Our Vertical Baling Presses have a reputation of excellence for their quality, workmanship and reliability in the last 12 years. Our presses are available in single compression, double compression (with ejector cylinder & manual door) and Triple Compression, which are suited for all type of ferrous and non-ferrous light metal scrap materials like: stainless steel, M.S. scrap, aluminium, brass, copper and other industrial tin sheets. These presses are capable of compressing various leftovers, metal structural, HDPE/ PP woven sack bags, Animal feed block (Straw, Husk), Agriculture waste, wooden waste etc.

Salient Common Features:

• The production capacity ranges from 1 ton–8 tons per hour and more as desirable
• The operation of press is done by hand lever operated, semi automatic & fully automatic operation through PLC “Programmable Logic Control” (PLC) is provided in our baling presses are of international standard make offering maximum production flexibility , full compatibility with international standards
• The major components used in machine are of reputed companies and are easily available in India and abroad
• Shearing blades and replaceable wear-resistance plated can be provided for the long life of the feeding chamber
• All parts contacting the scrap is covered with 40 HRC hardness, 10 mm thickness having hardened sheet metal. Therefore machine life is lengthened
• Hydraulic pistons are designed to work under hard conditions and installed with the most suitable sealings
• In presses there are 2 compressing or 3 compressing systems. In 2 compressing systems; after the scrap is put in charging box, first cover lid compresses scrap it also closes the charging box, secondly main Ram moves forward and after pressing the scrap pushes the bale out
• All machine is rigorously tested prior to the delivery

For technical specifications, Please click on the image.

Our Double Compression Baling Press have a reputation of excellence for their quality, workmanship and reliability in the last 12 years. Our presses are available in single compression, double compression (with ejector cylinder & manual door) and Triple Compression, which are suited for all type of ferrous and non-ferrous light metal scrap materials like: stainless steel, M.S. scrap, aluminium, brass, copper and other industrial tin sheets. These presses are capable of compressing various leftovers, metal structural, HDPE/ PP woven sack bags, animal feed block (Straw, Husk), agriculture waste, wooden waste, etc.

Salient Common Features:

• The production capacity ranges from 1 ton–8 tons per hour and more as desirable
• The operation of press is done by hand lever operated, semi automatic & fully automatic operation through PLC “Programmable Logic Control” (PLC) is provided in our baling presses are of international standard make offering maximum production flexibility, full compatibility with international standards
• Shearing blades and replaceable wear-resistance plated can be provided for the long life of the feeding chamber
• All parts contacting the scrap is covered with 40 HRC hardness, 10 mm thickness having hardened sheet metal. Therefore machine life is lengthened
• Hydraulic pistons are designed to work under hard conditions and installed with the most suitable sealings
• In presses there are 2 compressing or 3 compressing systems. In 2 compressing systems; after the scrap is put in charging box, first cover lid compresses scrap it also closes the charging box, secondly main Ram moves forward and after pressing the scrap pushes the bale out
• All machine is rigorously tested prior to the delivery

For technical specifications, Please click on the image.

Our Triple Compression Baling Press have a reputation of excellence for their quality, workmanship and reliability in the last 12 years. Our presses are available in single compression, double compression (with ejector cylinder & manual door) and Triple Compression, which are suited for all type of ferrous and non-ferrous light metal scrap materials like: stainless steel, M.S. scrap, aluminium, brass, copper and other industrial tin sheets. These presses are capable of compressing various leftovers, metal structural, HDPE/ PP woven sack bags, animal feed block (Straw, Husk), agriculture waste, wooden waste, etc.

