Miven Mayfran Conveyors Private Limited

Product Discription These conveyors use a hinged steel belt moving inside a metal casing to effectively remove metal chips and they come in four basic profiles Straight ( Style A ), Inclined ( Style B ), Straight & Inclined ( Style C ) and Goose Neck ( Style D ). The hinge belt surface can be plain, perforated or dimpled in accordance with application requirement.

Magnetic Plain Sheet type conveyors use a band of magnets that moves inside a watertight casing under a non-magnetic slider plate. As the magnets mounted on endless chain moves, the chips are dragged on the slider plate, elevated and ped into chip trolley

This rugged conveyor is available in both the open type frame and closed type frame. The discharge chute can also be customized to suit the site conditions as well as specific customer requirements. The design also incorporates several safety features such as pull-cord for emergency stoppage, overload relay for motor etc. The heart of the system is the patented Mayfran hinged steel belt. This steel belt is constructed of die-formed 1/4" or 3/16" nominal thickness low carbon steel. Some of the other special features are: Double row high carbon die-punched side bars Plain or anti-friction bearing rollers Pin and sleeve hinge construction (steel or optional UHMW polyethylene tubing liner over pin through belt hinge joint) Hardened single flange rollers 3/16 ", 1/4" or 3/8" thick formed interlocking side wings welded to hinge links

When the length of a single unit exceeds 25 to 30 m, operating costs of a pushbar conveyor are lower than any other conveyor of the same capacity. The maximum length is 150 m.This conveyor also solves conventional problems such as winding of pusher rods as well as widely improves the conveyance distance and wear resistance. This cost effective equipment is Mayfrans high efficiency designed product which offers medium distance conveyance of long and short chips with high volume coolant. It is the ideal choice for a central conveyor.The automotive and bearing manufacturing industries are satisfied users and now the pushbar conveyor services the state of the art F.M.S Plants.To suit the required swarf removal capacity intervals between strokes can be set in the control pane. Tramp material and bar ends will not harm the conveyor since free moving, self centering bar design will avoid jamming and subsequent damage. The cylinder , powered by a hydraulic powerpack moves the conveyor bar. In installations with several pushbar conveyors a double acting powerpack is used offering considerable savings in initial costs.The modular design of the conveyor facilitates easy extension of the conveyor. All the conveyor components being manufactured on a production line basis, a tight fit and interchangeability of spare parts are guaranteed

This conveyor is exclusively designed to handle hot slag/ end pieces generated during flame cutting operation. The slats of the conveyor are Z formed out of 6mm thick steel plate to take the impact of slag falling from a height. The flanged roller chain on either side of the slat plate are made to Mayfrans proven design and is known to last for years.

Product Discription Chipbins are trolleys used to collect chips discharged from the conveyor. The simplest form of bin is a suitably sized trolley which is known as non-tilting type chipbin. On becoming full, these bins are required to be emptied by shoveling the chips into a collecting trolley. Inorder to avoid shoveling and thereby fatigue to the operator, tilting type chip bins are used. These chipbins are movable and are provided with foot pedal. When the chipbin is full, the bin can be tilted by pressing the pedal to unload the bin. In the tilted position, the chips can be easily emptied. Our experience in the field of chip and coolant handling has led to standardization of sizes keeping in view the general height of the machines/conveyors and handling comfort of the operator.

The Miven Desolventiser Toaster is a fully-automatic, with pneumatic controls on the gates and discharge. It is composed of only one single body unit and several floors, which form the desolventization and toasting stages. In the desolventization stage, steam injection is direct, with individual adjustments, through meat mixers.During toasting operation, steam rises counter-flow to the MARC, through special grills. Uncondensed live steam, hexane vapours and noncondensable gases in the system go through the tubes mounted on the Desolventization Stage. Special Features: Automatic control of meal bed height Material control, from one floor to the other is performed by an automatic level control system pneumatically commanded, with individual height adjustments which provides an even operation on each floor. The sealing system of automatic devices is performed by high quality seals and gaskets. Layer heights are read by level indicators located on the sidewalls of the D.T. Fully automatic meal discharge control The RURIS TECNAL D.T., besides its exclusive automatic control of the meal bed layer, presents a Discharge rotary valve with a ring bone speed variator pneumatic, running in accordance with flow variations within the planned settings

