 |
Orthopedic Equipments
|
Our organization is engaged in manufacturing and exporting quality range of orthopaedic implants such as reconstruction plate, mini implants, interlocking femoral nail, interlocking tibial nail, orthopedic implants, cancellous screws, orthopedic equipments and orthopedic screw. These are manufactured in compliance with the international standard to ensure optimum quality in the final product. Owing to its quality features we cater our range of orarthopaedic implants in hospitals, nursing homes medical institutes.
|
 
| Orthopaedic Screws Our organization is engaged in manufacturing and exporting wide rage of orthopaedic screws as per the specific requirements of our clients. These are manufactured using high grade stainless steel and titanium to ensure effective performance at clients end. The range we have under this are as follows :
- 4.0 mm Cancellous Short Thread
- 3.5 Cortex Screw
- 4.0 mm Cancellous Screw Full Thread
- 4.0 mm Cannulated Screw
- 6.5 mm Cancellous Screws, Thread Length 16 mm
- 4.0 mm Carnulated Screw
- 4.5 Cortex Screw (310.014 to 060 with 2 mm difference)
- 6.5mm Cancellous Screws, Thread Length 32mm
|
 
Orthopedic Plates (4.5 mm Plates) Our organization is involved in offering wide range of 4.5 mm Plates such as screw driver with universal joint, bending iron for LC-DCP or DCP, DCP drill sleeve and screw driver hexagonal large. Our range is manufactured under the strict supervision of our quality auditors that facilitates quick and easy implantation in orthopedic surgery. The range we have under this are as follows :
- DCP 4.5 mm Broad
- DCP 4.5 mm Narrow
- LC-DCP 4.5 mm Broad
- LC-DCP 4.5 mm Narrow
- Semi Tubular Plate 4.5mm
- L-Buttress Plate Right Leg
- L-Buttress Plate Left Leg
- Lateral Tibial Head Buttress Plate, Right Leg
- Condylar Buttress Plate 4.5mm Right Leg
- Lateral Tibial Head Buttress Plate 4.5 for Left Leg
| |
| Small Fragment Implants Our organization is involved in manufacturing and exporting wide range of small fragment instruments and implants as per the demands of our clients. Being an ISO certified company we lay special attention to ensure safety at clients end. This helps in increasing mobility and reducing pain. The range we have under this are as follows :
- LC-DCP 3.5 Small
- Reconstruction Plates 3.5
- DCP 3.5 Small
- Cloverleaf Plate 3.5
- 1/3rd Tubular Plate
- T-Plate 3.5 Right Angled
- T-Plate 3.5 Oblique Angled
|
Small Fragment Instruments We are engaged in offering quality range of small fragment instruments such as tap handle with quick coupling, drill bit for quick chuck and sharp hook. These are manufactured in accordance with the international standard to ensure optimum quality in the final product. Our small fragmented instruments are completely hygienic and deliver optimum performance. The range we have under this are as follows :
- T-Handle with Quick Coupling
- Counter Shaft 3.5
- Drill Bit for Quick Coupling
- Tap for 3.5 Cortex Screw
- Tap for 4 mm Cancellous Screw
- Drill Bit for Jacob Chuck
- Tap Handle with Quick Coupling
- Holding Sleeve
- Double Drill Sleeve 3.5 / 2.5
- Insert Drill Sleeve 3.5 / 2.5
- Screw Driver Shaft Hexagonal Small
- Sharp Hook
- Hexagonal Screw Driver Small with Groove
- Depth Gauge for 2.7 & 4.0 m Screw
- Bending Piler for Reconstruction Plate 2.7 & 3.5
| |
| Basic Instrument Set for LC-DCP 4.5mm We are engaged in offering quality range of basic instrument set for lc-dcp 4.5mm which include drill sleeves, screw driver shaft,, and many more. the surgical procedures for each implant involve removal of the damaged joint and an artificial prosthesis replacement for which our range is considered perfect. The range we have under this are as follows : - Double Drill Sleeve 6.5 / 3.2
- Screw Driver Hexagonal Large
- Double Drill Sleeve 4.5 / 3.2
- Screw Driver Shaft Hexagonal Large
- Insert Drill Sleeve 4.5 / 3.2
- Screw Driver with Universal Joint
- Combination Wrench 11.0 mm
- Depth Gauge for 4.5 to 6.5 mm Screw
- Sharp Hook
- Socket Wrench 11 mm
- Bending Iron for LC-DCP / DCP
- DCP Drill Sleeve 4.5 mm
- LC-DCP Drill Sleeve
- Universal Drill Sleeve 4.5 / 3.2
|
Mini Implants The wide range of mini instruments and implants offered by us are widely appreciated as these conform to international standard. These are used to replace damaged or troubled joints. These are manufactured using quality raw material necessary to assure the safety and effectiveness of the device. The range we have under this are as follows :
- DCP 2.7mm
- Mini Plate 2.0mm St
- Quarter Tubular Plate 2.7
- DCP 2.0mm
- L & T Plate 2.7mm
| |
| DHS / DCS Plates We are involved in offering extensive range of dcs plates that are manufactured in accordance with the international standard. Therefore, we cater to the various needs of hospitals, nursing homes and medical institutes. It reduces the blood loss and leaves minimum operation scars on the body.
The range we have under this are as follows :
- dcs plate 95° barrel length 25mm
- dhs 130° / 135° / 140° barrel length 38mm
- dhs trochanter stabilizing plate
- dhs / dcs screw
- dhs / dcs coupling screw
|
DHS / DCS Instrument We are involved in offering quality range of DHS, DCS Instrument & Implants such as DTH triple, coupling screw shaft, DCS angle guide and DHS or DCS Direct Measuring Device. Its plating system provides extra stability in maintaining primary and secondary reduction while preserving the periosteal blood supply by lowering the compression generated underneath the plate. The range we have under this are as follows :
- DHS / DCS T - Handle with Quick Coupling
- Guide Shaft
- DHS Triple Reamer
- DHS / DCS Centring Sleeve Short
- DHS / DCS Impactor
- DHS / DCS Centring Sleeve Long
- DHS / DCS Triple Reamer
- Coupling Screw Shaft
- DHS Angle Guide
- DCS Triple Reamer
- DHS / DCS Wrench
- DCS Angle Guide
- Coupling Screw Long
- DHS / DCS Direct Measuring Device
| |
| Interlocking Insertion & Extraction Instruments We offer extensive range of interlocking insertion and extraction instruments such as interlocking femoral nail, reamers heads and interlocking tibial nail. These find application in hospitals, nursing homes and medical institutes. These are manufactured using high grade raw material to ensure high performance and safety at clients end. Our range can also be customized as per the requirements of our esteemed clients. The range we have under this are as follows :
- 4.9 mm Locking Bolt, Self - Tapping St. Steel
- Interlocking Femoral Nail
- Interlocking Tibial Nail
- Reamers Heads
- Drill Bit 4.0 / 4.5 mm Dia, Length 225 / 200 mm for Quick coupling
- Protection Sleeve 11.0 / 8.0, Lenght 96 mm
- Drill Sleeve 8.0 / 4.5
- Trocar, 8.0 mm Dia, Lenght 110mm
- Large Distractor
- Interlocking Femoral Nail
|
|
 |
|
 |
|
© Metropolitan Surgical Works. All Rights Reserved (Terms of Use)