Salient Common Features:

• The production capacity ranges from 1 ton–8 tons per hour and more as desirable
• The operation of press is done by hand lever operated, semi automatic & fully automatic operation through PLC “Programmable Logic Control” (PLC) is provided in our baling presses are of international standard make offering maximum production flexibility, full compatibility with international standards
• Shearing blades and replaceable wear-resistance plated can be provided for the long life of the feeding chamber
• All parts contacting the scrap is covered with 40 HRC hardness, 10 mm thickness having hardened sheet metal. Therefore machine life is lengthened
• Hydraulic pistons are designed to work under hard conditions and installed with the most suitable sealings
• In presses there are 2 compressing or 3 compressing systems. In 2 compressing systems; after the scrap is put in charging box, first cover lid compresses scrap it also closes the charging box, secondly main Ram moves forward and after pressing the scrap pushes the bale out
• All machine is rigorously tested prior to the delivery

For technical specifications, Please click on the image.

Under this category we also offer the following:

• SINGLE ACTING: Usually limited to very small, short stroke cylinders used for holding & clamping. The length needed to contain the return spring makes them undesirable when a long stroke is needed.
  
  
• TELESCOPIC: These are available with upto 5 to 6 sleeves. Its collapsed length is shorter than standard cylinders. It is available either single or double acting. We manufacture upto 300 tons capacity.


Single Side & Both Side Type

Mishra make intensifier is designed to save energy, time, space and money in wide application. It is an efficient way of generating high pressure hydraulics fluid. Its operation is quite simple. Pressurized hydraulic air or oil-enters the intensifier and acts on a confined piston. This in turn drives a smaller diameter ram or piston to deliver a given volume of fluid. As a result, the output pressure is intensified and is considerably higher than the input pressure.

Spring Return-Single Acting Cylinders

Usually limited to very small, short stroke cylinders used for holding & clamping. The length needed to contain the return spring makes them undesirable when a long stroke is needed.

Gravity Return– Ram Type

It contain only one fluid chamber, this type of cylinders is usually mounted vertically. The weight of the load retracts the cylinder. Sometimes known as “displacement cylinders”, These are practical for long strokes.

Range

• Ram Dia.- 250 mm to 800 mm
• Stroke- 5000 mm (max.)

We offer high quality Hydraulic Double Acting Cylinders. Under this we offer:

Welded construction & Tie rod type

These are used when equal displacement is needed on both sides of the piston or when it is mechanically advantageous to couple a load to each end. The extra end can be used to mount cams for operating limit switched etc.

Range of Hydraulic Cylinders

Bore Dia.	40 MM to 600 MM (option upto 1000 MM)
Stroke	6000 MM (option upto 9000 MM)
Pressure	70, 140, 250, 315 BAR (option upto 350, 700 BAR)
Temperature	20º C to 80º C (option upto 200º C)
Mounting Styles	Differential type, The rod construction type, Mill type ( Rear flange mounting, Front flange mounting, Female Rear clevis mounting, Rear male clevis mounting, Rear male clevis with articulating bearing, Foot mounting, Front Trunion mounting, Centre trunion extended tie-rod mounting etc.

For technical specifications, Please click on the image.

We are a renowned firm engaged in manufacturing of Power Packs that are available in different capacities, various control options and configurations for a variety of industrial applications. These machines are cost effective and provide maximum productivity. Our Hydraulic Power Packs have different salient features and technical specifications. These include:

Technical Specifications:

• Input power- upto 200 Kw
• Flow rate- upto 1200 LPM
• Pressure- upto 500 bar
• Reservoir- upto 12000 liter

Salient Features

• Tested for best performance before delivery
• Custom built power units designed to meet specific requirement
• Manifold designs for minimum leakage, easy installation & maintenance
• Internationally accepted standard components are used
• Highly reliable, excellent aesthetic & functional quality
• Shorter order processing period due to large quantity of components held in stock

Application Areas

• Steel mills
• Machine tools
• Hydraulic presses
• Power station
• Mining
• Material-handling
• Drilling rings
• Steel works
• Pipe mills
• Hot and cold rolling industries
• Paper
• Sugar and paper processing machinery
• Construction
• General engineering industries

Deep Draw Presses: Double action deep draw pressed for stainless steel, kitchen sinks with & without bottom cushioning arrangement. Double action deep draw presses for LPG gas stoves, LPG cylinders, aluminium & S.S. utensils, geysers body, automobile parts, bath tubs, wheel, surgical items, decorated items, truck, car, bus, scooter body components.

