petrochemical plants pulp & paper mills. Suitable for use in both maintenance and new construction  as part of an anticorrosive coating system
MCC -2907 High Build Polyurethane Coal Tar Coating	Coal Tar based polyurethane coating is recommended for  protection of MS/RCC Substrate subject to continuous water immersion or  exposure to marine environment or high humidity or subsoil conditions
MCC-2700 CT Epoxy Coal Tar Coating	Self priming coating forming a flexible and tough coating  which provides an excellent resistance to industrial chemicals, water &  petroleum products and excellent adhesion to bare metal and treated  surfaces.  The product being self  priming does not require a primer.

We offer a vast range of coating solution for vehicles. Our primers are formulated using premium grade chemicals. Our coatings prevent rusting, staining and corrosion to the vehicle. Owing to the various propertiessuch as high gloss and color retention our range is used in various areas. Theapplication areas are given in the tabulated form as below:
           
 

Metcon  Product Selection	Recommended  Application
MCC-1101 Epoxy Zinc   Phosphate Primer	A versatile Primer for protection of vehicles Bodies and for ensuring adhesion of Decorative top coats
MCC 5166 Bed Liner For Cargo Carrier	Eco-friendly bed liner for use on all types of goods  delivery vehicles.  The liner forms a  tough barrier between metallic floor and movable loads.
MCC-2501 Vinac Copolymer coating	Vinac Copolymer Paint is a fast drying coating exhibiting  an excellent color / gloss retention, elasticity, scratch hardness,  weathering and resistance to mild acids and alkalis and salt water.
MCC -2405 Fast Drying Finish Paint	Used in the vehicle refinishing field as it has very fast  drying properties and it exhibits very good Color retention properties. It shows excellent adhesion on the treated M.S. Substrate.
MCC 2903 X Clear Vehicle Lacquer	Clear vehicle lacquer is designed to protect goods and  commercial vehicles from dusting staining and corrosion damage in rough  terrain and in day-to-day use
MCC 2902 X Polyurethane Top Coat	Aliphatic Acrylic Polyurethane Coating is specially formulated for exterior coating where high gloss, aesthetic appearance along with excellent gloss retention excellent durability are desired

 

Our machinery paints are available in wide range to meet the exact requirements of various industrial applications. Formulated using qualitative chemicals, our machinery paints offer excellent protection to the outer surface. Some of the salient features of our machinery paints are as follows:

• Resistance to industrial chemicals, water & petroleum products
• Excellent adhesion to bare metals and treated surfaces
• Dust repellent

Our machinery paints such as rimers, epoxy top coat, paints and many more has following application areas:   

Metcon Product Selection	Recommended Application
MCC- 1101 Epoxy Zinc Phosphate Primer	Suitable Primer For Almost All The Topcoats Including Polyurethane, Epoxy, Vinyl, Acrylic, Synthetic & Fast Drying Finish Paint, Etc.
MCC-2700   Epoxy Top Coat	A Tough, Hardwearing Coating Which Provides An Excellent Resistance To Industrial Chemicals, Water & Petroleum Products And Excellent Adhesion To Bare Metals And Treated Surfaces.
MCC-1110 Primer For Polypropylene parts	Air Drying  Primer,Specially formulated For Polypropylene  Plastic Surfaces. It Offers An Excellent Intercoat Adhesion Forming An Efficient Tie-Coat Between The Bare Plastic Substrate And Finish Coat Based On Polyurethane.
MCC-2902 Aliphatic Polyurethane  Paint	Recommended For Original Equipments, Machine Coating Applications, Steel Superstructures In Automotive Coatings And Maintenance Of Plant Steel Structures Exposed To Heavy Chemical Spillage & Corrosive Atmospheric Conditions
Metcon MCC-100  Polyster Putty	The putty when applied provides good adhesion to primed metal surfaces and composite materials with good homogeneity & smooth sanding properties. Used as a filling putty for OEM finished steel and car patch
MCC-2501 Vinac Copolymer Coating	Vinac Copolymer Paint Is A Fast Drying Coating Exhibiting An Excellent Color / Gloss Retention,
MCC-1131  Stoving  Paint	Priming-Cum- Finish Paint, Provides Excellent Adhesion To The Bare Mild Steel Along With An Excellent Flexibility, Impact Resistance And Hardness.
Nanocoat  MCC 3201 Lacquer	The Coating Provides Higher Protection Even At Low Paint Film Thickness As Low As 5  - 8 Microns.  This Property Is Necessary For Providing Water Repellency And Dust Repellency Over Externally Painted And Finished Surfaces.