Product discription this is used for soya beans, cotton seed, wet corn germ, sunflower seed, rapeseed, salseed and many of the seeds and (fully or pre-pressed) oil cakes to make the meat porous and homogenous. meats are gradually pressed by the main worm shaft, which is a non continuous kneading screw rotating within the barrel. The speciality hardened scraper-bolts mounted between the worm sections permit uniform mixing of meats by kneading action. Meats while being processed receive steam, injected through special scraper bolts. pressure on meats reaches its maximum at the discharge end. As the material passes through the dies or autocone (auto-run) , pressure is suddenly released which causes the expansion

Product Discription This systems employs an indexing filter drum made from finely woven mesh to filter the coolant. A scraper chain removes chips from inside the unit. Separate float switches are provided to sense coolant levels inside the unit. The unit comes with added features such as a scraper cleaning arrangement and drip coolant catcher to enhance performance.Contaminated coolant from the machine flows into the filter by gravity/pump pressure. Heavier chips that settle down are carried away by the scraper chain. The floating fines are arrested on the outer surface of the drum forming a filter cake, which acts as a secondary filter media and the clean coolant flow out from the drum sides into the coolant tank. With the increase in the size of the filter cake there is a rise in the level of the coolant in the unit. Once a predetermined level is reached, the float switch actuates the drum drive and the drum indexes. Simultaneously the drum surface gets cleaned by a wiper and a high pressure coolant backwash. Special features1. Compact size2. Filter drum and scraper chain are driven independently resulting in lower risk of system and component failure, increased flexibility and ease in operation.3. Additional safetly features such as overflow detection alarm.4. Improved efficiency and performance because of scraper cleaning attachment and coolant drip catcher.

Wet chips coming out of the machine have to be properly dried before storage to ensure prevention of soil pollution by the coolant. An additional benefit is that expensive coolant can be reclaimed resulting in enormous cost savings.With more stringent pollution control laws being implemented, the Reclamet-3000 is best suited to cater to your chip processing needs by enhancing coolant lifetime which ensuring compliance with the environmental regulations.The Reclamet-3000 is an integrated turnkey solution with a shredder, tramp-material separation, swarf de-oiling and pneumatic conveying of dried swarf compact assembly.That we have more than proven installations working satisfactorily in India, speaks volumes about the reliability, quality and the value that it delivers to the customer

This equipment consists of two sets of rolls with helical grooves between which the cleaned seeds are passed through. The seeds are then cracked open to allow for further processing. a vane type feeder is used to uniformly feed the seeds over the entire length of the roll. By mounting the rolls and the drives on a single heavy frame structure the system has been made compact yet simple and the maintenance requirement also correspondingly comes down. special features quick roll opening mechanism which reduces the stress on the motor while starting. the arrangement of the rolls also allows large particles to pass through before immediately returning to the exact original position. the system provides for power balance between the two pairs of rolls thereby utilizing the full capacity of the motive power. Specifications specifications: tmq-35 a model : 2 pairs of rolls 350 mm x 1300 mm long capacity : 400 ton/day soya beans tmq-25 model : 2 pairs of rolls 250 mm x 1300 mm long capacity : 300 ton/day soya beans tmq 25 ab, 25 ac, 25 ad, 25 ae, 25 af to suit capacities from 250 300 tpd soya beans

Product Discription The machine is as per Ruris Tecnal design and specifications. Construction is modular type having flexibility to increase capacity when plant is expanded. Consists of feed section, cooling section and discharge section. Cooling sections can be increased to meet requirements of capacity. Equipped with S. Automatic cleaning device for fines trapped in the continuous chain. Air blown through radiators for cooling Suction fans connected to cyclones with rotary valves at cyclone discharge end with transverse conveyor to carry fines entering the cyclones. Meal bed height can be controlled to between 200 to 300 mm Large capacity screw conveyor at discharge end of cake cooler to convey cooled meal to bagging. Machine complete with appropriate drives. Specifications: Capacity from 30 to 2,000 mtd for deoiled meals of Soya beans beans Cotton seeds Corn germ Rape seeds Sun flower seeds Rice bran Palm kernel Many other raw materials

These Belt type oil skimmers find application in small tanks of a machine tool to remove tramp oil from emulsion coolant. The continuously running belt powered by a mini sized gearmotor effectively removes floating oil film from the coolant surface. An intermediate sedimentation tank helps further cleaning of coolant from oil. The oil thus separated gets collected in a small removable tray.