Application

Rubber moulding, bakelite moulding, SMC (Sheet moulding), coir mattress pressing operation, blanking, coining, riveting, stamping, punching, assembling, forming, etc. Frame Structure

• Fabricated frame ‘H' type (Gate Type), Capacity 1 Ton-5000 Tons.
• Fabricated frame ‘C' type (Gate Type), Capacity 2 Ton-600 Tons.
• Pillar Type (Rounded & Square) Presses capacity 1 Ton- 1000 Tons.

Operation Mode

• Manual operated by hand lever valves.
• Semi automatic by electric control panel
• Fully automatic by PLC

For technical specifications, Please click on the image.

Compression Moulding Presses:

Compression moulding presses used for bakelite moulding, sheet moulding, thermosetting components, plastic sheets, plyboards, particle boards, rubber sheets, rubber mats including cat mats, medical parts, belts, conveyor belts, transmission belts, tyre tube & flap moulding, battery containers, oil seal compression, footwear, soul, straps, EVA sheets, switch gear.

Application

Rubber moulding, bakelite moulding, SMC (Sheet moulding), Coir mattress pressing operation, blanking, coining, riveting, stamping, punching, assembling, forming etc.

Frame Structure

Fabricated frame ‘H' type (Gate Type), Capacity 1 Ton-5000 Tons.

Fabricated frame ‘C' type (Gate Type), Capacity 2 Ton-600 Tons.

Pillar Type (Rounded & Square) Presses capacity 1 Ton- 1000 Tons.

Operation Mode

• Manual operated by hand lever valves.
• Semi automatic by electric control panel
• Fully automatic by PLC

For technical specifications, Please click on the image.

Hydraulic Multiday light Presses

• Rubber mats molding presses
• Rubber sheets molding presses
• Coir mattress molding presses
• Plyboards, particle boards, flush boards presses
• Deep drawing presses for aluminium parts.

Application

Rubber moulding, bakelite moulding, SMC (Sheet moulding), Coir mattress pressing operation, blanking, coining, riveting, stamping, punching, assembling, forming etc.

Frame Structure

• Fabricated frame ‘H' type (Gate Type), Capacity 1 Ton-5000 Tons.
• Fabricated frame ‘C' type (Gate Type), Capacity 2 Ton-600 Tons.
• Pillar Type (Rounded & Square) Presses capacity 1 Ton- 1000 Tons.

Operation Mode

• Manual operated by hand lever valves.
• Semi automatic by electric control panel
• Fully automatic by PLC

For technical specifications, Please click on the image.

Our company is known for our Hydraulic machines like Hydraulic Shearing machine that are available with the following features:

• Variable rack angle
• Fabricated body structure
• Reliable hydraulic systems
• Motorized back gauge arrangements
• Hydraulic holdowns- Positive holding by hydraulic holdowns before shearing avoids slippage of sheets avoiding damage to blades and undue loads on machine parts.

Specifications

• Capacity upto 20mm thickness and 150mm width.
• Machine body fabricated
• Application copper and aluminium

Our machines have quality blades (HCHCR/HCSR) and steel blades that have four usable edges. This makes them highly applicable for cutting lid steel and stainless steel. They also have interchangeable segments.

For specifications, please click on the image.

Our range of Hydraulic Bus Bar Presses are used for:

• Punching
• Bending
• Shearing

These are offered with the following specifications:

• Capacity upto 20mm thickness and 150mm width.
• Machine body fabricated
• Application copper and aluminium

For specifications, please click on the image.

We offer high quality Intensifiers and under this range we offer the following:

Single Side And Both Side Type

Mishra make Intensifier is designed to save energy, time and space and money in wide variety of application. It is an efficient way of generating high pressure hydraulics fluid. Its operation is quite simple. Pressurized hydraulic air or oil-enters the intensifier and acts on a confined piston. This in turn drives a smaller diameter ram or piston to deliver a given volume of fluid. As a result, the output pressure is intensified and is considerably higher than the input pressure.