     

We formulate and offer premium quality architectural &decorative finishes for wide assortment of industries. Our coatings areavailable in wide range as per the specific requirements of the industries.Some of our outer coatings comprises of tough shield paint, coat primer, wallcoat, exterior coating, dust, stain and water repellent clear lacquer and manymore.
 
Some of the salient features of our coating include thefollowing:

• Offer durability to the application area  
• Excellent  color retention property
• Scrub and stain resistance
• Alkali & chemical resistance
• Eco-friendly wall paint
• Washable
• Resistant bacterial growth
• Excellent  hardness & elasticity properties
• Good adhesion to concrete
• Excellent weathering resistance
• Very good Gloss Retention.

Some of the application areas of our coatings are describedin the table.
 
 

Metcon  Product Selection	Recommended  Application
MCC -5110 Tough Shield paint	Outstanding durability & protection to the exterior  surfaces.  Excellent color retention in  white & pastel color  Excellent  scrub resistance & stain resistance
MCC - 5109  Tough Coat Primer	Very good alkali resistance. Excellent percolation on  cement  plastered surfaces, with  outstanding sealing and Priming qualities   Very good water resistance
MCC - 5160  Aqueous PU Wall  Coat	Eco-Friendly wall  Paint, highly dirt repellent washable and resists Bacterial growth. Available  in light fast and UV resistant finish for Exteriors and Interiors.
MCC – 2604  Acrylic copolymer fast drying  exterior  coating	The coating has excellent adhesion to the concrete and  masonry and stone structures with excellent hardness, elasticity and other  mechanical properties.
MCC–3201 Dust, stain and Water Repellent  Clear Lacquer	Imparts excellent weathering & chemical  resistance to painted surfaces, lacquered surfaces,  wood, stone masonry , Roof Tops and M.S. Structures
Polycem MCC -  124	Highly adherent and  Eco-friendly product designed to complement strength properties of Repair  mortars, concrete slab construction and for water proofing completed  structures.
MCC-2903  PU Clear Lacquer Coating	Exterior Lacquer for high gloss, durable good looks,  and Weather proofing of Heritage  Structures, Architectural Monuments, Stone-Finish Buildings, Brass, Copper,  Silver coating for lasting  sheen and luster.

Backed by our industrial experience we are able to formulateand offer optimum quality RCC masonry protective treatment. Our wide range is appreciated for the following special features:

• Carbonation  Resistant Coating
• Resilient  and withstands bending
• Offers  rapid drying and stacking
• Water Resistant
• Anti-corrosive
• Wear  resistant

Some of the recommended applications of our RCC masonryprotective treatment comprise of the following:
 

Metcon  Product Selection	Recommended  Application
MCC 2704 FC  Epoxy  Special Primer	RCC Repair Mortars,   Grouts & Footings, Adhesive for Concrete Restoration, cladding
MCC 2501 Vinac Re-Bar Coating	Excellent adhesion and protection to Re-Bars. Has very  good Re-coatability. The coating is Resilient and withstands bending. Offers  rapid drying and stacking features to steel. Best Suited for Form-Works and  Scaffolding, Props, Bracings and Concreting Machinery
MCC–2604 Vinyl Copolymer   Coating	Carbonation Resistant Coating; Fast drying Decorative  & Water Resistant Coating for Buildings, Factories, Wood Furniture,  Panels & Partitions. Non-Chalking, UV Resistant Paint. Impermeable  &  Attractive Silky sheen  Finish  Paint for Buildings and  Architectural facade
MCC-2507 XE 1K PU Clear Primer	Bonds With A Variety Of Surfaces such as mild steel,  castings, painted surfaces, concrete, wood. Surfaces retain their water and chemical  barrier against pitting, moisture percolation and corrosion damage.
MCC- 2508 XE I K PU Coal Tar Paint	For application on  surfaces exposed to humid conditions, and tolerates presence of moisture in  concrete and masonry walls. Suited for anti-corrosive painting   of rails, wagons, water retaining  structures, conveyors exposed to saline and coastal conditions.
MCC-3201 Nanocoat	Durable dust and water repellent coating over concrete,  steel, wood furniture and roof- tops.   Suited for internal & external painted and finished surfaces.  Applicable for dirt repellency in clean  rooms, hospitals, hotels and food processing Areas.
MCC-2706 FC  Epoxy  Floor Coat	Waterproof and wear resistant coating for parking decks, Terrace   Garden and Planters painting for  luxury hotels and Independent Luxury houses.
MEPOXY  FC-2707  Epoxy Floor Coating	Slip Resistant coating for   parking decks, airport runways, shopping  malls and wet floors. Provides grip required for ship decks and floors.