Gravity Roller Conveyors are built on slight inclined. Since there conveying power is simply the force of Gravity. The inclination depends upon the type of material that is being used. When the material is placed on the conveyor, the roller revolve, thus moving the material in the direction of incline. Powerised Roller Conveyors are used to carry load at controlled speed. Roll to Roll chain driven live roller conveyor are used where dirt, oil, grease and other contaminations are present. The driving chain or chains are at ends of the rollers and are shielded

The seed cleaner is used to clean seeds before they undergo further process treatment for extraction of edible oil.This high performance equipment is composed of a feeder, screeners, an aspiration system and a light trash collector. The feeder is of vane type that evenly spreads the grains on the sieve. Cleaned cereals are discharged through a stationary spout.

Product Discription Magnetic Roller Separator conveyor is an ideal separator for filtering ferrous fines from cutting oil. Its superior design features ensure an effective conveying and filterless cleaning simultaneously. It can handle high volume of ferrous chips-small, free flowing and broken chips upto 75mm long generated during milling, broaching, hobbing, gear cutting operations.A series of stainless steel rollers, each with a permanent magnetic core fitted along the length of the conveyor, are made to rotate axially. The strength of each magnetic core diminishes gradually in the rotational direction of the roller. Swarf is attracted by the magnetic core to the roller surface. As the roller rotates, the swarf moves into a progressively weaker magnetic field. The stronger field of next roller then pulls the swarf onto its surface. Through repetition of this process the separation and conveying is achieved. The swarf is discharged into chip trolley at the end of the conveyor and the coolant flows into tank.Specifications:Nominal Width :150 to 500mmCapacity :60 to 600 Kgs/Hr (Steel),

Based on the type of chips and application, Miven Mayfran offers a versatile product range of chip crushers to suit individual needs. Crushing of chips has some significant advantages Size reduction of swarf for subsequent centrifugation (drying of chips) and recovery the coolant from the chips Size reduction of chips for handling in over the floor-mounted return pump systems for the transport of chips and coolant Size reduction of the chips to feed them into briquetting presses Miven Mayfran crushers can run in automatic mode and are easy to service and repair due to over-dimensioning of bearings, shafts and couplings and this in turn ensures an extended lifetime of the equipment. The Chip Crusher models offered are : TA crusher-suited for small quantities MA crusher-suited for pump-stations for chip and coolant MSA crusher-for large clusters of hard and brittle swarf. SG crusher-for intermittent (batch) supply of chips

Product Discription The flaker consists of a pair of rolls through which the seeds are passed. Each roll runs at a different speed. Two pistons commanded by a hydraulic system exert pressure on the flaking rolls. Special Features: The maximum pressure during operation is 35 bar. Hence the life of the machine is very long. The roll bearings are mounted on bipartiate castings. This helps for easy maintenance and rolls can be removed without dismantling the hydraulic system. Scrapers mounted on tubular systems with a tension spring evenly scrape the flakes off the rolls

Oil seeds exist in the form of microscopic lets packed in cells with impermeable walls, which are distributed throughout the seed kernel. To facilitate easy flaking if the seed, it is necessary to cook the seed and reduce excess moisture to a desired level. The Miven Mayfran cookers are stack type cylindrical vessels which cook and dry seed. The cooker consists of a series of closed kettles stacked one upon another. Moisture in the for of live steam is injected in the lower kettles, which is absorbed by the seeds. The seeds are then cooked to proper consistency and dried to remove excess moisture before being finally discharged from the lower kettles.

This filter works on the principle of suction of coolant through the filter media. Once a filter cake is formed on the surface of the media, a vacuum is created which triggers the indexing of the filter media. Advanced engineering and manufacturing techniques ensure that the vacuum seals are maintained intact. Hydro-Vac can be equipped with either permanent or disposable filter media depending on applications. Continuous and fully automated, Hydro-Vac can be installed in above or below floor locations. This equipment is ahead of the pack when it comes to price performance ratio and space requirements