My-T-Lok® 312 is a medium viscosity, low strength, anaerobic adhesive.
My-T-Lok® 312 is used to lock and seal screws, nuts, bolts and studs, in a wide variety of applications where easy removal is necessary. Also for very large diameter screws like damper assemblies of railway bogies.
My-T-Lok®322 (Medium Strength Threadlocker)
My-T-Lok® 322 is a medium viscosity, Thixotropic, low to medium strength designed for general purpose locking and sealing of threaded fasteners which require easy disassembly with standard hand tools.
Suitable for adjustment of set screws, small diameter or long engagement length fasteners, where easy disassembly is required without shearing the screw.
Lock and seal nuts, bolts, and studs in a wide variety of applications where easy removal or adjustment is necessary.
My-T-Lok ® 332(Medium Strength Threadlocker)
My-T-Lok® 332 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absense of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.
Lock and seal coarse threaded studs in a wide variety of applications where medium locking strength is required and where disassembly with hand tools is desired. Suitable for applications on less active substrates such as stainless steel and plated surfaces
My-T-Lok®333 (Medium Strength Threadlocker)
My-T-Lok® 333 is designed as thixotropic antisag threadlocker meant, for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absense of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.
Lock and seal coarse threaded studs in a wide variety of applications where medium locking strength is required and where disassembly with hand tools is desired. Suitable for applications on less active substrates such as stainless steel and plated surfaces. Its antisag property helps in application on vertical surfaces
Viscosity: Measured with Brookfield Viscometer using specific spindles and at various rpms, generally at 20 and 2.5 rpm for thixotropic fluids or else only at 2.5 rpm. In any case refer to the TDS of the grade for detailed information.
Curing Time: Handling strength means that at least 20% of the strength has been achieved. Usually the parts can be handled after elapse of such time for other assembly operations. Functional strength means that at least 70% of the strength has been achieved. The assembly can be subjected to loads. Full strength is achieved in 24 to 72 hours. The values are for M10 phosphated Nut and Bolt assembly. Factors which can inlfluence cure speeds are material surface; Copper and Copper alloys will give faster cures, inactive surfaces like zinc cadium, SS will give slower cure speeds.
Pressure Sealed: Tested as per BIS test Jig for Hydraulic pressure resistance.
Service Temprature: This is the useful service temperature range. At the maximum the strength of the adhesive can be as low as 35% of the RT strength. At low temperatures the polymer can become very brittle for certain applications. The user is advised to conduct tests before using the products at extreme temperatures. Metlok can offer specialty and tailor made products for extreme temperatures.
Viscosity: Measured with Brookfield Viscometer using specific spindles and at various rpms, generally at 20 and 2.5 rpm for thixotropic fluids or else only at 2.5 rpm. In any case refer to the TDS of the grade for detailed information.
Curing Time: Handling strength means that at least 20% of the strength has been achieved. Usually the parts can be handled after elapse of such time for other assembly operations. Functional strength means that at least 70% of the strength has been achieved. The assembly can be subjected to loads. Full strength is achieved in 24 to 72 hours. The values are for M10 phosphated Nut and Bolt assembly. Factors which can inlfluence cure speeds are material surface; Copper and Copper alloys will give faster cures, inactive surfaces like zinc cadium, SS will give slower cure speeds.
Shear Strength: Tested on a pin and collar assembly as per the procedure laid down by BIS 13055.
Service Temprature: This is the useful service temperature range. At the maximum the strength of the adhesive can be as low as 35% of the RT strength. At low temperatures the polymer can become very brittle for certain applications. The user is advised to conduct tests before using the products at extreme temperatures. Metlok can offer specialty and tailor made products for extreme temperatures.
Viscosity: Measured with Brookfield Viscometer using specific spindles and at various rpms, generally at 20 and 2.5 rpm for thixotropic fluids or else only at 2.5 rpm. In any case refer to the TDS of the grade for detailed information.
Curing Time: Handling strength means that at least 20% of the strength has been achieved. Usually the parts can be handled after elapse of such time for other assembly operations. Functional strength means that at least 70% of the strength has been achieved. The assembly can be subjected to loads. Full strength is achieved in 24 to 72 hours. The values are for M10 phosphated Nut and Bolt assembly. Factors which can inlfluence cure speeds are material surface; Copper and Copper alloys will give faster cures, inactive surfaces like zinc cadium, SS will give slower cure speeds.
Break Away Torque: Tested as per BIS 13055. It is the torque measured at the first relative movement of the bonded M10 nut and bolt where the bolt tension is zero (Unclamped bolt). This is the measure of absolute torque augmentation expected on normal Break Loose Torque, which is the torque required to unseat a clamped bolt. It is indicative of the adhesion strength of the grade.
Prevailing Torque: This is the maximum resistance offered when an unclamped bolt is rotated through 360 degrees. Tested as per BIS 13055. It is an indication of the cohesive strength of the polymer formed.
Pressure Sealed: Tested as per BIS test Jig for Hydraulic pressure resistance.
Service Temprature: This is the useful service temperature range. At the maximum the strength of the adhesive can be as low as 35% of the RT strength. At low temperatures the polymer can become very brittle for certain applications. The user is advised to conduct tests before using the products at extreme temperatures. Metlok can offer specialty and tailor made products for extreme temperatures.
My-T-Bond® 2602 is a heat curable one component high viscosity (paste), general purpose epoxy Adhesive
Excellent strength and mechanical properties
Excellent resistant to a wide range of chemicals and solvents.
Acts as an electrical insulator.
Bonding metal, glass, ceramic, and masonry materials.
Suitable for low stress, high strength bonding applications of dissimilar material.
Bonding of Elements when assembling BIW in auto industries
My-T-Bond®2605
My-T-Bond® 2605 is a heat curable one component high viscosity (paste), toughtened epxoy Adhesive
Bonds metal,ceramic, where high impact strengths and shock absorbing strength is required.
Applicable for bonding magnets where high mechanical strength and high temperature performance is required
My-T-Bond®2607
My-T-Bond® 2607 is a high temperature heat curable, one component medium viscosity (paste), High strength and good impact strength industrial grade epoxy adhesive. It acts as an excellent electrical insulator.
Applicable in bonding of dissimilar material such as various metals, glass, ceramic, rubber and masonry materials where high mechanical strength and impact performance is required.
My-T-Bond® 2615
My-T-Bond® 2615 is a low temperature heat curable, one component high viscosity (paste) industrial grade epoxy adhesive. It has excellent resistant to a wide range of chemicals, solvents, and acts as an excellent electrical insulator and has excellent humidity resistance.
Applicable for Encapsulation and potting.
Bonding plastic, metal, glass, wood, ceramic etc.
My-T-Bond® 2616
My-T-Bond® 2616 is a low temperature heat curable, one component low viscosity industrial grade epoxy adhesive.It has excellent resistant to a wide range of chemicals, solvents, and acts as an excellent electrical insulator and has excellent humidity resistance.
Applicable for sealing, Encapsulation and potting.
Bonding plastic, metal, glass, wood, ceramic, rubber and masonry materials
My-T-Stick®Yellow is a medium-to-long open time hot melt adhesive for use with general purpose applications. It is a yellow colored, economical grade, fast setting adhesive
My-T-Stick® is "clear / transparent" low cost hot melt adhesive with good adhesion to many porous substrates. Good in use where invisible or "hidden" bond line is important.
Medium to long open time
Fast setting
Water clear
Flexible, no cracking
Excellent bonding.
low cost
Fast setting packaging applications
Used for bonding wood, many plastics, fabrics, cardboard, paper felt, ceramics, crafts, floral products and many other porous and non-porous substrates.
Ideal for floral, craft and hobby applications
For bonding in electronic industries.
Good in applications where “hidden” bond line appearance is important
My-T-Sil® 910 is a claer, low viscosity, self leveling , neutral cure RTV silicone adhesives and sealant. It exhibits good adhesion to a variety of materials and substrates and stays permanantly elastic after curing.
Primary use is for coating potting and encapsulation of electronic circuits and electrical devices for protection against elements.
Securing delicate component in place.
My-T-Sil® 912 (Clear/ White Black)
My-T-Sil® 912 is a Acetoxy cure, non-slump general purpose RTV silicone adhesive and sealant.
It adheres to metals, plastics, ceramics glass, non-oily wood, painted surfaces, fibrous cement and concrete surfaces, natural & synthetic fibers, epoxies, silicones resins & rubber etc.
Used in applications Sealing joints in labs, expansion and connecting joints, Sealing joints in chemical industries and in Car body, windows
Caulking and filling joints in sheet metal ducting & equipment housing.
My-T- Sil® 913 (Clear / Black / White)
My-T- Sil® 913 is a industrial grade neutral cure, Non slump paste RTV silicone adhesive and sealant with excellent resistance to oils and weathering.
For general purpose bonding and sealing
Making formed-in-place gaskets for gear boxes, compressors or pumps.
Sealing air conditioner units, exterior flashing and duct work.
Bonding brackets, nameplates, and gaskets in industrial applications.
For extended performance at higher temperatures sealing and encapsulating heating elements in appliances, caulking sheet metal stacks, ductwork and housings, sealing pipe joints, and high temperature flues or access.
Altraset® 502 is a low viscosity UV cure adhesive bonds and seals glass to glass, glass to metal components such as precision optical instruments, furniture and industrial devices. The product is solvent free and cures when exposed to most types of ultraviolet lights ranging from low intensity black lights to high intensity mercury vapor lamps/ bulbs.
For Coating /Bonding glass , metal , unitizing electrical devices, appliance parts and decorative components.
It is also suitable for potting and tacking applications.
H. P. International Limited Manufacturer and supplier of adhesive sealants, pipe adhesive sealants, plastic pipe adhesive sealants, industrial pipe adhesive sealants and PVC pipe adhesive sealants. Also supply PVC solvent cement, UPVC solvent cement and CPVC solvent cement.
Processing...
